by Donald Sullivan | Oct 4, 2015 | Lower Parts Kits |
Aero Precision 308AR Standard Lower Parts Kit
Aero Precision 308AR Standard Lower Parts Kit APRH100160 helps you to build a custom .308 AR from the ground up. Mil- spec dimensions and coating ensure the highest quality and correct component interface.
Aero Precision 308 Standard Lower Parts Kit APRH100160Features:
- Aero Precision M5 (.308) Complete Lower Parts Kit
- The custom takedown and pivot pins are made to work with our M5 lower. They will work with DPMS-pattern lowers as well but will stick out further.
Aero Precision 308 AR Standard Lower Parts Kit Includes:
- Takedown/pivot Spring
- Takedown/pivot detent
- Trigger/hammer pin
- M5 .308 Takedown pin
- M5 .308 Pivot pin
- M5 .308 Bolt Catch
- Bolt Catch Spring
- Bolt Catch Buffer
- Bolt Catch Roll pin
- Safety Selector
- Safety Selector Spring
- Safety Selector Detent
- Buffer Retainer
- Buffer Retainer Spring
- A2 Pistol Grip
- Pistol Grip Screw
- Pistol Grip Lock Washer
- Trigger Spring
- Hammer Spring
- Disconnector Spring
- Magazine Catch Body
- Magazine Catch Spring
- Extended Magazine Catch Button
- Hammer
- Trigger
- Disconnector
Aero Precision 308AR Standard Lower Parts Kit
by Donald Sullivan | Oct 3, 2015 | AR 308 Receivers, Aero Precision |
Aero Precision Battleworn Orange Grey AR15 Builder Set APPG100025
Aero Precisions October limited run builder set is for the AR15 platform and NOT 308AR/AR-10 (At times the M5 308 AR versions are available). Too interesting not to share here though. BlownDeadline is certainly taking Cerakote to a new level these days and the “Battleworn Orange Grey” finish is a testament to that. This picture above reflects a 15″ KeyMod handguard, M-Lok is also available. Visit Aero Precision for ordering information.
Aero Precision Battleworn Orange Grey AR15 Builder Set APPG100025
-
The October Monthly Builder Set from Aero Precision features a custom Battleworn Orange/Grey Cerakote finish done by BlownDeadline, an industry leader in custom firearms coatings! These pieces feature a custom blend cerakote and are hand finished with no two sets being the same.
This package deal includes the finished pieces you need to assemble your own Battleworn Orange/Grey AR15 M4E1 Rifle, including an M4E1 Upper Receiver, Gen 2 Lower Receiver, Enhanced Handguard, and Billet Trigger Guard all custom finished in Battleworn Orange/Grey. Stand out at the range with a unique and eye-catching build. This is a one time offer for this color – once they are gone, they are gone!
Includes:
- M4E1 Enhanced Upper Receiver
- AR15 Gen 2 Stripped Lower Receiver
- 15″ KeyMod or M-LOK Handguard
- Billet Trigger Guard
- All 4 pieces are finished in Battleworn Orange/Grey
Aero Precision APPG100025 Battleworn Orange Grey AR15 Builder Set
View our entire directory of 308 AR & AR-10 Manufacturers
by Donald Sullivan | Sep 23, 2015 | Compatibility, Lower Parts Kits, Magazines |
Building an Aero Precision m5 308 AR semi-auto rifle and the magazine catch button too short? That’s because you need the proprietary Aero Precision M5 Extended Magazine Catch Button or an Aero Precision M5 Lower Parts Kit. The Aero Precision lower parts kit includes the extended magazine catch button.
Aero Precision Extended Magazine Catch Button APRH308185
Aero Precision Extended Magazine Catch Button
So you have that brand new Aero Precision M5 308 AR lower or perhaps even another brand and you notice the magazine catch button is literally hanging by a thread or two after assembling. Aero has solved this with a $5 part (that Brownells should also offer). That part is Aero Precision Product SKU: APRH308185 Aero Precision M5 Extended Magazine Catch Button.
Aero Precision M5 Extended Magazine Catch Button -The Extended Magazine Catch Button is a drop-in replacement for the standard lower receiver magazine catch button. This extended button is longer, allowing it to protrude the proper distance when used with our M5 Lower Receiver.
