MAGPUL PRS GEN 3 STOCK | MAGPUL PRECISION RIFLE STOCK
MAGPUL PRS GEN 3 STOCK
The Magpul PRS GEN 3 stock is a field precision rifle stock for 308 AR, AR308 and AR-10 platforms, featuring tool-less length of pull and cheek piece height adjustment.
With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN 3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting. Made in U.S.A. Visit Magpul.
Magpul PRS Gen 3 Stock Precision Rifle Stock Features
- Mounts to rifle-length receiver extension tube without A2 spacer but will also accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)*
- Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
- Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height
- Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
- Steel adjustment shafts finished with Melonite® for wear and corrosion resistance
- All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
- Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
- Sling Mounts
- Front/Rear – rotation-limited QD sling swivel mounts (swivels not included)
- Rear – 1.25″ aluminum sling loop (left-right reversible)
*NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to a rifle-length receiver extension is recommended to ensure optimal fit and function.
Magpul PRS Gen 3 Stock Precision Rifle Stock Specifications
- Weight: 27.8 oz.
- Weight, w/rifle receiver extension: 31.2 oz.
- Weight, w/carbine receiver extension: 31.7 oz.
- Length, max: 11.5-12.9 in.
- LOP Adjustment Range: 1.4 in.
- LOP, M16 Collapsed: ~14.3 in.
- LOP, M16 Extended: ~15.7 in.
- Cheek Height Adjustment Range: 0.8 in.
* Specifications based on factory configuration.
Magpul PRS GEN 3 Installation Instructions
Magpul PRS GEN 3 Installation Instructions
[pdf-embedder url=”https://308ar.com/wp-content/uploads/2017/06/Magpul-PRS-GEN-3-Installation-Instructions.pdf” title=”Magpul PRS GEN 3 Installation Instructions”]
Links to Other 308 AR | AR-10 | AR 308 Content
Manufacturers | 308 AR Compatibility | Charging Handles | Carbon Fiber Barrels| Barrels | AR Rifle Build Guides | AR Receiver Selection Guide | Trigger Selection Guide | Bolt Carriers | Armalite AR-10 Rifle Parts | AR-10 Rifle Barrel Selection Guide | 308 Scope Selection Guide | Tools | Scope Mounts |
Trying to remove this stock is a pain in my ass. I can’t get the stock off my buffer tube. If I try to unscrew the stock via the top rear screw, it unscrews my buffer from the lower receiver, when it should be unscrewing the stock from my buffer tube
Besides that, I don’t know whether the rubber butt pad (with the 2 horizontal screws and t-nuts) locks into the plastic that slides on & off of the aluminum, or if the rubber butt pad screws into the plastic piece AND the aluminum part? The t-nuts can slide into both. If it were marked that would be so helpful.
I tried disassembling the stock last night and unscrewed the rearmost 2 screws that go into the rubber butt pad, and all of a sudden 2 t-nuts fell out, and I don’t know how or where they go for reassembly. Bah!
Hi maybe this video can help https://youtu.be/h2SZacJZOyo