308 AR AR 10 Flash Hiders and Muzzle Brakes

  1. Home
  2. Parts

308 AR  AR 10 Flash Hiders and Muzzle Brakes

Below we will list some examples of the various Muzzle Brakes, Tactical Compensators and Flash Hiders for the Armalite AR10, DPMS LR-308 and other .308 Pattern AR rifles. If there’s anything I missed worthy of noting feel free to drop me a message.

Please help to support this site by clicking on pictures and highlighted links


AlumaliteUSA

While browsing the net I came across the AlumailteUSA line of muzzle brakes. The .308 model is pretty interesting looking. If anyone has experience with these please drop me a line.

DPMS 308 Muzzle Brake

AlumaliteUSA Flash Hiders and Muzzle Brakes


SMITH ENTERPRISE .308 VORTEX FLASH HIDER

Smith Enterprise .308 VORTEX FLASH HIDER – This is the standard by which all other flash hiders are judged. Four, specially angled flutes hide nearly 100% muzzle flash, even during full-auto fire, by dissipating gas and retaining un-burned powder for increased residual burn. Constructed of the same 8620 bar stock steel used in the manufacture of AR-15/M16 bolts and carriers, then heat-treated to provide a high-strength core and tough, outer shell. Special, helix design helps align exiting barrel gas to improve accuracy with all bullet types. Streamlined unit reduces muzzle flash with four, 15° helical flutes. Provides Vortex technology for an AR-10.

SPECS: 8620 steel. Parkerized, black, matte finish. 5⁄8″-24 tpi. 2-11⁄16″ (6.8cm) long, .905″ (2.3cm) dia. 3.9 oz. (112g) weight. Fits Rem 700 Tactical and AR-10 in .308 Win.

Smith Enterprise .308 VORTEX FLASH HIDER

Smith Enterprise .308 VORTEX FLASH HIDER


VLTOR VC-301

VLTOR VC-301 – Highly-efficient internal helical design uses ten precisely contoured longitudinal ports combined with a unique, cloverleaf-shaped exit port to trap unburned powder particles long enough for full burn and dissipation of hot combustion gasses. Muzzle flash cancels itself out to minimize shooter exposure during daytime and low-light situations. Also serves as a compensator by directing venting gasses to help reduce muzzle jump and improve shooter control for better shot placement. Precision machined from 4140 steel to stand up to rough tactical operations. 2-1/8″ overall length brings a 14½” barrel up to legal length for civilian use when flash suppressor is permanently pinned or welded in place. Accepts most sound suppressors and Blank Firing Attachments designed to fit a M16/M4 flash hider. VC-1 fits .223/5.56mm AR-15/M16/M4 rifles; VC-301 fits .308/7.62mm AR-style rifles.

VLTOR VC-301

VLTOR VC-301


YANKEE HILL MACHINE .308 PHANTOM 5C1 COMP/FLASH HIDER

Yankee Hill Machine .308 PHANTOM 5C1 COMP/FLASH HIDER – Flat, non-serrated muzzle face helps prevent catching or snagging muzzle tip during storage or deployment. Five, longitudinal vents help hide flash while dispersing gases up and outward; tames muzzle rise and keeps your front sights on target. Outward facing ports and solid panel on bottom help eliminate dust signature when shooting in the prone position. For threaded barrels only, includes crush washer. .223 model has grooved, base rings that accept training attachments and sound suppression devices for LE and military personnel.

SPECS: Steel, mil-spec phosphate coating. .223 – ½”- 28 tpi. 2¼” (5.7cm) long, 7⁄8″ (2.2cm) diameter. 2.1 oz. (60 g) wt. .308 – 5⁄8″-24 tpi. 215⁄16″ (7.5cm) long. 1″ (2.5cm) diameter. 4.5 oz. (127g) wt.

Yankee Hill Machine PHANTOM 5C1 COMP/FLASH HIDER

Yankee Hill Machine PHANTOM 5C1 COMP/FLASH HIDER


YANKEE HILL MACHINE .308 Phantom 5C2 Comp/Flash Suppressor

Yankee Hill Machine .308 Phantom 5C2 Comp/Flash Suppressor – Five, straight, longitudinal vents hide flash while dispersing gases up and outward to tame muzzle rise. No downward facing port helps eliminate dust signature when shooting in the prone position. For threaded barrels only, includes crush washer. .223 model has grooved base rings that accept training attachments and sound suppression devices for LE and military personnel. Chisel-shaped front notches keep muzzle planted on your attacker during CQB situations.

SPECS: Steel, mil-spec phosphate coating. .223 – ½”-28 tpi. 2¼” (5.7cm) long, 7⁄8″ (2.2cm) diameter. 2.1 oz. (60 g) wt. .308 – 5⁄8″-24 tpi. 2-15⁄16″ (7.5cm) long. 1″ (2.5cm) diameter. 4.5 oz. (127g) wt.

Yankee Hill Machine .308 Phantom 5C2 Comp/Flash Suppressor

Yankee Hill Machine .308 Phantom 5C2 Comp/Flash Suppressor


BROWNELLS .308 TACTICAL FLASH SUPPRESSOR

Brownells .308 TACTICAL FLASH SUPPRESSOR – Low-profile, screw-on flash suppressor meets the needs of the most demanding tactical and competition shooters. Developed by Brownells’ in-house engineering team with plenty of input from the many dedicated shooters on our staff to give you a powerful flash suppressor that also helps reduce muzzle rise. Disperses combustion gases through five longitudinal vents to reduce the blinding, football-sized fireball of an unsuppressed rifle to a low-intensity golf ball sized burst. Greatly lowers the chance of muzzle flash giving away the operator’s position day or night, and helps preserve night vision. Vent walls are cut at an angle for maximum surface area to help cool gas and redirect it to counteract muzzle rise for fast follow-up shots. Solid underside prevents dust signature that can obscure the shooter’s view of the target or give away his position when shooting prone. Separate models available for rifles chambered in .223/5.56mm, .308/7.62mm, and 9mm. Unique “posthole digger” muzzle has cuts that form four chisel-points to provide a backup pain compliance weapon for hand-to-hand combat without creating unusually sharp projections that snag on other objects or cause unintentional injury during routine weapon handling. Precision machined from solid 4140 carbon steel bar stock and hardened to Rc 38-42 to resist blast erosion. Long-wearing, matte black oxide finish matches many factory barrel finishes.

