AREA53 EL CAPITAN 308AR

AREA53 EL CAPITAN 308AR

AREA53 EL CAPITAN 308AR

 

AREA53 EL CAPITAN 308AR

AREA53 EL CAPITAN 308AR DESCRIPTION: The “El Capitan” receiver set is machined from 7075-T6 Aluminum, is extremely rigid, and features a unique control grip for the serious tactical shooter to allow maximum control of the firearm in CQB situations. The Magwell is finished with a generous funneled opening similar to our other models, accepts Magpul PMags, was designed on the DPMS Pattern and accept Mil Spec lower parts.  Comes standard with ambidextrous bolt release, ambidextrous magazine release, trigger and upper adjustment setscrews.

AREA53 EL CAPITAN 308AR SPECIFICATION:
Caliber: .308 Winchester
Barrel Length: 16.5″+ OAL (14.0″ Barrel & 2.5″ Pinned Brake) 1-10 Twist
Gas Block: Adjustable
Gas Tube: Mid Length, Stainless Steel
Muzzle Device: Fortis RED Brake, Pinned and Welded
Trigger: DPMS Mil Spec
Bolt Carrier: Nickel Boron
Stock: Minimalist 6 Position Collapsible, Mission First Tactical
Grip: G27, Mission First Tactical
Handguard & Length: 13.00 Inches, Quick Take Down “QTD”
Safety Selector: Ambidextrous Battle Arms Development
Charging Handle: Standard with Badger Ordnance Latch
Buffer Tube: 6 Position Carbine Length
Buffer Spring & Assembly: JP Polished Spring and 308 Carbine Buffer Assembly
Overall Length: 32.9 Inches
Weight: 8.95 Pounds
Colors: Burnt Bronze Cerakote (Lower, Upper & Handguard)
Finish: Type III Hardcoat Anodizing & Cerakote

AREA53 THREE PERCENTER 308AR

AREA53 THREE PERCENTER 308AR

AREA53 THREE PERCENTER 308AR

AREA53 THREE PERCENTER 308AR

AREA53 THREE PERCENTER 308AR – Large Frame 308AR Receiver, fully ambidextrous controls include ambidextrous bolt release, ambidextrous magazine release and ambidextrous safety.

A Three Percenter Rifle:  During the American Revolution, the active forces in the field against the King’s tyranny never amounted to more than 3% of the colonists. Three percenters today, for the most part, identify with this 3% because they were true patriots fighting for the freedoms the nation we love and honor was founded on. Three percenters intend to maintain their God-given natural rights to liberty and property. History itself, for good or ill, is made by determined minorities. Never underestimate the power of a small group of committed citizens to change the world. Indeed, it has never been done otherwise.
AREA53 THREE PERCENTER 308AR Specifications:

  • Caliber: .308 / 7.62
  • Barrel: FN Hammer Forged 16″ / 1/12 Twist Rate
  • Gas Block: .750 Adjustable Area53 Gas Block
  • Gas Tube: Rifle Length, Stainless Steel
  • Muzzle Device: AAC  51T Blackout Muzzle Brake
  • Trigger: DPMS Mil Spec
  • Trigger Pins: KNS Gen 2 Hammer and Trigger Anti-Rotation Pins
  • Bolt Carrier: Nickel Boron Coated
  • Bolt Catch Release: Ambidextrous Bolt Release
  • Magazine Release: Ambidextrous Magazine Release
  • Stock: Minimalist 6 Position Collapsible, Mission First Tactical (Mil)
  • Grip: G27, Mission First Tactical
  • Handguard & Length: 13.00 Inch Quick Take Down
  • Safety Selector: Ambi Battle Arms Development
  • Charging Handle: Standard with Badger Ordnance Latch
  • Overall Length: 32.9 Inches
  • Weight: 8.65 Pounds
  • Colors: Scorched Dark Earth
  • Finish: Type III Hardcoat Anodizing & Cerakote

DoubleStar DSC STAR10-B

DoubleStar DSC STAR10-B 308AR AR-10

DoubleStar DSC STAR10-B

DoubleStar DSC STAR10-B 308AR merges supreme accuracy, unfailing reliablity and blazing-fast operation. Destined to rule the range, match and hunting field, the STAR10-B™ elevates the power and precision of the AR-10 platform to a new level. Featuring a billet upper and lower receiver, ACE™ Hammer™ stock and Bullseye™ muzzle brake, this beast is a real heavy hitter.

