FAXON FIREARMS BIG GUNNER PROFILE 308 AR DROP-IN BARREL

FAXON FIREARMS BIG GUNNER PROFILE 308 AR DROP-IN BARREL

Picture of a FAXON FIREARMS BIG GUNNER PROFILE 308 AR BARREL

FAXON FIREARMS BIG GUNNER PROFILE 308 AR BARREL .308 Winchester

The Faxon Firearms Big Gunner .308 Win. Barrel’s profile is a marriage of Faxon’s Government and Pencil profiles that gives balance of manageable weight and high accuracy potential. It has the Government taper from the barrel extension to the gas block, then transitions to a Pencil profile from the block to the muzzle. Keeping weight at the rear maximizes rigidity and resistance to heat distortion, while removing it up front moves the center of gravity to the rear, keeping your “AR-308” nicely maneuverable.

Each Big Gunner .308 Win. barrel is machined from triple stress-relieved 416R stainless steel, and finished it with a tough, wear-resistant matte black QPQ Nitride finish.

  • Fits DPMS LR-308 Gen1 pattern upper receiver OR Armalite AR-10 upper when used with Faxon Bolt Carrier Group (not included)
  • 5R rifling with 1-10″ twist ensures both accuracy & easy of cleaning
  • 11° target crowned muzzle
  • 5/8″-24 threaded muzzle
  • Each barrel individually checked for headspace with custom gauges

Faxon Big Gunner .308 Win. Barrels are available in 16″ length drilled for a mid-length gas tube, as well as 18″ and 20″ lengths drilled for a standard rifle gas tube.

Gun Tech Note: These barrels are chambered for .308 Winchester. 7.62×51 NATO ammo requires deeper head spacing but will normally will fit the chamber and function. However, Faxon does not guarantee the function of 7.62×51 ammunition, particularly with tight, “mach” .308 Win headspacing.

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

Republicans May Consider Bump Stock Ban (Knee Jerk Reaction)

Republicans May Consider Bump Stock Ban (Knee Jerk Reaction)

SlideFire Bump Fire Stock Picture

October 4 2017, 308 AR: Here we go friends “Republicans May Consider Bump Stock Ban“. I pondered on more than one occasion how long before there would a different kind of gun incident that would empower and embolden the liberal media and anti-gun politicians eager for further gun control. While bump fire stocks were on my list of possibilities it was last on my list. I honestly thought with silencers becoming main stream that an unfortunate event would occur by thugs with a stolen suppressed handgun. I thought it would be in a city and part of gang warfare or something to that effect. Never in my wildest dreams would I expect a millionaire lunatic and several bump fire stock equipped AR’s shooting from a Mandalay Bay suite at concert by one of my favorite country artists Jason Aldean. This sounds like the the plot of an action movie. Sadly it’s a grim reality and as I write this fifty nine good people are gone.

I hope I’m wrong but I think we are in trouble this time. If both parties come together for a “Narrow Ban” on devices (accessories) that “legally allow semi-automatic weapons to fire automatically” I feel this will open a door for other “narrow bans” on accessories not considered a firearm. It’s not about the bump fie stock it’s about precedent and that’s a story for a follow up post.

You might also like Fostech Echo II AR Trigger >>>>>

 

BUILD an ARMALITE AR-10 | How do I Build an AR10 Online? | AR308

Republicans May Consider Bump Stock Ban

WASHINGTON — Some key Republicans are showing interest in a narrowly written, Democratic gun-control bill to ban “bump stock” rifle attachments that enable rapid firing.

The bill offered by Sen. Dianne Feinstein, the Senate Judiciary Committee’s top-ranking Democrat, responds to revelations that some of the weapons Las Vegas shooter Stephen Paddock used to commit the worst mass shooting in U.S. modern history Sunday were apparently outfitted — legally — with bump stock devices.

Sen. David Perdue, R-Ga., originally thought bump stocks were illegal. When a reporter told him that they are currently legal, he responded: “I’d look at (Feinstein’s bill), for sure.”