SPECS: 4140 steel, black oxide finish, matte black. .223 – 23⁄8″ (6cm) long, .859″ (2.2cm) O.D. 3.3 oz. (94g) weight. ½”-28 tpi RH thread. Fits .223/5.56 NATO AR-15-type rifles and carbines. .308 – 2½” (6.3cm) long, .903″ (23mm) O.D. 3.3 oz. (94g) weight. 5⁄8″-24 tpi RH thread. Fits AR-style rifles chambered in .308/7.62mm

Brownells .308 TACTICAL FLASH SUPPRESSOR

Brownells .308 TACTICAL FLASH SUPPRESSOR


PRIMARY WEAPONS FSC30 DNTC308

Primary Weapons FSC30 DNTC308 – Aggressive, scallop-type cuts deliver superior gas dispersion to help stabilize the muzzle during periods of sustained fire. Special internal blast chamber with side-facing ports help reduce recoil with no adverse effect on gas system function. FSC556 is a .223 (5.56 NATO) compensator that also combines the full functionality of a flash hider. FSC30 provides the same muzzle-jump reduction and flash suppression as the FSC556 for rifles chambered in calibers from 6.8mm up to .308 (7.62 NATO). Threaded to fit muzzles with 5/8″ x 24 tpi thread, and includes a screw-on adapter that allows installation on rifles with ½” x 28 thread. DNTC308 functions only as a compensator to tame recoil on larger caliber AR-style .308 rifles. All models include washer for precise indexing of the side ports. Wrench flats directly over the internal threads help ensure easy installation.

SPECS: Steel, black, matte finish. Includes washer. FSC556 – For .223 (5.56 NATO). 2-1/8″ (5.4cm) long x 7/8″ (2.2 cm) diameter. 2.2 oz. (62.4g) wt. ½”-28 tpi RH thread. FSC30 – Fits AR-style rifles in 6.8, .270, and .308. 2¾” (7cm) long x .960″ (2.4cm) diameter. 3.6 oz. (101g) weight. 5/8″-24 tpi RH thread. Includes ½” x 28 adapter. DNTC308 – For AR-Style .308. 2½” (6.4cm) long x 7/8″ diameter. 2 oz. (57g) wt. 5/8″-24 tpi RH thread.

Primary Weapons FSC30

Primary Weapons FSC30


JP Enterprises .308 RECOIL ELIMINATOR FOR AR-10 TYPE RIFLES

JP Enterprises .308 RECOIL ELIMINATOR – Experience quick sight recovery after every round with the outstanding performance of the JP .308 Recoil Eliminator. This amazing accessory lets greatly reduces recoil in AR-10 type rifles and is ideal for all shooting scenarios across the spectrum. It has been reviewed by professionals as nothing short of amazing. The .750 outside diameter is designed for standard military contour barrels, but can be tapered down for smaller contours.

JP Muzzle Brake

JP Muzzle Brake


AR-15/M16/AR-STYLE .308 BENNY HILL “ROLLING THUNDER” COMPENSATOR

BENNY HILL “ROLLING THUNDER” COMPENSATOR – Heavy duty compensator designed by noted custom gunsmith and 3-gun competitor Benny Hill employs a unique internal expansion chamber that redirects some of the combustion gas out a topside gas port to virtually eliminate muzzle climb. The sights stay on the target, so you can make exceptionally fast follow up shots. Precision machined from a solid billet of high-grade stainless steel, with large side ports that vent more gas to help reduce felt recoil. Solid bottom prevents dust signature when shooting close to the ground. Perfect for USPSA and 3-gun competition where seconds count, and for varmint hunters who want the sight to stay the target when they take a shot. Models available for rifles chambered in .223 and .308.

SPECS: Stainless steel, natural finish. .223 fits AR-15 chambered in .223/5.56 with ½”-28 tpi muzzle threads. .308 fits AR-style rifle chambered in .308/7.62 with 5⁄8″-24 tpi muzzle threads

AR-STYLE .308 BENNY HILL "ROLLING THUNDER" COMPENSATOR

AR-STYLE .308 BENNY HILL “ROLLING THUNDER” COMPENSATOR


EGW SPACE COMP

EGW SPACE COMP – Machined steel compensator has four equally spaced vents on each side that redirect combustion gases upward and to the sides for a significant reduction in felt recoil. Helps you keep the muzzle down and the sights on the target for faster follow-up shots and smaller groups. Solid bottom prevents kicking up ground debris when shooting prone, while solid top keeps muzzle flash and venting gas from obstructing your view of target. Models available to fit rifles chambered in .223/5.56mm, .308/7.62mm, and 9mm. Precision machined from carbon steel bar stock, with a hard, matte black Parkerized finish that resists heat, scratches, and abrasion. Legal for USPSA Limited Division competition.