Caliber: .308
Operating System: Direct Gas Impingement
Modes of Fire: Semi-Automatic
OAL: 41”
Weight: 9.8 lbs. (Unloaded)
Barrel Length: 18”
Barrel Type: WAG (Wilson Air Gauged)
Twist Rate: 1:11.25
Barrel Material: Stainless Steel
Other Barrel Features: Fluted, Free Floating
Sight/Gas Block: Low Profile Gas Block
Muzzle Device: Bullseye™ Muzzle Brake
Handguard: Samson Evolution (15”)
Upper Receiver Type: Flattop
Upper Receiver Material: 7075 T6 Billet
Upper Receiver Coating: Anodized to Mil-Spec
Other Upper Receiver Features: Brass Deflector & Dust Cover
Lower Receiver Material: 7075 T6 Billet
Lower Receiver Coating: Anodized to Mil-Spec
Other Lower Receiver Features: Integrated Trigger Guard,
Enhanced Magwell
Buttstock: ACE™ Hammer™ Stock
Pistol Grip: Hogue®
Other Features: BCMGUNFIGHTER™ Charging Handle w/MOD4 latch, CMC 3.5 lbs. Flat Trigger

DoubleStar DSC STAR10-B


 

Brownells Magpul 25 Round 308 PMAGS

Brownells Magpul 25 Round 308 PMAGS

AR 15 HABU MOD1 CHARGING HANDLE

AR-15 HABU MOD1 CHARGING HANDLE

AR-15 HABU MOD1 CHARGING HANDLE

I religiously check the Brownlells  new products section looking for new hardware to separate me from my money. Well today I saw the HABU MOD1 CHARGING HANDLE listed.  The HABU MOD1 CHARGING HANDLE at this time is only available for the AR-15 but I found it an interesting enough product that I thought I would post this and ask for public opinion on the 308AR FB page.

The HABU MOD1 CHARGING HANDLE was designed by veterans who saw a need for an integral M4/AR15 cheek riser. This was needed to better align the shooters eye with magnified optics with short eye reliefs. The Army and Marine Corps both issue magnified optics to their ground troops. For many years it has been impossible for most shooters to attain a proper sight picture without goose-necking, until now. The HABU™ solves this issue and will provide the solution that many asked for, yet only Falcon 37 delivered.

Why HABU MOD1 CHARGING HANDLE is a “Must Have” AR Accessory

By combining the charging handle and cheek rest HABU Mod 1 not only accelerates and improves operation of the AR platform, it looks BAD-ASS… like it belongs there! Using Major v.s. minor motor skills for it’s operation which is critical for Entry Teams, Military personnel and other high stress environments, the shooter can more effectively grip HABU to get his or her gun back in the fight.
A shooter must have consistent, proper cheek weld on any gun platform they’re shooting. The charging handle on the AR platform prevents attachment of most cheek rest devices without stock modifications. Falcon 37 Inc. wanted to create an ergonomic cheek rest device that wouldn’t get in the way of a charging handle while keeping the shooters cheek in the proper position using optics. Having proper cheek weld on the gun minimizes the time the shooter spends “chasing the red dot or reticle” with their eye.

HABU MOD1 CHARGING HANDLE FEATURES:

• Smoother to Operate
• Works on any Stock
• Requires only Major Motor Skills
• Built in, adjustable cheek riser for shooter stability
• Racks like a pistol slide
• Ambidextrous
• Patent Pending latch eliminates latch release
• Minimizes “back spray” into shooters eyes
• Made of 7075 T6 aluminum to Mil Spec standards

CAGE CODE: 7C5Q3
SIC Code: 34840000
Small Arms NAICS Code:    332994
Small Arms, Ordnance and Ordnance Accessories Manufacturer
Registered with US Fed Govt. System for Awards Management (SAMS).