“You can’t buy a chain-fed machine gun in the United States today,” he said. “There’s a reason for that, and I’d want to make sure that nobody has access to that, if that’s the law of the land.”

A gap in current law allows shooters with semi-automatic weapons to accelerate the rate of fire by attaching bump stocks, slide fire devices and other similar accessories. The bump stock automatically forces the trigger back against the shooter’s finger after each shot.

“Some have said we shouldn’t do this now,” Feinstein said. “Now is not the time. When is the time going to be there? There is no better way to honor the 59 people who were slaughtered than to take action to prevent this from happening again.”

On Tuesday, Senate Majority Leader Mitch McConnell, R-Ky., said it was “premature” to discuss “legislative solutions, if there are any,” when asked whether he could support a ban on equipment to convert semi-automatic weapons into automatic ones.

Sen. Richard Shelby, R-Ala., shut down talk of limiting bump stocks quickly.

“I’m a second-amendment man I’m not for any gun control,” Shelby said.

But Sen. John Thune, R-S.D., a member of Senate leadership, said some of his colleagues are “at least interested” in learning more about “that narrow issue.”

“I am somebody who I’d like to think is fairly familiar with a lot of firearms and you know the use of those in that incident out there is something I think we need to take a look at,” Thune said.

Sen. John Cornyn, R-Texas, the second ranking Republican in the Senate, told reporters Wednesday that trigger accelerators “is something that I think bears looking into, and I talked to Chairman Grassley of the Senate Judiciary Committee, and I believe that once the investigation is complete and we learn all aspects of what contributed to this event, then we should have a hearing and look into it.”

Rep. Mark Meadows, R-N.C., chairman of the conservative House Freedom Caucus, said Tuesday he had never heard of a bump stock, even though he owns many guns.

“So certainly if (the bill) made it over here I’d be willing to look at it in a different light but I don’t know enough,” he said. “All I know was what was reported.”

The bill would ban the sale, transfer, importation, manufacture or possession of bump stocks, trigger cranks and similar accessories that accelerate a semi-automatic rifle’s rate of fire.  Feinstein said the “short and plain spoken language” of the bill will let everyone know what is banned, “no matter how fancy the device is.”

Feinstein introduced the legislation with more than 20 Democratic co-sponsors. She said she is working to win Republican support for the bill and plans to reach out to President Trump, who was in Las Vegas Wednesday to console victims of the tragedy.

Trump, a Second Amendment proponent, has avoided questions about gun-control legislation, saying on Tuesday, “We’ll be talking about gun laws as time goes on.”

Sen. Richard Blumenthal, D-Conn., called on Trump to provide leadership and back the bill.

“This device has no purpose but to convert an already deadly weapon into a completely lethal carnage force multiplier,” he said. “It should be banned.”

During her news conference, Feinstein noted that she’s no stranger to “what guns can do.” When she was president of the San Francisco Board of Supervisors in 1978, she discovered the body of the city’s first openly gay supervisor, Harvey Milk, in his office after he was shot by a disgruntled former city employee.

Still, she said she never thought this country would see something like the Las Vegas shooting, where a country music concert was turned “into a battlefield.”

Feinstein said her daughter planned to go to the concert with neighbors, but then both families ultimately decided against it. They planned to stay at the Mandalay Bay hotel, where the shooter carried out his attack on concert-goers below.

“That’s how close it came to me,” Feinstein said. “I just thank God. It’s one of those misses in life. It could happen to any one of us.”

Magpul 25 Round 308 PMAGS, 308 AR PMAGS For Sale Cheap, AR308 Magazines

Save

Save

Save

Save

Save

NIKON BLACK X1000 6x14x50SF 308 SCOPE

NIKON BLACK X1000 6x14x50SF 308 SCOPE

NIKON BLACK X1000 6x14x50SF 308 AR SCOPE

When I saw the Nikon M-308 series 308 AR scopes going out of stock at the usual big name sources I had a suspicion there were new Nikon scopes on the horizon. The scope market is very competitive especially in the $399-$699 price range so it’s no big surprise I was right.  Recently the Nikon Black X1000 Riflescopes became available for purchase. Nikon appears to be marketing their Black1000 scopes and Nikon Black scope mounts towards the “MSR” rifle shooter. If you dont know what an MSR is It’s the new moniker given to the AR-15, AR-10 and 308 AR platforms. MSR is the acronym for “Modern Sporting Rifle”. MSR is marketing disguised as political correctness. That’s a story for another post.