SPECS: Carbon steel, Parkerized, matte black finish. 2″ (5.1cm) long, .990″ (2.5cm) O.D. 3.4 oz. (96.4g) weight. .223/5.56mm – ½”-28 thread. .308/7.62mm – 5/8″-24 thread. 9mm – ½”-36 thread. Gunsmith installation recommended.

EGW SPACE COMP

EGW SPACE COMP


R3E2C MUZZLE BRAKE

R3E2C MUZZLE BRAKE – Single, large expansion chamber with forward baffle, traps and redirects muzzle gases to greatly reduce muzzle rise and blast. Dust printing and muzzle rise are all but eliminated. Stainless steel construction for superior resistance to powder corrosion. For all calibers center hole is .030″ over bullet diameter. May be gunsmith enlarged to larger diameter. Available with .575″-40 tpi; allows installation on smaller diameter, slim-tapered barrels that require a shallow thread depth to maintain maximum bore to O.D. wall thickness. Exclusive supplier to elite U.S. military forces.

SPECS: 304 stainless steel, polished finish. 2.6″ (6.8cm) long. .866″ (22mm) and .970″ (2.5cm) diameter. .30 Cal. 5/8″-24 tpi .866″ O.D. Muzzle hole can be enlarged for other calibers

R3E2C MUZZLE BRAKE

R3E2C MUZZLE BRAKE


.308 TALON BRAKE

.308 TALON BRAKE – Hardened steel muzzle brake vents gas up and to the sides through nine ports to counteract recoil and keep you on target even in full auto fire. Distinctive “claws” at muzzle give your rifle an aggressive appearance, but won’t cut bare skin unless intentional force is applied, making the Talon an excellent CQB backup device. Precision machined from pre-hardened chrome-moly steel, and available in-the-white, Parkerized, to match the factory finish on most barrels, or natural-finish stainless steel. Chrome-moly brake available with Parkerized finish to match the factory finish on most barrel, or with Lava Shield, an extremely hard, chemical- and corrosion-resistant ceramic coating.

.308 TALON BRAKE

.308 TALON BRAKE


Primary Weapons AR 308 .308 Shim Set

Primary Weapons AR 308 .308 Shim Set – Hardened steel shims ensure precise fit and correct alignment of flash suppressors, muzzle brakes, and compensators. Large (thick) shim allows 90° of rotation and can be used as a spacer for barrels not having a relief cut behind the threads. Medium shims add approximately 45° of rotation. Small shims used with large and medium shims provide smaller degrees of rotation for finely-tuned, critical alignment.

PRIMARY WEAPONS - AR-15/M16/AR-STYLE .308 MUZZLE DEVICE ALIGNMENT SHIMS

PRIMARY WEAPONS – AR-15/M16/AR-STYLE .308 MUZZLE DEVICE ALIGNMENT SHIMS


308AR 5/8″-24 Thread Protector

308 AR 5/8″-24 Thread Protector – Sure its not a muzzle device but it sure is handy to protect those muzzle threads for those times when your without a muzzle attachment.

308AR 5/8"-24 Thread Protector

308AR 5/8″-24 Thread Protector

 

308 AR  AR 10 Flash Hiders and Muzzle Brakes

 

Save

Magpul 25 Round 308 PMAGS, 308 AR PMAGS For Sale Cheap, AR308 Magazines

Save

Save

Save

Save

Save

308 AR Barrels for Semi Automatic Rifles

308 AR Barrels

 


Criterion Barrels Inc

Criterion Barrels 308AR Barrel

Criterion Barrels 308 AR Barrel

 

308 AR Barrels – .308 AR match grade barrels are designed for DPMS, Remington, Bushmaster, and FA pattern rifles. These barrels feature a barrel extension and hybrid match chamber compatible with both 7.62×51 NATO and .308 Win. Offered in a variety of contours, these barrels are manufactured from 410 Stainless Steel or Chrome Moly (Ultralight only). Visit Criterion Barrels Inc

Model Number Length Gas System Chamber Twist Finish
STAINLESS STEEL
1016S-HYM 16″ Mid-Length .308 M118 LR 1-10 Stainless
1016S-HYM-N 16″ Mid-Length .308 M118 LR 1-10 Nitride
1016S-HYR 16″ Rifle Length .308 M118 LR 1-10 Stainless
1018S-HYM 18″ Mid-Length .308 M118 LR 1-10 Stainless
1018S-HYM-N 18″ Mid-Length .308 M118 LR 1-10 Nitride
10185-HYR 18″ Rifle Length .308 M118 LR 1-10 Stainless
10185-HYR-N 18″ Rifle Length .308 M118 LR 1-10 Nitride
1020S-HYR 20″ Rifle Length .308 M118 LR 1-11 Stainless
1020S-HYR-N 20″ Rifle Length .308 M118 LR 1-11 Nitride
1022S-HYR 22″ Rifle Length .308 M118 LR 1-11 Stainless
1022S-HYR-N 22″ Rifle Length .308 M118 LR 1-11 Nitride
CHROME MOLY/CHROME LINED
10160-HYM 16″ Mid-Length .308 M118 LR 1-10 Parkerized
10180-HYR 18″ Rifle Length .308 M118 LR 1-10 Parkerized
10180-HYM 18″ Mid-Length .308 M118 LR 1-10 Parkerized
10200-HYR 20″ Rifle Length .308 M118 LR 1-10 Parkerized

 

Item Number Length Twist Contour Muzzle Gas Block Chamber
FA-TU-003 18.5″ 1-10 RH Medium Plain or 5/8 x 24 (.800) .936 .308 Hybrid Match
FA-TU-005 20″ 1-10 RH M110 5/8 x 24 (.850) .875 .308 Hybrid Match
FA-TU-061 24″ 1-10 RH Heavy Plain or 5/8 x 24 (.875) .936 .308 Hybrid Match
FA-TU-010 24″ 1-8 RH Heavy Plain or 5/8 x 24 (.875) .936 6.5 Creedmoor

Christensen Arms 308 AR Barrels

Christensen Arms CA-10 308AR AR10 Barrel

Christensen Arms CA-10 308AR AR10 Barrel

 

Designed using precision engineering adopted from the aerospace industry, Christensen Arms carbon-fiber barrels are crafted using a proprietary layered design that offers any marksman superior accuracy and performance. The barrel lining is made from match-grade 416R stainless steel and is measured to a tolerance of +/- .0001. When it comes to accuracy, Christensen Arms carbon-fiber barrels have preformance you can trust. Includes gas block and gas tube. Now a catalog item at Brownells.