The HABU MOD 1 Advanced Engagement Charging Handle allows for robust charging of the AR-15, while simultaneously integrating a cheek riser.  The HABU’s unique form factor is designed for the non-dominant hand to charge the rifle, much like a semi-automatic handgun, using your full grasp & hand.  This design is completely ambidextrous, with no small latches to worry about engaging.  Proper cheek weld can also be attained, without the use of stock mounted cheek risers, which often interfere with operating the charging handle.  The HABU works with any commercially available AR-15 buttstock, both collapsible & fixed.  The cheek riser’s placement can also be adjusted front to back to suite the shooter’s needs & comfort.  When shooting suppressed, gases exiting the rear almost entirely negated. The handle is machined from 7075 T6 aluminum, with the cheek riser being molded from a matte black polymer.

 


 

308AR AR-10 Primary Build kit

BUILD AN AR 10 | Armalite AR-10 Rifle

BUILD AN AR 10 | Armalite AR-10 Rifle

Do you want to build an Armalite AR-10 Rifle?

Armalite the Only AR-10 - BUILD AN AR 10 or do you really want to build a 308 AR?

Armalite the Only AR-10

BUILD AN AR 10

So you decided you want to build an AR-10 and your internet search delivered you to this site 308AR.com and that’s a great start. The problem is years of misinformation from word of mouth, published media and now the internet has steered many shooters down the wrong path in both purchasing rifles and building their own from parts bought online. To clear this up and educate visitors we will start with a brief little historical information and some misconceptions.

ARMALITE is the ONLY AR-10 Rifle

The AR-10 is a trademarked model designation of a rifle model from ARMALITE. No other large frame AR in .308 should be referred to as an AR-10. This is the reason I started referring to other branded weapons as 308 AR Rifles (AR308).

Inevitably I get email and negative comments on the subject but here’s why I stick to my guns in using proper naming. That reason is compatibility. These large AR rifles do not share the same interchangeability as their AR-15 counterparts and that is very important. I like to use analogies when this subject comes up. All muscle cars are not Mustangs, all bolt action rifles are not model 700’s and all Cola’s are not Coke. ARMALITE is the ONLY AR-10. If you want to build an AR-10 head over to Armalite and order an authentic AR-10 UPPER RECEIVER/AR-10 LOWER RECEIVER. I promise you it is the only lower receiver stamped AR-10.

There is no MIL-SPEC AR-10 or 308AR Rifle

There is no Mil-Spec AR-10 or 308AR. Any marketing material stating otherwise is misleading. What can be made Mil-Spec is materials and finishes. Dimensionally there is no MIL-SPEC with regards to parts. The interchangeability and that’s where the confusion of the platform comes in to play. The 308AR platform is full of inconsistency and a lack of interoperability.

Armalite itself has two different styles of AR-10, DPMS has multiple receiver heights on their LR-308 rifles, the DPMS SASS has a proprietary barrel and gas system. Then there’s the DPMS G2 which is an entirely new platform all together. Rock River Arms, POF , all more different than the rest. Once again if you want to build an AR-10 visit Armalite.

If you want to build a 308AR and have some flexibility look towards companies like Aero Precision and Mega Arms as solid bases to begin a 308AR build. Their hardware is first rate and very generic in the way you want it. Of course there is other equally suitable brands but you need to do your homework in advance.

The AR-15 was derived from the Armalite AR-10

There is a misconception that the AR-10 is based on the AR-15. This is completely false. First off AR in AR-10 and AR-15 stands for “ARMALITE RIFLE” and not assault rifle. The AR-10 was developed by Eugene Stoner in 1956. The AR-10 was re-scaled one year later and became the AR-15.

DO YOU STILL WANT TO BUILD AN AR-10?

DO YOU STILL WANT TO BUILD AN AR-10 or would you prefer to build a 308AR? If you still want to build an AR-10 I suggest buying a complete rifle directly from the Armalite. Building an Armalite AR-10 from parts will be a costly endeavor with no benefit over purchasing a rifle from Armalite. If you now realize and understand you want to build a 308AR by all means browse the pages of this website and have at it. The experience is quite rewarding.

I suggest visiting the following links before you proceed.

.


Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

308AR AR-10 Primary Build kit

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK is an adjustable stock for the 308AR, AR-10, AR15 M4 designed to offer the same strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR 2 features a fixed cheek piece to provide a consistent cheek weld in any of its 8 positions, and is compatible with A5-length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR comes standard with front and rear QD sling attachment points, a recessed footman’s loop, the ergonomic MOE SL angled-toe rubber butt-pad, and storage compartment. Buffer tube included, compatible with A5- length springs and buffers as well as carbine springs and buffers (with included spacer).

