AERO PRECISION 6.5 CREEDMOOR AR 22″ OEM RIFLE (Cheap)

AERO PRECISION 6.5 CREEDMOOR AR 22″ OEM RIFLE (Cheap)

Aero Precision 6.5 Creedmoor OEM Rifle
Aero Precision 6.5 Creedmoor OEM Rifle

AERO PRECISION 6.5 CREEDMOOR AR 22" OEM RIFLE AERO6522

The Aero Precision 6.5CM OEM Rifle is a great way to get in to a 308 AR at a caliber other than .308 Winchester. The other caliber is the incredibly accurate 6.5 Creedmoor. If your unfamiliar with the 6.5 Creedmoor it’s gained a lot of press as an option for the United States Military as an option for a platform capable of longer range accuracy than the .308.

Available only from Brownells  the AERO PRECISION 6.5 CREEDMOOR AR 22″ OEM RIFLE AERO6522 is nearly-complete rifle and comes fully assembled, just waiting for you to add a free-float handguard, sighting system, and a buttstock that fits a mil-spec carbine receiver extension. Install them and head to the range!

Constructed using top-quality mil-spec components, Aero Precision’s 6.5 Creedmoor OEM Rifle is ready to be turned into the custom rifle of your dreams at a fraction of the cost you’d normally pay for such a rifle. Part of the cost saving comes from not paying for components you are only going to replace anyway.

Aero Precision 6.5 Creedmoor OEM Rifle Specifications

  • Receivers made from 7075 T6 aluminum forgings
  • Wear- and corrosion-resistant matte black hardcoat anodized finish
  • Barrel machined from extra-strength 4150 chrome-moly-vanadium steel
  • Barrel’s tapered profile minimizes weight down without sacrificing strength & rigidity
  • 5/8″-24 muzzle threads
  • 8620 steel carrier is chrome lined with a phosphate finish on the outside (and, yes, a “properly” staked gas key)
  • Hardened 9310 steel bolt
  • FFL required for purchase
Aero Precision 6.5 Creedmoor OEM Rifle
  • Action Type: Direct Impingement
  • Barrel Length: 22″
  • Capacity: NA
  • Cartridge: 6.5 Creedmoor
  • Finish: Black
  • Front Sight: None
  • Length: 39″
  • Magazine Included: NA
  • Magazine Type: Removable
  • Muzzle: Flash Hider
  • Rear Sight: None
  • Stock Material: NA
  • Weight: 6.5 lbs
  • Made in the USA
<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

AERO PRECISION 6 5 CREEDMOOR ASSEMBLED UPPER RECEIVER

AERO PRECISION 6 5 CREEDMOOR ASSEMBLED UPPER RECEIVER

TWO SIDE VIEWS OF A AERO PRECISION M5E1 ASSEMBLED UPPER RECEIVER 6.5 CREEDMOOR BLACK
PICTURE OF AN AERO PRECISION M5E1 6.5 CREEDMOOR ASSEMBLED UPPER RECEIVER

AERO PRECISION 6.5 CREEDMOOR ASSEMBLED UPPER RECEIVER

So you have DPMS pattern 308 AR chambered in .308 Winchester and your bored with it, want something different or want the utmost accuracy at ranges beyond .308 Winchesters capabilities. Well Aero Precision has just what you need in their M5E1 6.5 Creedmoor Assembled Upper Receivers. These receivers fit most 308AR’s that follow the DPMS pattern. The Aero Precision M5E1 uppers are a very slick design that eliminates a barrel nut by implementing a proprietary upper receiver and M-LOK handguard system. The 6.5 Creedmoor chambered upper are available in 16″, 18″, 20″ and 22″ barrel lengths.

AERO PRECISION M5E1 6.5 CREEDMOOR ASSEMBLED UPPER RECEIVER

From Aero Precision, the DPMS Gen 1 pattern 308 AR 16”, 18″, 20″ and 22″ Assembled Upper Receivers. Chambered in 6.5 Creedmoor, the upper is finished with black anodizing. This upper does not come with the charging handle or bolt carrier group, allowing the user to personalize their upper receiver even more! The Aero Precision Assembled Upper Receiver also features:

  • M4 style handguard
  • Carbine length barrel with pinned front sight base
  • 16″ Carbine length gas system, 18″ Mid length gas system, 20″,22″ Rifle length gas system
  • Standard A2 flash hider
  • Bolt Carrier Group and Charging Handle NOT included
  • Made in the USA

The Aero Precision 6.5 Creedmoor 16”, 18″, 20″ and 22′ Assembled Upper Receivers are a great choice for your next 308 AR DPMS Platform build!

