by Donald Sullivan | Sep 24, 2015 | Armalite |
Armalite AR-10T 60th Anniversary Edition
Armalite AR-10T 60th Anniversary Edition – To commemorate 60 years of heritage, Armalite offers this special limited edition AR-10(T). The 60th Anniversary Edition combines classic Armalite style with unmatched performance in package that target rifle aficionados will recognize as the quintessential AR-10. Only 60 of these very special rifle will be produced, each with a custom engraved lower receiver including our 60th anniversary logo, and a number identifying its sequence in production.
Armalite AR-10T 60th Anniversary Edition Close Up
Armalite AR-10T 60th Anniversary Edition Specifications
- Caliber – 7.62×51 mm / .308
- Barrel – 20” stainless steel match
- Rifling Twist – 1:10” RH
- Muzzle Device – Stainless steel flash suppressor
- Front Sight Base – Stainless steel MIL-STD 1913 rail gas block
- Handguard – Free-floating aluminum, cerakote finish, O.D. green
- Stock – A2
- Upper Receiver – Forged flat-top receiver with MIL-STD 1913 rail and forward assist, 7075-T6 aluminum
- Lower Receiver – 7075-T6 aluminum (forged)
- Safety – Standard
- Trigger – Precision two-stage
- Charging Handle – Standard
- Finish – Hard anodized aluminum, manganese phosphate Steel
- Overall Length – 41.0″
- Weight – 10.3 lbs.
- Included – Detachable carry handle assembly, detachable front sight assembly, one 10-round magazine, owner’s manual, and chamber flag
- Warranty – Limited lifetime
Armalite AR10T60
Armalite AR-10T 60th Anniversary Edition
by Donald Sullivan | Sep 24, 2015 | Seekins Precision |
Seekins Precision SP10 308 16″
Seekins Precision SP10 308 16″
After two years of tireless development and testing, Seekins Precision has introduced the Seekins Precision SP10 308, our large frame AR of unrivaled quality, accuracy and performance.
Based on the excellent and proven iRMT upper receiver, CNC machined from 7075-T6 billet aluminum, the top Picatinny rail extends over the barrel mount to strengthen the receiver and provide more space to mount optics. Coupled with the receiver is the Seekins Precision SP3R free float handguard. Flat on the bottom, the SP3R aids stability for precision shooting. The stainless steel match-grade barrel is specifically contoured to balance the rifle for superior handling performance and weight reduction.
The Seekins Precision mission of unrivaled innovation and performance drove the development of the lower receiver. Also machined from 7075-T6 billet aluminum, the SP10 308 is fully ambidextrous due to superior weapon controls such as the magazine release, selector switch and ambidextrous bolt switch that allows the shooter to lock back or release the bolt with a single finger. Accuracy demands an excellent trigger and the SP10 308 delivers with a 3.5 tuned fire control that guarantees out of the box performance. The proprietary buffer system is housed in a carbine length tube and is fitted with a Magpul STR stock. The SP10 308 is the pinnacle of large frame AR development. Premium features and components come standard to increase accuracy, functionality and reliability. The SP10 308 is hard coat anodized matte black.
Seekins Precision SP10 308 16″ Specifications
- Stock Magpul STR
- Charging Handle BCM Mod 3
- Feed Ramp M4
- Grip Ergo Deluxe Grip
- Trigger CMC
- Selector Ambi
- BCG SP10 Bolt Carrier Group
- Lower SP 308 Lower
- Upper 308 iRMT-3
- Handguard 13″ SP3R
- Gas Block Adjustable
- Gas Tube Melonited Intermediate
- Barrel 16″ Stainless Match Barrel
- Muzzle Device ATC
- 16″Barrel Length
- 13″Handguard Length
- 9.50 Pounds Weight
Seekins Precision SP10 308 16″
by Donald Sullivan | Aug 28, 2015 | 308AR Bolt Carrier | AR-10 Bolt Carrier | AR308 Bolt Carrier, Ballistic Advantage |
Ballistic Advantage Nickel Boron 308AR Bolt Carrier Group
Visit Ballistic Advantage for ordering information
Description
- Carrier Machined from 8620
- .308 Bolt Machined from 9310
- Forged Gas Key Properly Staked
- S7 Tool Steel Extractor
- Heavy Duty Extractor Spring and Viton O-Ring
- Grade 8 hardware
- Shot Peened Bolt
- HPT/MPI
- Forward Assist Serrations
- Carrier, Gas Key, Cam Pin, Bolt, & Extractor coated inside and out with EXO NiB
- Test Fired complete before shipping to ensure proper function
Ballistic Advantage Nickel Boron 308AR Bolt Carrier Group
Save
Save
by Donald Sullivan | Aug 27, 2015 | Manufacturers, Armalite |
Armalite AR-10 Versatile Sporting Rifle
The AR-10 Versatile Sporting Rifle™ is a rifle designed with agility in mind and is built around features that ensure the marksman has the right tool, no matter the job. Accurate, light weight, adjustable, and balanced, the VSR is a capable contender on any field.