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK is an adjustable stock for the AR15/M4, designed to offer the same strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.

An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its 9 positions, and is compatible with Carbine as well as A5-length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment. Made in U.S.A.

 

MAGPUL UBR 2 COLLAPSIBLE STOCK FEATURES

  • Mounts on a durable custom Receiver Extension tube (included) to accommodate the common M4 carbine buffer and spring as well as aftermarket A5 buffer systems*
  • Solid “fixed stock” lockup and consistent cheek weld in all positions
  • 9-Position LOP adjustability
  • Adjustment lever requires only gross motor movement to operate yet the entire stock remains streamlined and anti-snag
  • Enhanced lock mechanism with dual locking pawls for maximum drop strength and shock resistance
  • Multi-shell construction provides solid foundation and shields critical operating parts from penetration damage
  • Sloping cheek weld combines a slim profile with user comfort
  • Storage Compartment in tail of stock is removable and the door is reversible for user preference
  • Rubber butt-pad offers an anti-slip surface and increases impact protection
  • Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
  • Sling Mounts
    • Front – QD swivel mount for ambidextrous one-point QD sling mounting
    • Left/Right Rear – Rotation-limited QD swivel sling mounts fit up to 1.5″ push-button swivels
    • Bottom – 1.25″ sling loop (additonal loop accessible when Storage Compartment is removed)

MAGPUL UBR 2 COLLAPSIBLE STOCK

MAGPUL UBR 2 COLLAPSIBLE STOCK

 

MAGPUL UBR 2 COLLAPSIBLE STOCK SPECIFICATIONS

  • Weight, w/Receiver Extension: 21.3 oz.
  • Length: 8.5-12.5 in.
  • Width, max: 1.7 in.
  • LOP Adjustment Range: 4.0 in.
  • LOP, M4 Collapsed: ~11.6 in.
  • LOP, M4 Extended: ~15.6 in.

 

The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, and all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer and spring are required for use with the UBR and are not included.

MAGPUL UBR 2 COLLAPSIBLE STOCK


Rotor Clip A-300 – The AR Ejection Port Cover Hinge Pin Clip Tool

Rotor Clip A-300 – The AR Ejection Port Cover Hinge Pin Clip Tool

Picture of an AR-10 and AR-15 Ejection Cover Hinge Pin Clip Tool Rotor Clip A-300

AR15 Ejection Cover Hinge Pin Clip Tool Rotor Clip A-300

Picture of an AR-10 Ejection Port Hinge Pin C Clip

AR-15 308AR AR-10 Ejection Port Hinge Pin Clip

AR Ejection Cover Hinge Pin Clip Tool

AR-15 and AR .308 Ejection Cover Hinge Pin Clip Tool – There are a couple tricky areas when building an AR-10, 308 AR AR-15 etc. All are pretty easily tackled with special tools and patience. There is one part though rarely mentioned as being difficult but can give a builder fits (especially this guy with missing/short fingers). That part is the tiny c-clip on the ejection port door cover. It’s small and difficult to install with ease. Well the other day I was browsing Brownells gunsmithing tools section of their website when I happened across what they have labeled “AR Ejection Cover Hinge Pin Clip Tool“. It turns out this handy little gem of a tool is from a company called ROTOR CLIP. Rotor clip is a manufacturer of snap-rings, e-clips and yes the c-clip of the AR15 Ejection Cover Hinge Pin. Rotor Clip also manufacturers tools for installing and removing the previously mentioned fasteners.In this case the tool is a C-Clip Installation Tool manufacturers part number is A-300. I checked stock at industrial supply houses  as well as Amazon and Sears $46 was the going rate, Yikes. Brownells was half the cost plus I’m an edge member and have those shipping perks.

I think tonight I will go home and remove all the c-clips from my ejection port cover pins just to reinstall them just for fun.

AR15 Ejection Cover Hinge Pin Clip Tool Tip

AR-15 Ejection Cover Hinge Pin Clip Tool Tip

AR15 Ejection Cover Hinge Pin Clip Tool features split-lip design that lets you easily install ejection cover hinge pin clip. No more c-clips shooting across the room. Just slide c-clip into recess in the tool and snap into place. Squared handle makes it easy to grip and manipulate.

Save

Save

Save

Save

Save

Save

Save

Save