 

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM
PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM 2

PROOF RESEARCH CAMGAS GAS SYSTEM

Add Proof Research to the list of 308AR barrel and rifle manufacturers to implement a non standard gas length on their 6.5 creedmoor barrels. Some companies refer to this new length as +2 (plus 2 inches). Proof Research designates their new gas length as “CAMGAS”. Moving the gas ports 2 inches closer to the muzzle adds a bit of dwell to the pressure curve. Basically it tames the action resulting smoother cycling and function. Check availability.

Proof research recommends the JP high pressure bolt. JP uses the high pressure bolt in their +2 rifles. Obviously a +2 gas tube is also required.

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

The PROOF Research AR 308 PR-10 barrel provides owners of AR-10-pattern rifles with a 6.5 Creedmoor-chambered rifle that includes a number of enhanced features over traditional barrel styles. These long range specific barrels provide the ultimate in accuracy and will maintain their performance in the harshest of conditions.

The PROOF Research AR 308 PR-10 barrel  uses the company’s innovative CamGas system, which works to reduce the speed of the bolt carrier and improve overall function and reliability of 6.5 Creedmoor semi-auto rifles.

  • Provide shooters with enhanced accuracy on par with match-grade guns
  • Better cooling properties provide improved barrel life
  • POI shift does not occur during extended fire strings
  • The proprietary gas tube is included, but requires use of a JP enhanced high pressure bolt for best function. (452-000-113)

The PROOF Research AR 308 PR-10 barrel is cut rifled from double stressed relived 416R stainless steel and features a threaded muzzle with a 5/8×24 TPI thread pitch for the addition of muzzle accessories.

PROOF RESEARCH CAMGAS GAS SYSTEM

With the release of its new patent-pending Caliber Matched Gas System (CAMGAS) barrels, PROOF Research has eliminated the issues traditionally associated with building 6.5mm and .260 rifles on 308 AR AR-10 platforms. Until now, AR-variant shooters looking for ballistic advantages from either of these calibers were faced with excessive bore pressures that necessitated makeshift solutions such as clipping buffer springs, adjusting buffer weights, and/or relying on adjustable gas blocks, to keep their rifles functioning properly.

PROOF’s R&D team has solved the overpressure issue with gas systems tuned specifically to the cartridge/barrel-length combination. “By moving the gas port, the pressure in the bore is given time to reduce to that comparable of a .308 Winchester with a rifle-length gas system, which is what the 308 AR AR-10 system was designed around,” said Greg Hamilton, PROOF’s research-and-development weapons specialist who’s also a 3-Gun and PRS competitive shooter. “The recoil impulse is noticeably smoother, which helps keep you on target while taking advantage of a more efficient projectile. Case extraction is also easier, with less case-head smearing, so the brass is in much better condition for reloading.”

In recent years, 6.5mm Creedmoor and .260 Remington have become increasingly popular in long-range shooting competitions. The .260 in particular represents an outstanding caliber for a military counter-sniper role—out to roughly 1,000 meters—in smaller- to mid-sized weapon systems. It offers exceptional accuracy and superior ballistics over the ubiquitous .308 while dishing out substantially less recoil and enough energy to make it a legitimate contender for military and law enforcement applications.

“I’ve been using prototype CAMGAS barrels, in both .260 and 6.5 Creedmoor, in competition for almost a year with excellent results,” Hamilton explained. “Both rifles ran flawlessly through high-round, fast-cadence stages, firing hundreds of rounds with 100 percent reliability and zero maintenance or cleaning. From recoil to reliability, every aspect of performance was improved compared to the typical un-tuned barrel.”

PROOF Research currently offers Caliber Matched Gas System barrels chambered for 6.5mm Creedmoor and .260 Remington in three separate lengths: 20, 22, and 24 inches. Every CAMGAS barrel comes standard with an easy to install custom-length gas tube.

Visit Proof Research

6.5 Creedmoor Military Interest Rumors Continue

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle

6.5 Creedmoor Military Interest Rumors Continue to come in at a brisk rate from military and financial channels. I’ve been at this for a long time and  this story seems to be evidence of a real move by the US military to adopt a more accurate and powerful round than the 5.56 and 7.62 NATO.

