by Donald Sullivan | May 9, 2015 | 308AR Bolt Carrier | AR-10 Bolt Carrier | AR308 Bolt Carrier |
Exploded View – DPMS LR-308 Bolt Carrier Group
DPMS .308 bolt carrier parts list and image. This 308 Bolt Carrier is also the same as the Fulton Armory 308 Bolt Carrier Group
DPMS LR-308 Bolt Carrier Group
DPMS LR-308 Bolt Carrier Group Parts
Below is the parts needed to assemble a DPMS LR-308 Bolt Carrier Group. DPMS and part suppliers omit the 308 portion of the part numbers. Example : Bolt Carrier BT-12
- 308-BT-16 – Firing Pin Retaining Ring
- 308-BT-12 – Bolt Carrier
- 308-BT-03 – Extractor Pin
- 308_BT-17 – Cam Pin
- 308-BT-02 – Bolt
- 308-BT-14 – Firing Pin
- BT-11 – Bolt Carrier Key
- BT-10 – Bolt Carrier Key Screw
- 308-BT-07 – Extractor
- 308-BT-08 – Extractor with Extractor Spring
DPMS LR-308 Bolt
Save
Save
Save
Save
by Donald Sullivan | May 9, 2015 | Manufacturers, Remington |
Remington R-25 GII
Remington R-25 GII Overview:
Delivering heavyweight punch in a platform that’s now more than a full pound lighter, the Remington R-25 GII marks a bold new chapter in America’s hunting legacy. Every design aspect was rethought and optimized to create the most agile and dependable modern sporting rifle on the planet. Each tuned to deliver the hair-splitting accuracy you expect from a Remington centerfire rifle. The heart of its downsized, yet stronger foundation is a matched pair of forged, anodized, Teflon®-coated 7075 upper and lower receivers. A lighter, more efficient bolt carrier, plus improved extractor and dual ejectors results in more reliable cycling. The vented carbon fiber free-float tube and Houge rubber pistol grip add to its exceptional feel. Shoulder the new Remington R-25 GII, and experience the full capability of the modern sporting rifle.
Key Features:
- 20” stainless steel, Teflon-coated barrel, target crown muzzle
- Fixed, lightweight stock with SuperCell® Recoil pad
- Houge® pistol grip
- Carbon fiber vented free float hand-guard
- Two stage match trigger
visit Remington
by Donald Sullivan | May 6, 2015 | AR 308 Receivers, Si Defense |
SI Defense 308 AR Generation II Stripped Upper Receiver
SI Defense is now operating as FALKOR Defense
FALKOR Defense is a world class firearm manufacturer, with a doctrine that emphasizes research and development that produces ingenuity and innovation. FALKOR Defense is located in Kalispell Montana, where its 50,000 square foot facility manufactures its products using the latest aerospace technology in CNC Machining, Anodizing, and Assembly. Its products are 100% made in the U.S.A and are held to the highest manufacturing standards.
As FALKOR Defense continues to evolve, its legacy continues to grow as one of the most innovative, accurate, and reliable firearm manufacturers in the world. The mission is to continually exceed the expectations of the consumer by delivering firearm technology that is relevant and value added without jeopardizing quality and reliability.
Here’s a few pictures of my SI Defense Generation II Billet Generation II Stripped Upper Receiver. The upper is DPMS/SR25 pattern.
SI Defense Generation II 308 Upper Receiver. Falkor Defense
SI Defense Generation II 308 Upper Receiver. Falkor Defense
by Donald Sullivan | May 6, 2015 | Manufacturers, Tactical Machining |
Tactical Machining AR-10 308 AR AR308 80% Rifle Parts
TACTICAL MACHINING DPMS/SR25 PATTERN 308 AR RECEIVERS
TACTICAL MACHINING.
About TM
Tactical Machining was formed in 2008 to craft high quality parts for the AR-15 platform. Since then we’ve expanded our product line to include products for the home gun smith and the TM-10 platform. We are a full service machine shop. Tactical Machining is proud to say our products are American made in Deland, Florida using the highest quality materials available and held to tight tolerances.