CMMG


DPMS


Fulton Armory 308 AR Barrels

Fulton Armory Titan 308 Semi Automatic Rifles use barrels manufactured by Criterion Barrels Inc (See Above)


Armalite AR-10 Barrels

I am only aware of Armalite manufacturing AR-10 barrels


NEMO ARMS NITRIDE COATED BARRELS

NEMO 308AR BARREL

Nemo Arms Nitride Coated 308 AR Barrel

I have no information on these 308AR BARRELS beyond what is listed on the NEMO product page.

SPECIFICATIONS

  • Black Nitride Coating, offers superior corrosion resistance and accuracy
  • 300 Blackout barrel has an M4 profile and is chrome moly steel
  • 308 Winchester chambered barrels feature a HBAR profile
  • 308 Winchester barrels are machined from 416 stainless steel
  • 5/8-24 muzzle threads
  • .750” O.D. at the gas port
  • 16” barrels feature a carbine length gas system
  • 18” and 20” barrels feature a rifle length gas system
  • 300 Blackout barrel fits AR15/M16 receivers
  • 308 Winchester barrels fit DPMS pattern 308 AR rifles
  • Barrel extensions feature M4 feed ramps
  • 308 Barrels have a 1-10 twist
  • 300 Blackout barrel has a 1-8 twist
  • Black nitride coating, stainless steel (308) and chrome moly (300BLK). Length – 16”, 18” and 20”. .750” at gas port. M4 feed ramps. 5/8-24 muzzle threads. 1-8 Twist (300BLK) and 1-10 Twist (308).

JP Rifles


McGowen Precision Barrels


POF


Ballistic Advantage 308 AR Barrels

Ballistic Advantage is well known among the 6.8 crowd for their precision match 6.8 barrels. They also offer match grade barrels in other calibers including .308 Winchester

Ballistic Advantage .308 AR Barrel

Ballistic Advantage .308 AR Barrel


Krieger Barrels

Krieger Barrels are among the best if not the best rifle barrels period. Below is info directly from their web site

Did you know that as of 2009, the U.S. Rifle, Cal 7.62mm M-110 and it’s civilian clones (Armalite AR-10, DPMS-LR-308 etc.) are legal to use in NRA Service Rifle competition? We are now offering Service Rifle legal barrels for the DPMS and Armalite style rifles. Please refer to the 2009 NRA High Power rule book, rule # 3.1.6 Service Rifle – U.S. Rifle, Caliber 7.62mm M-110 Series for the rule details on this rifle and it’s legal configurations. Barrel specifications of what we are making are below. As with our AR-15 DCM/Service Rifle barrels, we do not include a gas block or front sight with this barrel.

These barrels have a retail cost of $375.00 and are un-chambered and not crowned for that cost.

  • Stainless Steel
  • .30 caliber, 4 groove (.300″ bore, .308″ groove)
  • Precision ground for a .875″ diameter gas block/front sight
  • .850″ Muzzle diameter
  • Weight: 4#
  • Machined to A.M.U. contour to be service rifle legal
  • 20″ finish length only
  • 1-10, 1-11, 1-12 twist rates

Our current AR-10/DPMS service prices will remain the same for these barrels. Examples of these service prices are below.

  • $100.00     Finish chamber in .308 Win and headspace to customer supplied bolt and crown muzzle
  • $240.00     Chamber and assemble to customer supplied upper receiver
  • $ 25.00     Satin Bead Blast finish on barrel
  • $ 65.00     Thread muzzle for ‘un-timed’ flash suppressor (see NRA rule book and your States own laws for the legality of this)

Noveske Rifleworks


Accuracy Systems


308 AR Charging Handles

  1. Home
  2. Parts

308 AR Charging Handle Option and Upgrades. DPMS 308, DPMS GII and Armalite AR-10 Compatible

308 AR Charging Handle


BCM Gunfighter Charging Handle 308 AR

BCM 308 Gunfighter Charging Handle 308 AR | 308 AR Charging Handle

BCM Gunfighter Charging Handle | 308 AR Charging Handle

When the AR15 system was first introduced to and fielded by the US Military in the 1960s, the manual of arms for an infantryman was significantly different than what currently exists today.  To charge the rifle the shooter released their hand from a firing grip, grabbed each side of the charging handle with the thumb and forefinger or the first two fingers, (while applying pressure to the latch) pulled the charging handle all the way to the rear, and then released it to charge the weapon.

Like everything else in the last 45 years, tactics and weaponry have undergone a continuous evolution.  Red dot optics get the shooter on target quicker, shorter barrels allow the operator to more quickly negotiate tighter urban areas, and operator’s manipulations of the weapon system have become much more efficient and faster.  The current manual of arms has the operator maintaining a firing grip almost continuously while manipulating the weapon with the non-dominant hand in an effort to more quickly get the weapon ready to fire.  With that premise, most weapon manipulations are done only with the shooter’s support hand; to include operating the charging handle.