New rifle, bigger bullets: Inside the Army's plan to ditch the M4 and 5.56

After carrying the M16 or one of its cousins across the globe for more than half a century, soldiers could get a peek at a new prototype assault rifle that fires a larger round by 2020.

Army researchers are testing half a dozen ammunition variants in “intermediate calibers,” which falls between the current 7.62 mm and 5.56 mm rounds, to create a new light machine gun and inform the next-generation individual assault rifle/round combo.

The weapon designs being tested will be “unconventional,” officials said, and likely not one that is currently commercially available.

Some intermediate calibers being tested include the .260 Remington, 6.5 Creedmoor, .264 USA as well as other non-commercial intermediate calibers, including cased telescoped ammo, Army officials said.

If selected by senior leaders, the weapon could resolve a close-quarters weapons debate about calibers that critics say dates to the 1920s and has influenced military small arms ever since.

If successful, the new rifle and round combination would give troops a weapon they can carry with about the same number of rounds as the current 5.56 mm but with greater range and accuracy in their firepower — with little change in weight.

The new rifle would likely replace the M16/M4 platform, which has been in the hands of troops since the 1960s and undergone multiple modifications and upgrades.

Maj. Jason Bohannon, lethality branch chief at the Army’s Maneuver Center of Excellence at Fort Benning, Georgia, and Matt Walker, deputy director of the branch and a retired command sergeant major, spoke recently to Army Times about broad efforts in small arms weapons research and development.

‘Better option’

Work on the new round began in recent years, Bohannon said, and much of the next steps in developing both the round and rifle will be driven by the Small Arms Ammunition Configuration study.

The study has been going on since at least 2014, according to the Army.

The study is expected to conclude in the next three months, Walker said.

Portions of that report and its findings will likely be made public, but other portions may be deemed sensitive, they said.

Multiple active and retired military arms advocates and industry experts have presented papers and data on the alleged “overmatch” that U.S. troops face on the battlefield with their current calibers.

One oft-noted recent study was authored by then-Army Maj. Thomas Ehrhart, who wrote a 2009 paper titled, “Increasing Small Arms Lethality in Afghanistan: Taking back the Infantry Half-Kilometer.”

The paper drew from soldiers’ experience in Afghanistan firefights.

Ehrhart wrote that half of the firefights infantry units in Afghanistan encountered were past 300 meters, and the 5.56 mm round had lessened lethality at longer distances.

He offered two solutions — a more effective 5.56 mm round, or the “better option” of adopting a caliber in the 6.5 mm to 7 mm range.

The major then cited a 2006 study by the Joint Service Wound Ballistics–Integrated Product Team, which also named the ideal caliber in the 6.5 mm to 7 mm size.

Decades-old debate

This isn’t the first time ammunition experts have reached that conclusion.

“There is a long-running debate, going back almost 100 years now, about the optimal, optimum small arm,” said retired Maj. Gen. Robert Scales, author of the 2016 book “Scales on War: The Future of America’s Military at Risk.”

Scales pointed to the development of the M1 rifle by John Garand in the 1920s.

At the time, Garand built both a .30 caliber and a .276 caliber version of the rifle.

But a surplus of .30 caliber ammunition from World War I, coupled later with the financial constraints of the Great Depression, led to senior defense officials and political leaders calling for a .30 caliber rifle.

The M1’s design eventually evolved into the M14. Both rifles share a 7.62 mm or .30 caliber bore. But the M14 was soon discarded when, in the 1960s, Air Force Gen. Curtis LeMay purchased the early version of the M16 for some Air Force units.

The M16 was then adopted across the branches and fielded for service in Vietnam, where troops reported frequent jamming and malfunctions in early versions of the weapon.

One case, detailed in the 2010 book “The Gun,” by former Marine and award-winning journalist C.J. Chivers, grabbed national attention during the Vietnam War when Marine 1st Lt. Michael Chervenak wrote an open letter that recounted his company’s experiences with the new rifle jamming in combat.

The letter led to hearings in Congress and, along with other incidents, contributed to decades of controversy, modifications and adaptations, which resulted in the current M4 variants, which continue to have their supporters and critics.

Maj. Thomas Campbell, a spokesman for Army Training and Doctrine Command, provided Army Times with the results of a nine-year, post-deployment survey of 9,000 soldiers conducted by the command.