Our Future
We look forward to supporting the shooting community by creating quality products and continuing to offer them at an affordable price. We are not looking to rake our customers over the coals. We are constantly adding new products so keep your eye out for what we have to offer.
We stand behind our products
We take pride in our workmanship and are proud to stand behind our products. If for any reason you are not happy with your purchase we’ll do everything in our power to make it right. If you find our product is defective, we’ll replace it. It’s as simple as that.
TACTICAL MACHINING 308 AR RECEIVER IMAGE GALLERY
Tactical Machining AR-10 308 AR AR308 80% Rifle Parts
by Donald Sullivan | May 3, 2015 | Bipods |
Tango Down Advanced Combat Bipod
The Tango Down Advanced Combat Bipod is designed specifically for the M16/M4 weapon families. Attached directly to the MIL-STD 1913 MWS (SOPMOD) rail system, no separate adapters necessary.
Bipod body – The clamp body and center portion are forged from 7075-T6 aluminum with Type III hard anodizing. The center portion has two pivots, to which the legs are attached. It will fit on any MIL-STD 1913 rail, using a clamp on the base that is secured by two stainless, black finish screws. An allen wrench or screwdriver can be used to install or remove the ACB. A black stainless button on the outside of each pivot releases and engages a sealed, pre-lubricated stainless steel locking mechanism, which allows the bipod legs to rotate 90° from stowed to deployed. It is locked in both positions and can only be released by touching the button. The center portion rotates for traversing and allows about 40° of angle. The whole bipod body can cant 15°. Urethane bushings keep the bipod center-favored while allowing it to cant on uneven ground.
Legs – The legs are made up of two pieces – the inner and outer legs. The outer legs house the locking mechanism and button, and have 3 holes/detents which provide 3 height adjustments. The outer legs are made of a proprietary glass-reinforced nylon and are much tougher than they look (I was concerned early on in the design stage when I saw the inner legs, but tried to snap one and I couldn’t. The ACB-4 has exceeded Army drop-test requirements). The inner legs are made of carbon-fiber reinforced nylon, and slide in and out of the outer legs. At the top of the inner leg is a button, which fits into the detents in the outer legs. The inner legs are extended by simply pulling them out. In order to shorten them, the button must be depressed and the leg slid in, where the button will engage the next detent. The feet are large to prevent sinking in sand and aggressively checkered for a good grip. When stowed, the bipod legs are locked along the rail system, fitting neatly between the lower and side rails.
by Donald Sullivan | Apr 14, 2015 | American Spirit Arms |
American Spirit Arms
American Spirit Arms is a leading US manufacturer of precision firearms, offering the highest quality parts, accessories and complete rifles. Modeled after the AR15 ®, M16 rifle ® and M4 carbine, American Spirit Arms builds only the finest components and rifles available today. We manufacture our products in-house at our facility in Scottsdale, Arizona, and this provides an incredibly high standard of quality and design. Our vast experience in machining, gives us the edge in order to build the best firearm components and offer the most reliable, accurate and overall superior rifles.
With our products being used by government agencies, law enforcement and military worldwide, we know how important they are to the people who use them. We pride ourselves on building high quality, accurate and reliable firearms and components that can be counted on to perform in the most demanding conditions and extreme situations. Whether you want a firearm for home defense, target shooting, hunting or competition, if it carries the American Spirit Arms name, you can trust that it’s a quality product that won’t let you down.
by Donald Sullivan | Mar 28, 2015 | Tools |
308 AR Barrel Extension Torque Tool
Brownells 308 AR Barrel Extension Torque Tool
Barrel Extension Torque Tool For 308 AR DPMS Based Barrel Extensions
The Brownells 308 AR Barrel Extension Torque Tool has a very misleading name. In fact my first impression after reading the title lead me to believe the 308 AR Barrel Extension Torque Tool was for tightening the barrel extension to the barrel. THAT IS NOT THE CASE. This tool is for preventing damage to your upper receiver when tightening the barrel nut.
Description: Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½” square drive.
Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the 308AR.
Save
Save
Save
Save
Save
Save
Save
Save