In order to perform an immediate action or charge the carbine, current CQB techniques have the operator racking the charging handle to the rear using their support side hand only.  This is done in one swift and strong movement.  With the operator’s firing grip maintained, the weapon again has a loaded chamber, and the shooter can immediately bring a hot weapon back into the fight.

The current use of extended tactical latches has made this movement much more efficient.  The only drawback to this type of manipulation is all the force used to rack the charging handle rearward goes into the extended tactical latch and is then transferred into the roll pin.  With this scenario, the entire operation becomes contingent on the sheer strength of this tiny 1/16” roll pin, and its ability to take continuing blows.  Repeated and forceful support hand only racking of the charging handle eventually can lead to breaking the roll pin and loosing the latch completely.  With the latch blown out, the charging handle will not stay secured to the receiver as the bolt is moving back and forth during each cycle of the weapon’s action.  Not a good situation on a two way range.

The BCMGUNFIGHTER Charging Handle and extended latches feature internal redesigns to direct the force off of the roll pin and into the body of the charging handle during support hand only manipulations.  This new design has a built in backstop engineered into the extended latch and into the charging handle.  As the latch is opened up, its’ travel is limited by these flat surface backstops.  With this travel limiting feature, the stress is taken off the roll pin, and is now redirected into the entire body of the charging handle.

The BCMGUNFIGHTER™ Charging Handle offers two significant advantages.

  • Since the tiny roll pin is no longer the weak point – it is a much stronger system and tactical latch will stay intact even under repeated support side only manipulation
  • With the force kept inside the body of the handle, when the handle is pulled directly to the rear, it moves directly to the rear and does not angle off to the outboard side.  A much smoother operation.

Mecharmor Defense Systems TacOps-1 Charging Handle

308 AR Charging Handle – Ambidextrous tactical charging handle can be operated with minimal body movement in confined spaces, under concealment, or even in the prone position. Lets you to maintain constant visual contact with the target during magazine changes, jam clearances, and other high-stress CQB situations. Extended, ergonomically shaped grasping surface provides an extra-secure grasp and extra leverage for normal charging operation, yet won’t interfere with the forward assist or oversized optics that extend behind the rear of the receiver. Dual-mode latch mechanism has a second release button in the center rear of the handle for easy handle operation with the support hand, further increasing your operational versatility. The heavy-duty latch roll pin resists breakage under hard use, and the 7-pound stainless steel latch spring ensures the latch locks down tight—and stays locked—until you release it.

SPECS: 7075 T6 aluminum, hardcoat anodized, Teflon coated, black. .223/5.56 fits AR-15/M16/M4. .308 fits AR-Style .308 rifles

The MechArmor TacOps-1 ambidextrous charging handle is the only product of its type to be awarded the National Tactical Officers Associations coveted GOLD Seal of Testing & Recommendation award after rigorous field testing.”

Mecharmor Defense Systems TachOps-1 | 308 AR Charging Handle

Mecharmor Defense Systems TachOps-1 | 308 AR Charging Handle

Save

Save

Save

Save

Save

Save

Save

Save

308 AR Bolt Carrier AR 308 AR-10

308 AR Bolt Carrier


August 2016 – As I update this “308 AR Bolt Carrier” webpage I am a little overwhelmed by the sheer volume of companies offering 308 bolt carrier groups. I would caution anyone about using no-name, inexpensive generic BCG’s.

This page only applies to standard gas operated .308 AR type rifles. Piston driven AR’s will be covered elsewhere.

Dimensionally Armalite and DPMS bolt carriers groups are nearly identical to within a few thousandth’s of an inch of each other. This means they are interchangeable. However the one thing to keep in mind is you cant interchange the bolts between the different brands of bolt carrier. This means only use an Armalite bolt in an Armalite bolt carrier and a DPMS bolt in a DPMS bolt carrier.


Aero Precision M5 Bolt Carrier Group


Brownells AR 308 Bolt Carrier Group


Prime Weaponry 308 AR Bolt Carrier Group


CMMG 308 AR Bolt Carrier Group


DPMS 308 AR Bolt Carrier

DPMS offers two variation. One with a standard mil spec finish and the other in hard chrome. DPMS also sells the individual components so you can build a bolt carrier group from the ground up. They also offer a hard chrome bolt that can be utilized with either of their bolt carrier offerings as well as the Fulton Armory and JP Rifles bolt carriers.

308-Bolt-Carrier-and-Bolt-Assembly-DPMS-308-BCA

DPMS 308 AR Bolt Carrier


Fulton Armory 308 AR Bolt Carrier

Fulton Armory offers two versions of their bolt carrier. The first is a standard DPMS LR-308 type and the second is a modified version that features a side cocking handle installed. The side cocking model is only to be used with an upper receiver milled to function with the side cocking handle. Using the side cocking model in a standard upper will damage you and your rifle.

Fulton Armory 308 AR Bolt Carrier Exploded View

Fulton Armory 308 AR Bolt Carrier Exploded View

Fulton Armory Side Cocking Bolt Carrier Group

Fulton Armory Side Cocking Bolt Carrier Group


SI Defense 308 AR Bolt Carrier – SI DEFENSE is now FALKOR DEFENSE

Not to much information on these bolt carriers other then they aren’t available for purchase yet as they are still in their testing phase at SI Defense.


Armalite AR-10 Bolt Carrier

To the best of my knowledge Armalite offers one mil spec bolt carrier group and from all reports its made very well.