AR-10 Versatile Sporting Rifle
by Donald Sullivan | Aug 12, 2015 | 308AR Bolt Carrier | AR-10 Bolt Carrier | AR308 Bolt Carrier, Aero Precision |
Aero Precision Nickel Boron 308 AR Bolt Carrier Group
There are a couple simple reasons to utilize a Nickel Boron 308 AR Bolt Carrier Group in your 308AR and AR-10 rifles. The Nickel Boron Coating by FailZero is super slippery this means the bolt carrier group can operate with much less lubricant, the bolt carrier group will be easier to clean and the coating should allow the bolt carrier group to outlast the weapon under normal operating conditions. Less wear will also occur in the upper receiver. The finish also looks pretty slick.
-
The Aero Precision upgraded .308/7.62 Nickel Boron 308AR Bolt Carrier Group BCG is an eye catching addition to your AR build. Mil- spec dimensions and coating ensure the highest quality and correct component interface. Visit Aero Precision
Features:
- Carrier is machined from 8620 steel
- Nickel Boron coated
- Bolt is machined from 9310 steel
- MPI
- Forward Assist serrations
- Weight: 17.92oz
BCG Includes:
- Bolt carrier
- Complete bolt
- Firing pin
- Cam pin
- Retaining pin
Specifications:
Weight 17.92oz
Platform 308AR DPMS
Nickel Boron coating by Fail Zero. Learn more about Fail Zero Nickel Boron Coating Services.
Drop-in bolt and carrier group has a self-lubricating surface that eliminates the need to apply oil or grease that can attract dirt, dust, unburned powder, and carbon and lead to cycling failures. Proprietary EXO-treated Nickel Boron finish produces an exceptionally hard surface that’s 40% more wear resistant than chrome plating, with an ultra-low friction coefficient. Surface is actually harder than the substrate underneath and will not peel, flake, gall, or rub off. EXO-treated Nickel Boron finish bolt/carrier groups have been tested to function reliably without additional lubrication up to 50,000 rounds. Reduced friction also means less heat generated by metal-on-metal contact, so the gun runs cooler and parts last longer. Easy to clean, too—fouling brushes right off. Before treatment, parts are shot peened for surface uniformity and magnetic particle inspected to make sure there are no hidden flaws. Gas key is hardened to USGI specs, chrome lined to resist erosion, and comes already staked to the carrier.
Aero Precision Nickel Boron 308 AR Bolt Carrier Group
Save
by Donald Sullivan | Aug 5, 2015 | Parts, Carbon Fiber Hanguards, Christensen Arms, Handguards |
Christensen Arms CA-10 Carbon Fiber Lightweight AR-10 308AR Handguards
Christensen Arms CA-10 Carbon Fiber Lightweight AR-10 308AR Handguards
Carbon Fiber AR-10 Handguards – At 7.5 ounces it’s hard to ignore the Christensen Arms CA-10 Carbon Fiber AR-10 Mid-Length handguard. This is lighter than any other mid-length hanguard I am aware of. View the video here.
- Weight – CA-15 (5.45 oz.) / CA-10 (7.5 oz)
- Length – 9.25″
- Christensen Aerospace DNA – Patented design and manufacturing
- Lightweight, Durable, Cutting Edge
- 45% lighter, 2X stiffer & 5X stronger than aluminum handguard
- Integral picatinny rail
- Pre-drilled side holes to accept standard MOE rail sections
Carbon Fiber AR-10 Handguards