View our Complete 308 AR and AR-10 Manufacturers List
Aero Precision M5 Extended Magazine Catch Button solves the “magazine catch is too short” problem builders experience when assembling an Aero Precision M5/308 AR lower receiver.
Radian Raptor Charging Handle
by Donald Sullivan | Sep 11, 2015 | AR 308 Receivers |
Aero Precision 308AR Burnt Bronze Builder Set
Aero Precision has been offering monthly runs of AR15 and 308 AR parts in custom finishes. Septembers Aero Precision 308 AR Burnt Bronze Builder Set is gorgeous and an outstanding value for the 308 AR platform. Note: The builder sets are special runs and you need to get you order in when the sets are announced.
-
September features our first M5 Monthly Builder Set. This package deal features the pieces you need to assemble your own Burnt Bronze Cerakote M5E1 (.308) Rifle, including a AR308 M5 Lower Receiver, M5E1 AR308 Upper Receiver and 15″ KeyMod Handguard all in Burnt Bronze Cerakote. Stand out at the range with a unique and eye catching build. This is a one time offer for this color – once they are gone, they are gone!
Includes:
- M5 Lower Receiver
- M5E1 Enhanced Upper Receiver
- 15″ KeyMod Handguard
- All 3 pieces are finished in Burnt Bronze Cerakote
Extended Magazine Catch Button APRH308185
Note: Aero Precision 308AR M5 Lower Receivers require their own Extended Magazine Catch Button APRH308185. It’s $5 Personally I think it should be included with their lower receivers.
-
The Extended Magazine Catch Button is a drop in replacement for the standard lower receiver magazine catch button. This extended button is longer, allowing it to protrude the proper distance when used with our M5 Lower Receiver.
Aero Precision 308AR Burnt Bronze Builder Set
Save
Save
by Donald Sullivan | Aug 12, 2015 | 308AR Bolt Carrier | AR-10 Bolt Carrier | AR308 Bolt Carrier, Aero Precision |
Aero Precision Nickel Boron 308 AR Bolt Carrier Group
There are a couple simple reasons to utilize a Nickel Boron 308 AR Bolt Carrier Group in your 308AR and AR-10 rifles. The Nickel Boron Coating by FailZero is super slippery this means the bolt carrier group can operate with much less lubricant, the bolt carrier group will be easier to clean and the coating should allow the bolt carrier group to outlast the weapon under normal operating conditions. Less wear will also occur in the upper receiver. The finish also looks pretty slick.
-
The Aero Precision upgraded .308/7.62 Nickel Boron 308AR Bolt Carrier Group BCG is an eye catching addition to your AR build. Mil- spec dimensions and coating ensure the highest quality and correct component interface. Visit Aero Precision
Features:
- Carrier is machined from 8620 steel
- Nickel Boron coated
- Bolt is machined from 9310 steel
- MPI
- Forward Assist serrations
- Weight: 17.92oz
BCG Includes:
- Bolt carrier
- Complete bolt
- Firing pin
- Cam pin
- Retaining pin
Specifications:
Weight 17.92oz
Platform 308AR DPMS
Nickel Boron coating by Fail Zero. Learn more about Fail Zero Nickel Boron Coating Services.
Drop-in bolt and carrier group has a self-lubricating surface that eliminates the need to apply oil or grease that can attract dirt, dust, unburned powder, and carbon and lead to cycling failures. Proprietary EXO-treated Nickel Boron finish produces an exceptionally hard surface that’s 40% more wear resistant than chrome plating, with an ultra-low friction coefficient. Surface is actually harder than the substrate underneath and will not peel, flake, gall, or rub off. EXO-treated Nickel Boron finish bolt/carrier groups have been tested to function reliably without additional lubrication up to 50,000 rounds. Reduced friction also means less heat generated by metal-on-metal contact, so the gun runs cooler and parts last longer. Easy to clean, too—fouling brushes right off. Before treatment, parts are shot peened for surface uniformity and magnetic particle inspected to make sure there are no hidden flaws. Gas key is hardened to USGI specs, chrome lined to resist erosion, and comes already staked to the carrier.
Aero Precision Nickel Boron 308 AR Bolt Carrier Group
Save