ArmaLite AR-10 Complete Bolt Carrier Group

ArmaLite AR-10 Complete Bolt Carrier Group


JP Rifles JPBC-4 308 AR Bolt Carrier

JP Rifles offers a mostly stripped bolt carrier. The JP LMOS Bolt Carrier and Key is a low mass bolt carrier finished in black QPQ hard coat. It increases longevity and lends a naturally smooth surface. This bolt carrier must be used with an LR-308 bolt assembly, firing pin, cam pin and firing pin retainer.

JP Enterprises LMOS Bolt Carrier and Key AR-10, DPMS LR-308

JP Enterprises LMOS Bolt Carrier and Key AR-10, DPMS LR-308


Fail Zero EXO Coated .308 Bolt Carrier Group

We really want to like the Fail Zero product but they review poorly across the web.

This Bolt Carrier Group (BCG) comes fully assembled and ready to drop into most mil spec AR10 upper receivers. All critcal parts are coated with EXO Nickel Boron technology that provides permanents dry lubricity, extreme durability, increase wear and corrosion resistance. Our patented Nickel Boron coating will reduce friction and improve the overall performance of your rifle. Nickel Boron treated parts include: Bolt & Extractor (.308 compatible), Bolt Carrier, Extractor, Cam Pin, Carrier Key, Firing Pin

Brand -Fail Zero, Caliber / Gauge – .308 Win, Platform – DPMS, Bolt Finish – Nickel Boron, Bolt Material – 9310 Steel, Carrier Finish – Nickel Boron, Carrier, Material – 8620 Steel, Magnetic Particle Inspection – Yes, High Pressure Tested – Yes


Young Manufacturing 308 Chrome Bolt Carrier Complete – YM-308NFA

Like their signature 5.56mm carrier the .308  (308 AR) version has added surface area in the front of the carrier gives a tighter fit when the bolt is in battery for more consistent lock up. We heat treat, precision grind and hard chrome plate all of our carriers and bolts. The carrier is made from 8620. The bolt is made from 9310. Compatible with the DPMS style rifles that take the P-Mag. Weight 18 ounces for complete assembly.


LANTAC E-BCG .308/7.62X51MM Enhanced Full Auto Style Bolt Carrier Group NiB Coated

AR10 Full Auto Style for increased mass and lock time. Our new 308 BCG is precision machined from 8620 Steel with a 9310 Precision Hard Ground, Magnetically Particle Inspected Bolt. The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings. This offers extreme lubricity with a friction coefficient of .02 and surface hardness of 82-85 Rockwell C.
The carriers patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier. This results in a system that runs flatter with a smoother energy pulse.

LANTAC E-BCG

In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.

The flared boss at the tail of the carrier enhances the 308 BCG’s position within the buffer tube at the time of cycling and allows for a flatter more controlled reciprocation of the assembly. All critical dimensions are hard turned / ground after heat treat. All E-BCG’s feature the LANTAC CP-R360-H™ patent pending domed cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).

The ultra smooth head reduces wear within the upper receiver. The BCG’s weight helps to increase lock time with smoother operation. Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly. The E-BCG’s forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors. However, it should be noted that the E-BCG™ is not a complete solution for this issue and all rifles are different. ‘Over Gassed’ guns will suffer to a larger extent from this problem.

  • Weight 1Lb 2.1oz
  • Forward Porting, Enlarged Vents.
  • Balanced flared boss.
  • 8620 Carrier, Heat Treated, Hard Turned.
  • MPI 9310 Bolt, Hard Turned / Ground.
  • NiB UCT EXO Coating.
  • CP-R360-H Domed Cam Pin
  • Mil-Spec Gas Rings
  • Mil-Spec Staked Gas Key
  • Grade 8 Hardened Fasteners
  • All Hard Chrome surfaces are to MIL-STD-171 1.2.2.2
  • Lifetime Warranty.
  • Made in the USA.

Anderson Manufacturing 308 Bolt Carrier Group

The Anderson Manufacturing AR-308 M16 Bolt Carrier Group is manufactured 100% to military specifications. With a chrome lined, 8620 carpenter steel carrier, 9310 Super Alloy Steel bolt, and properly staked gas key, this full-shroud carrier group is perfect for you next .308 build.

Brand – Anderson Manufacturing, Caliber – .308 Win, Carrier Style – M16 / Full-Auto, Platform – AR-308 – DPMS, Bolt Finish – Phosphate, Bolt Material – 9310 Steel, Carrier Finish – Phosphate, Carrier Material – 8620 Steel, Extractor – O-Ring, Gas Key – Staked, Magnetic Particle Inspection – Yes, High Pressure Tested – No, Weight – 0.72 lbs.


WMD 308 AR NiB-X Bolt Carrier Group – Polished – DPMS Pattern NiBXBCG308

WMD NiB-X AR-308 Bolt Carrier Group provides long life and easy cleaning in the harshest of environments. DPMS pattern.
Brand – WMD Guns, Caliber -.308 Win, Carrier Style -M16 / Full-Auto, Platform – AR-308 – DPMS, Bolt Finish – NiB-X Polished, Carrier Finish – NiB-X Polished, Extractor – O-Ring, Gas Key -Staked, Magnetic Particle Inspection – Yes, High Pressure Tested – No

Black Rain Ordnance Nickel Boron Bolt Carrier Group 308 AR – DPMS Pattern BRO-BCG-308

Built to the same exacting standards as their standard AR-15 bolt carrier group, the Black Rain Ordnance nickel boron 308 AR Bolt Carrier Group for .308s provides highly reliability and smooth cycling with reduced maintenance.
Brand -Black Rain Ordnance, Caliber -.308 Win, Carrier Style -M16 / Full-Auto, Platform – AR-308 – DPMS, Bolt Finish – Nickel Boron, Carrier Finish – Nickel Boron, Gas Key -Staked

P.O.F. Ultimate Bolt Carrier Group 308 AR NP3 Finish

Patriot Ordnance Factory P-308 Bolt Carrier

P.O.F. Ultimate Bolt Carrier Group 308 AR

ipsum

F-1 Firearms 7.62 DuraBolt Direct Impingement Full Auto rated AR10 Bolt Carrier Group BCG-GOLD

F-1 Firearms DuraBolt Gold direct impingement full auto rated AR10 bolt carrier group is compatible with DPMS spec large frame receiver sets and associated components. The DuraBolt Gold is enhanced with a Physical Vapor Deposition (PVD) TiN coating, which gives it an extremely durable and corrosion resistant gold mirror finish. The Durabolt Gold’s coating also offers excellent lubricity with a 0.45 coefficient of friction.