The survey saw 80 percent of troops rate the M4 as “effective or better.”

The survey did not compare the M4 to other weapons, but instead asked the respondents to rate the overall effectiveness of the weapon in the performance of their duties while deployed, Campbell said.

Time to invest

The aging M16/M4 platform is nearing the end of its life cycle, Bohannon said.

“Right now the [M16/M4] platform we have is a workhorse and very effective in the hands of a trained soldier or Marine,” he said.

But, Walker at Maneuver Center added, the Army can’t continue to ask more of the weapon system that has been in service for so long.

“Our next investment will likely be in a new operating platform,” Bohannon said.

Critics of the M16/M4 and the 5.56 mm round say no matter what has been done to improve the M16 and its subsequent variations, the 5.56 mm round lacks the range and lethality needed in modern firefights.

Some of the concerns Scales said he believes are driving military leaders to finally look at an alternative to the 5.56 mm and the M16/M4 include:

— Improvements in adversaries’ body armor, which make the 5.56 mm less lethal.

— Current adversaries such as the Islamic State terror group and others using bigger rounds with more reach against U.S. troops, creating an overmatch.

— Jamming problems with M16/M4 variants that continue to plague the design.

At the 2016 National Defense Industrial Association Armament Systems Forum, retired Brig. Gen. Dave Grange and Jim Schatz, an Army veteran and weapons expert who has since passed away, each gave presentations calling for a new “intermediate caliber” in the 6.5 mm range.

They also referenced the Russian, Islamic State and al-Qaida advantages with longer-reaching and more lethal weapons, including reports of Russian work on their own 6.5 mm assault rifle.

But, Scales said, one of the problems that led to the .30 caliber being adopted over the 6.5 mm nearly a century ago still remains — an abundance of 5.56 mm ammunition stockpiled across U.S. military commands and NATO, whose nations fire the 5.56 mm and 7.62 mm as part of an ammunition standardization agreement made decades ago.

Other weapons work

Meanwhile, the Army’s Maneuver Center isn’t the only entity looking at new or existing small arms replacements.

Marine Corps Times, a sister publication of Army Times, recently reported the Marines are considering equipping nearly every Marine 0311 infantryman with the M27, which first hit the fleet in large quantities in 2010.

The M27 is seen by experts as superior to the M4 in reliability and increased range. But, at $3,000, it runs three times the cost of an M4 and is still chambered in 5.56 mm.

U.S. Special Operations Command is currently testing a new commercially available sniper rifle using the .260 Remington and 6.5 mm Creedmoor rounds, which “stay supersonic longer, have less wind drift and better terminal performance than 7.62 mm ammunition,” said Maj. Aron Hauquitz.

SOCOM is also developing polymer ammunition in 6.5 mm to reduce the weight load.

Current research is showing polymer 6.5 mm reducing weight by one-third from 7.62 mm, reaching nearly the same weight as conventional brass 5.56 mm.

Both regular Army weapons researchers at the Maneuver Center and Marine Corps weapons experts are monitoring the SOCOM testing, officials said.

Military Times

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle
Textron Systems, a private defense industry company, conducted a caliber study using a specially designed .264 caliber cartridge which they said resulted in “terminal effects greater than 7.62 mm NATO out to 1,200 meters” in both their carbine and machine gun.

Data provided by the company showed the machine gun is 7 pounds lighter than the 7.62 mm M240L with 800 rounds of their lightweight ammunition, lowering the combat load by 27 pounds.

The machine gun is also lighter than the M249 SAW, wrote Paul Shipley, chief engineer of light armaments for the company.

While SOCOM is looking at immediate fixes and off-the-shelf options, Bohannon said that the Maneuver Center and related entities working on weapons issues for the regular Army “invests in more revolutionary, long-term” solutions.

Bohannon said that his team has weekly meetings with officials involved with the Joint Service Small Arms Requirements Integration working group, which includes all the services and SOCOM.

While the Army continues to explore existing intermediate rifle/round combinations, their work is only to provide options for senior leadership to choose and then request funding, Bohannon said.

He did not provide cost estimates or a timeline for the potential replacement.

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle

Special Operations Command is exploring a new caliber for its semi-automatic sniper rifle needs and upgrading one of its bolt-action sniper rifle systems.

