BURRIS ELIMINATOR 3 4-16×50 LASERSCOPE
BURRIS ELIMINATOR III 4-16x50 LASERSCOPE
Early in my shooting career I recall sitting around talking with fellow shooting friends about someday it would be great to see a riflescope with built in ranging to simplify scope use and increase range and accuracy. Of course these discussions were long before mobile phones and social media. Yes Im old. Today it’s a different world and high tech electronics have found there way into consumer riflescopes and the subject of this post the BURRIS ELIMINATOR III 4-16×50 LASERSCOPE delivers my “someday” wish to today’s modern rifle shooter.
The Eliminator 3 when setup for your ammunition will measure the distance to your target and automatically adjust for trajectory based on the measured distance. Burris offers an Eliminator Cartridge List with manufacturers 750 yard bullet drop data for most common ammunition.
Burris Eliminator III LaserScope 4-16x50mm
The Eliminator III LaserScope is the most innovative and effective hunting riflescope in the world. Combining outstanding optics, pinpoint laser rangefinding, and precision trajectory compensation for the exact ammunition you choose for your hunt, it eliminates most of the variables and guesswork that often cause hunters to go home empty-handed. In one fast sequence the Eliminator III determines the distance to your target, factors in your trajectory and illuminates the perfect holdover. It’s that simple.
The Eliminator III significantly extends the range and accuracy of your favorite rifle. No other riflescope combines the level of quality, technology, accuracy, repeatability, speed and effectiveness. It will greatly increase the distance at which you can make an ethical shot.
Built-In Laser Rangefinder
Laser range capability out to1,200-plus yards with reflective target, 750-plus yards with non-reflective target. Allows you to range your target without
carrying additional equipment. New model with remote cable switch makes ranging activation even easier.
Automatic Trajectory Compensation
Customized trajectory compensation calculates the perfect holdover at your exact distance; program your cartridge’s ballistics information, push a button and a bright-red, illuminated dot signifies your new aiming point. Trajectorycompensation works on any magnification.
Integrated Inclinometer
Integrated inclinometer adjusts for any angle on uphill or downhill shots.
Wind Hold-Off
Scope displays a 10 mph Wind Value to indicate wind hold-off for your specific cartridge at the indicated range to
target. Wind Value represents how many dots to hold into the wind for a 10 mph crosswind.
Strong, Low Mounting
Riflescope comes with its own bases that attach to any Weaver-style or Picatinny base. No rings required.
Easy Programming
The Eliminator III comes with a programming book, and there is a web site app to help get the precise programming numbers you need, based on your elevation, atmospheric condition, and cartridge of choice. Check it out here.
Burris Eliminator III Model Number 200119:
Eliminator III Model #200119 has some big changes over the other Eliminator III models:
- It features a Remote Cable Switch to activate the On/Range button from any position the shooter desires. The cable can be attached to either side of the Eliminator. The cable is a flexible coil, and has a length of 14-24 inches to accommodate various mounting positions.
- Model #200119 is also compatible with muzzle loader and low velocity cartridges (.300blk, rimfire, etc.). You are able to select 50, 100 or 200 yard zeros. The model #200119 is the only current Eliminator model with these abilities.
NOTE: It is not possible to alter or upgrade other Eliminator models to use the Model #200119 features. The remote cable is not available separately, and will not work on other models (it replaces the current mechanical switch with an electronic signal, which required an entirely new internal circuit system).
Visit Burris
PDF Downloads Below – Be patient some files are large
Burris Eliminator 3 Specifications
| Item Number: | 200116 (fixed switch) 200119 (remote cable) |
|---|---|
| Magnification: | 4-16x (200116 (fixed switch)) 4x-16x (200119 (remote cable)) |
| Reticles: | X96 Reticle |
| Objective Lens Diameter: | 65 mm |
| Clear Objective Lens Diameter: | 50 mm |
| Ocular Lens Diameter: | 42 mm |
| Laser Range: | 750 yds. (non-reflective) – 1200+ yds. (reflective) |
| Operating Temperature: | -15ºF – +122ºF |
| Finish: | Matte |
| Focal Plane: | RFP |
| Field of View: | 26 – 7 (ft. @ 100 yds.) |
| Eye Relief: | 3.5 – 4 in. |
| Exit Pupil: | 12.5 – 3.1 mm |
| Click Value: | 1/8 MOA |
| Elevation Adjustment, Total Capability: | 40 MOA |
| Example: 50 MOA is roughly 25 MOA from center. | |
| Windage Adjustment: | 40 MOA |
| Example: 50 MOA is roughly 25 MOA in any direction from center. | |
| Parallax/Focus: | Objective PA |
| Adjustable Parallax: | 50 yds. – infinity |
| Length: | 15.5 in. |
| Weight: | 30.4 oz. (200116 (fixed switch)) 30.4 oz (200119 (remote cable)) |
| Illumination Control: | Push-button |
| Illumination Settings: | 5 brightness settings |
| Battery: | CR123A |
| Mounting Rail Length: | 8.5 in. |
Burris Eliminator 3 Features
Burris Eliminator 3 Cartridge List
Download the Burris Eliminator 3 Cartridge List
[pdf-embedder url=”https://308ar.com/wp-content/uploads/2017/10/Burris-Eliminator-3-Cartridge-List.pdf” title=”Burris Eliminator 3 Cartridge List”]
Burris Eliminator 3 Quick Start Guide
Burris Eliminator 3 Manual
Burris Eliminator 3 Mounting Plate Guide
Links to Other 308 AR | AR-10 | AR 308 Content
Manufacturers | 308 AR Compatibility | Charging Handles | Carbon Fiber Barrels| Barrels | AR Rifle Build Guides | AR Receiver Selection Guide | Trigger Selection Guide | Bolt Carriers | Armalite AR-10 Rifle Parts | AR-10 Rifle Barrel Selection Guide | 308 Scope Selection Guide | Tools | Scope Mounts |