  • Carpenter 158 bolt, ground after heat treat, MPI and HPT
  • 9310 steel carrier, ground after heat treat
  • Weight-1.12lbs

 


Complete Bolt Carrier Group for 308 AR, DPMS pattern rifles. This complete bolt carrier group includes a complete bolt, properly staked gas key, firing pin, cam pin and firing pin retaining pin. Bolt is precision machined from 9310 steel, and the carrier from 8620. Hardened extractor is S7 tool steel. The complete bolt head features a Melonite finish for added durability and resistance to wear, the carrier has a Nickel Boron finish to ensure the smoothest possible action. Coated by WMD Firearms. Brand -Radical Firearms, Caliber -.308/7.62×51,Carrier Style – M16 / Full-Auto, Platform -AR-308 – DPMS ,Bolt Finish -Nickel Boron, Bolt Material -9310 Steel, Carrier Finish -Nickel Boron, Carrier Material -8620 Steel, Extractor -O-Ring, Gas Key – Staked, Magnetic Particle Inspection – Yes, High Pressure Tested – No


ADK Arms – 308/7.62 Bolt Carrier Group with Forward Assist Serrations, Nitride

ADK Arms tried and true 308/7.62 bolt carrier group is engineered and designed to the highest tolerances and military specifications and beyond. Our superior nitride QPQ finish ensures long term durability and lubrication.

ADK Arms is a facility providing state of the art, high end AR-15 and AR-10 Components to the gun industry. We provide service to sell products, manufacture to unique specifications, and redesign to your requirements. ADK Arms is your one stop source for standard and custom gun parts.

With over 30 years experience in the government arms manufacturing field we have the knowledge and resources to provide exceptional quality products. Parts are manufactured in the USA to the highest tolerances to ensure accuracy and smooth functionality. All parts are inspected to MIL-I-45208 which means if we were to find 1 defective part then every part would be suspect. Our quality and inspection practices are at the same level as what our Men and Women in uniform use in operations.

All components of our bolt carrier groups are manufactured in house to strict tolerances. We are a DOD government contractor with a state of the art CNC machine shop and inspection facility. ADK Arms BCG’s are sold to you direct from our facility.


Rainier Arms Ultramatch .308 BCG NIB

Match style DPMS Pattern Bolt Carrier Assembly designed to work with DPMS style barrel extension and compatible upper receivers. Always check compatibility prior to use in any firearm.

Carrier Specifications:

  • Full Auto Carrier
  • SAE 8620
  • Heat Treated
  • Shot Peened
  • Nickel Boron Finish
  • Bolt:9310 Steel
  • Shot Peened
  • Heat Treated
  • Nickel Boron Plated
  • Extractor:S7 Tool Steel
  • Precision Machined
  • Shot Peened
  • Heat Treated

Extractor Components: Extractor Spring made of Music Wire (The best spring steel available) “Reliability post” exceeds MIL-SPEC. Made with OUR OWN multi-cavity mold with the highest grade of chemical and heat resistant rubber, VITON. Our Reliability posts are NOT commercially available. VITON Rubber “Full-Auto O Ring” made if you want the highest grade of chemical and heat resistant rubber.

  • Extractor Retaining Pin:
  • Precision Machined 4140
  • Heat Treated
  • Precision ground to diameter
  • Firing Pin:Colt Full Auto Spec
  • Machined 4140
  • Heat Treated

ALPHA Nitride 308 Bolt Carrier Group

ALPHA Nitride 308 Bolt Carrier Group Complete M16 bolt carrier group assembly. All the major components have been QPQ Nitride treated (Carrier, Bolt, Extractor and gas key). Slicker and harder surface with 70 RC hardness. MPI tested and marked, shot peened 9310 steel bolt. 8620 Steel Carrier. Requires very little lubrication and has a very slick surface. Easier to clean. Side staked gas key with grade 8 fasteners.


Davidsons Defense Omega Manufacturing .308 AR LR-308 Bolt Carrier Group – Black Nitride Finish

Note – The description below is from the vendor. It was the worst written product descriptions I have ever read. I cleaned it a little but did not perform a rewrite.

The Davidson Defense Nib bolt carrier group is one of the finest available on the market for bolt carrier groups with a finish that is unmatched by WMD.
Each Bolt Carrier Group go’s through a rigorous process of Rockwell testing Mpi and Hpt Testing Then after that the bolt is sent to Wmd to apply one of the best finishes on the market smooth and unfailing making this the ultimate in Lr-308 bolt carrier groups and for a cost that is much less than comparable bolt groups of the same caliber.

Features full length forward Assist Cuts where this bolt group is designed to be above mil spec in every way. It is finish in the tough and long wearing Nickel Boron, superior for its wear and ease of cleaning. This bcg fits the lr-308 dpms pattern guns only Most guns are patterned after the dpms Lr-308 Design Most AR-308 rifles are Lr-308 format Rifles Only the Armalite is not. So this part will fit almost all .308 platform guns.