Maj. Aron Hauquitz told Military Times Tuesday that SOCOM is in the preliminary stages of exploring a sniper rifle chambered in the 6.5 mm caliber. The two commercially available rounds being evaluated are the .260 Remington and the 6.5 mm Creedmoor.

Research shows that both rounds will “stay supersonic longer, have less wind drift and better terminal performance than 7.62 mm ammunition,” SOCOM officials said.

Hauquitz said that the research is focused on the popularity and availability of the cartridge, and finding out the benefits and drawbacks of the different rounds.

At the same time, SOCOM is working to develop polymer ammunition in 6.5 mm to reduce the load for operators, Hauquitz said. Research is showing a one-third weight reduction for 7.62 mm ammunition, allowing the 6.5 mm to come in at 5.56 mm weight ranges.

While both the rifle and the ammunition are being developed together, Hauquitz said the polymer portion of the research would not delay potential fielding of a 6.5 mm rifle.

He didn’t provide a specific date or timeline for when the new rifle would be in operators’ hands but said they would have a better idea regarding the caliber later this year.

“We’re purely in the exploratory phase,” Hauquitz said. “We’re trying to see if we can take a weapon that is 7.62 and give it greater range, accuracy and lethality.”

Hauquitz said the 6.5 mm exploration came out of preliminary results of the Small Arms Ammunition Configuration study, which evaluates for the military commercially available ammunition, emerging ammunition capabilities, and ammunition technologies for conventional and non-conventional calibers.

Last year, the Army chose the smaller Heckler & Koch G28 Compact Semi-Automatic Sniper System for close-quarters fighting to replace the M110 made by Knight’s Armament. Both fire the 7.62 mm round.

At the time, H&K received the $44.5 million contract to manufacture up to 3,643 rifles over two years.

Meanwhile, the changes SOCOM is seeking for its bolt-action sniper rifle became public earlier this month with a “sources sought” notice. The rifle’s development also involves Marine snipers.

The SOCOM contracting office posted the notice for an Advanced Sniper Rifle on the Federal Business Opportunities website on April 6. Industry responses are due on April 24.

SOCOM’s current bolt-action rifle is made by Remington Defense, which won the $79.7 million government contract in 2013 after the initial announcement was posted in 2009. Dubbed the Precision Sniper Rifle, it included three quick-change barrels in calibers 7.62 mm NATO, .300 Winchester Magnum and .338 Lapua Magnum for various distance and power needs.

Lt. Cmdr. Lara Bollinger, a SOCOM spokeswoman, said Friday that the ASR has “far more refined” requirements and performance specifications than the current PSR sniper rifle.

The website states that the posting is not a solicitation or request for proposal but meant to “obtain information for planning purposes only.”

The PSR was designed to replace the three sniper rifles then being used by special ops snipers — the .300 Winchester Magnum MK13, the M40, which shoots 7.62 mm NATO, and the M24, which has separate versions that fire the 7.62 mm NATO and a .338 Lapua Magnum, according to Remington.

The recent announcement asks for industry information about a seemingly identical rifle but adaptable for the 7.62 mm NATO, .300 Norma Magnum and .338 Norma Magnum.

Firearms experts generally cite the Norma Magnum design as producing a faster and more accurate round.

SOCOM listed the following needs for the Advanced Sniper Rifle as a potential Precision Sniper Rifle replacement:

•A light/sound suppressor that can be attached to the system when needed.
•A system that includes three caliber conversion kits that can fire the 7.62 mm NATO, .300 Norma Magnum and .338 Norma Magnum.
•Not to exceed 17 pounds or a total length, without suppressor, of 50 inches.
•A folding or collapsing stock.

The 2013 PSR contract requested up to 5,150 PSRs and 4.6 million rounds of ammunition, according to the Remington website.

During the development of the PSR, the Marine Corps opted to continue to upgrade the M40 sniper rifle platform, which shoots the 7.62 mm NATO, despite some who argued for the larger caliber .338 as an option.

A Marine spokesman said Thursday that they are continuing to make modifications to the M40A6 while also working with the Army and Special Operations Command to develop the Advanced Sniper Rifle.

The modifications include an improved, shorter barrel, modular stock and 1.2-pound weight reduction, said Billy Epperson of Marine Corps Combat Development Command.

The new barrel increases bullet flight stability, he said. The new stock incorporates a folding adjustable buttstock, and additional accessory rails will support aiming lasers and optics. Each rifle also comes with a new pack, ballistic calculator, weather station and chronograph for muzzle velocity recordings.