NOTE: This will not fit the Armalite AR-10


KAK LR-308 BCG DOUBLE EJECTOR (BOLT CARRIER GROUP) MPI

KAK INDUSTRY LR-308 COMPLETE BOLT CARRIER GROUP

  • DOUBLE EJECTORS
  • MPI TESTED AND MARKED
  • NITRIDE FINISH INSIDE AND OUTSIDE
  • WITH FORWARD ASSIST CUTS
  • CORRECT AUTO SEAR TRIP LOCATION
  • 9310 HEAD
  • 8620 CARRIER
  • FOR 7.62 NATO, .308 WINCHESTER OR SIMILAR
  • INCLUDES O-RING EXTRACTOR HELPER TO RUN UNDER ALL CONDITIONS
  • WILL WORK WITH DPMS FORWARD ASSIST OR REAR AERO STYLE FORWARD ASSIST

308 Bolt Carrier Group


DRD Complete Bolt Carrier Group .308 DPMS Pattern Nib-X Finish 308BCGNB

If you are looking for a bolt carrier group for your DPMS style .308 rifle, then check out the DRD Complete Bolt Carrier Group .308 DPMS Pattern. This bolt carrier group is designed for DPMS style .308 rifles, and comes in a Nib-X finish.

Specifications and Features:
DRD – Complete Bolt Carrier Group, .308 DPMS Pattern, Nib-X Finish


LBE Unlimited AR-10 Complete Bolt Carrier Group Phosphate Finish Matte Black AR10BCG

LBE Unlimited was developed to answer the needs of Elite Task Force team’s world wide who demand top performing gear with no room for error. Whether you are shooting in combat, competition or practice chose the gear that will not fail under pressure, LBE Unlimited. This particular LBE Unlimited part is a must have for the modern gun builder or shooting enthusiast. Great as a spare, or perfect for your next build this complete AR-10 bolt carrier group features a bolt, carrier, and a phosphated matte black finish.

Specifications and Features:
LBE Unlimited AR10BCG
AR-10 Complete Bolt Carrier Group
Made in the USA
Matte Black

Fits:
Standard AR-10 upper receivers


 

Buy Magpul PMAG D-60

Magpul PMAG D-60

308 AR Magazines | AR308 Magazines | AR-10 MAGAZINES

  1. Home
  2. Parts

308 AR Magazines | AR308 Magazines | AR-10 MAGAZINES

308 AR MAGAZINES for AR308, AR-10 and DPMS LR-308:

Be sure to follow our 308 Magazine discussion on the 308AR.com forum


DPMS LR-308 MAGAZINES

If you want steel magazines for any DPMS/SR25 platform based weapon DPMS is your best bet. Now here’s the thing. A couple years back DPMS had a bad run of magazines and they are still out there. You can tinker with them to make them work or call DPMS and exchange them. DPMS is pretty good about it. Also keep in mind DPMS still lets out the occasional bad magazine. The prior sentences apply. If your nor sure you have a bad magazine buy a PMAG and eliminate that variable.


MAGPUL LR20 308 AR MAGAZINES -308 PMAG

The MAGPUL LR20 308 AR Magazines are simply the most reliable magazine for the DPMS/SR25 platform based weapons. If you have a DPMS that doesnt feed and function properly these magazine will eliminate a faulty magazine. I cannot attest to their durability as they are relatively new to the market.

At $20 they are a steal.


ARMALITE AR-10 MAGAZINES

To the best of my knowledge the only magazines available for the Armalite AR-10 are manufactured by Armalite. MAGPUL PMAGS do not work in the AR-10 platform.

Armalite takes some heat from the uninformed about their magazines. During the AWB Armalite switched to modified M14 magazines and initially there were some feeding issues. Today this is not an issue. The magazines and weapons function perfectly. In fact if you have an AR-10 made during the AWB period Armalite will upgrade it to the current standard for use with standard Armalite AR-10 magazines for a nominal fee.

Magazine cost was another factor detractors of the AR-10 platform would oftenbring up. Current AR-10 magazines are sold for about the same price as DPMS factory magazines.

Lastly Armalite offers 25 round magazines for the AR-10. No other 308 AR manufacturer has been able to pull that off.

Update: Armalite now also produces the original AR10 rifle that will accept Magpul magazines


DPMS LR-308 MAGAZINES

If you want steel magazines for any DPMS/SR25 platform based weapon DPMS 308AR MAGAZINES are your best bet. Now here’s the thing. A couple years back DPMS had a bad run of magazines and they are still out there. You can tinker with them to make them work or call DPMS and exchange them. DPMS is pretty good about it. Also keep in mind DPMS still lets out the occasional bad magazine. The prior sentences apply. If your nor sure you have a bad magazine buy a PMAG and eliminate that variable.


ProMag 308 AR MAGAZINES

ProMag is a newcomer to the 308 AR field. Typically ProMag makes premium magazines but to date there is little information available. If they prove reliable priced at $29 they will be a great alternative to factory DPMS 308 magazines.


Mag-Tec 308 AR MAGAZINES

I have no idea who Mag-Tec is but reviews are less than favorable at online stores. We also have a discussion over at the 308AR.com forum. At nearly $40 they cost more than DPMS factory magazines and twice as much as 308 PMAGS.


Brownells DPMS LR 308 AR Magazines

Brownells now has their own line of 308AR Magazines


X Products 308 AR Magazines

X Products is the maker of a line of drum magazines


Magpul 25 Round 308 PMAGS, 308 AR PMAGS For Sale Cheap, AR308 Magazines

Save

Save

Save

Save

Save

308 AR Magazines | AR308 Magazines | AR-10 MAGAZINES