As the ASR is developed, Epperson said the Marines are “assessing the MK13 as a potential interim solution” to increase sniper teams’ range and lethality.

The .300 Winchester Magnum MK13 has a farther range than the 7.62 mm NATO round the M40A6 uses. The MK13 is a rifle that has been used by Army snipers and other units.

Regular Army snipers continue to use the bolt-action M2010 Enhanced Sniper Rifle, also produced by Remington. It is chambered in .300 Winchester Magnum.

Wilson Combat Super Sniper 6.5 Creedmoor

Wilson Combat Super Sniper 6.5 Creedmoor

Wilson Combat Super Sniper 6.5 Creedmoor

Unmatched reliability meets pinpoint accuracy in the Wilson Combat Super Sniper, the ultimate semi-automatic sharpshooting platform!

Wilson Combat Super Sniper 6.5 Creedmoor Description

Unmatched reliability meets pinpoint accuracy in the Wilson Combat Super Sniper 6.5 Creedmoor, the ultimate semi-automatic sharpshooting platform! Wilson Combat’s legendary match-grade barrel– the heart of the rifle– elevates it among its contemporaries as the top choice of long range accuracy seekers. The barrel is precision button rifled from 416-R stainless steel, then chambered and reverse crowned for exceptional accuracy. The 1-8” twist chosen for the Super Sniper delivers consistent results all the way to 1000 yards with a broad range of bullet weights. Our BILLet-AR machined-aluminum upper and lower receivers are designed and engineered to close tolerances. These allow for an ideal fit and a precisely bored bolt raceway for smooth operation. Our exclusive Wilson Combat free-floating T.R.I.M rail is a comfortable and versatile handguard platform for mounting your favorite accessories.

Wilson Combat Super Sniper 6.5 Creedmoor Specifications

  • Billet Upper (Flat Top) and Lower Receiver
  • Wilson Combat Recon Tactical Match Grade Barrel
  • Rifle Length Gas System with Lo-Profile Gas Block
  • Threaded Muzzle with Q-Comp Flash Hider
  • Wilson Combat 14” T.R.I.M. Rail
  • Rogers/Wilson Super-Stoc
  • Wilson Combat TTU (Tactical Trigger Unit) Single Stage, 4#
  • Premium Bolt Carrier, MP Inspected, NP3 Coated
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers
  • Available Calibers: 6.5 Creedmoor
  • Barrel Length: 22″, 24″
  • Overall Length: 44″
  • Weight Empty: 10.2 lbs
308AR AR-10 Bolt Carrier Group Link
308AR AR-10 Scope Link
308AR AR-10 Trigger Link
308AR AR-10 Technical Link

Wilson Combat Recon Tactical 6.5 Creedmoor

Wilson Combat Recon Tactical 6.5 Creedmoor

Wilson Combat Recon Tactical 6.5 Creedmoor

The heart of every Wilson Combat Recon Tactical 6.5 Creedmoor is the unsurpassed Wilson Combat match-grade medium weight stainless steel barrel designed for gilt-edge accuracy and sustained high rates of fire. The Recon Tactical is the Wilson Combat vision of what a practical, all-around 6.5 Creedmoor AR is for rigorous tactical training, hardcore hunting or all-purpose field applications should be. The Recon can do it all-very well. Loaded with Wilson Combat custom features and accessories, this popular model has never been better.

Wilson Combat Recon Tactical 6.5 Creedmoor Specifications

  • Billet Upper (Flat Top) and Lower Receiver
  • Wilson Combat Recon Tactical Match Grade Barrel
  • Rifle Length Gas System with Lo-Profile Gas Block
  • Threaded Muzzle with Q-Comp Flash Hider
  • Wilson Combat 14” T.R.I.M. Rail
  • Rogers/Wilson Super-Stoc
  • Wilson Combat TTU (Tactical Trigger Unit) Single Stage, 4#
  • Premium Bolt Carrier, MP Inspected, NP3 Coated
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers
  • Available Calibers: 6.5 Creedmoor
  • Barrel Length: 16″, 18″, 20″
  • Overall Length: 40″
  • Weight Empty: 7.85 lbs
308AR AR-10 Bolt Carrier Group Link
308AR AR-10 Scope Link
308AR AR-10 Trigger Link
308AR AR-10 Technical Link