Anyhow the Nikon Black X1000 appear to be priced about $150 less expensive than the Vortex PST Gen II. This is a smart move in my opinion. Nikon also seems to be touting their warranty. Again Nikon is clearly targeting Vortex.

more 308 AR scopes

NIKON BLACK X1000 6x14x50SF 308 SCOPE

Nikon BLACK riflescope series represents a new category of dedicated optics with models engineered for both precision long-range rifle and the action-gun AR enthusiasts. For the precision rifle shooter, BLACK X1000 models feature MRAD or MOA reticles while AR/MSR shooters can take advantage of rapid-action, close-to-intermediate-range targeting capability of the BLACK FORCE1000 riflescope and SPEEDFORCE reticle.

 

NIKON BLACK X1000 4-16x50SF SCOPES

NIKON BLACK X1000 6x14x50SF 308 AR SCOPE RETICLE OPTIONS

NIKON BLACK X1000 6x14x50SF 308 AR SCOPE RETICLE OPTIONS

The 4-16x50SF is a dedicated precision riflescope that offers the precision, the features and the ruggedness serious shooters demand. For starters, it is built with an aircraft grade aluminum alloy 30mm main body tube. With a choice of X-MOA, Illuminated X-MOA or Illuminated X-MRAD reticle, the riflescope delivers 90 total MOA internal adjustment travel for the X-MOA reticle and 25 MRAD for X-MRAD reticles. Its turrets have ¼ MOA or .1 MRAD click graduations yielding 12 MOA / 5 MRAD per revolution depending on variant. All of the 4-16x50SF models have the reticle placed in the riflescope’s second focal plane, so all holdover corrections, ranging and other measurements using the indicated reticle subtensions should be done at 16x magnification.

Nikon’s Illuminated X-MOA and X-MRAD Reticles

Specialized reticles and adjustment systems in BLACK X1000 are glass-etched MRAD or MOA tactical-style variants with illuminated option. Windage and elevation turret internal travel is enhanced for long-range dialing and crisp, click-stop movements operate with no backlash and are both precise and repeatable. The X-MRAD reticle presents the shooter with clean and visually simple, yet highly functional and advanced tools for estimating range, maintaining holdovers or dialing elevation come ups and compensating for wind. An advantage of using these tactical-style reticles is that it can be applied to virtually any shooting application regardless of caliber or ballistic performance, and can be further optimized for specific shooting situations utilizing Nikon’s Spot On Ballistic Match Technology.

Full Multilayer Coatings On All Air-to-Glass Surfaces

With a very capable four-time zoom optical system built with Nikon’s renowned lead- and arsenic-free glass, BLACK X1000 lenses are fully multicoated with anti-reflective compounds for consistently bright, sharp, high contrast sighting at all magnifications.

Turret-mounted Side Focus Parallax Adjustment

Each of the riflescopes in this series features a turret-mounted side focus parallax adjustment to enable fine-tuning of the sight image without changing shooter’s position.

Generous, Consistent Eye Relief and Elevated Windage & Elevation Turrets

Consistent eye relief keeps your brow safe, while the exposed turrets are engraved for maximum readability while offering smooth, repeatable adjustments.

Visit Nikon

Save

Save

BUILD an ARMALITE AR-10 | How do I Build an AR10 Online? | AR308
308AR AR-10 Bolt Carrier Group Link
308AR AR-10 Scope Link
308AR AR-10 Trigger Link
308AR AR-10 Technical Link

WILSON COMBAT HUNTER SERIES 308 AR RIFLES

WILSON COMBAT HUNTER SERIES 308 AR RIFLES

Wilson Combat Ultimate Hunter 308 AR

WILSON COMBAT HUNTER 308 RIFLES

Our friends at Wilson Combat continue to expand and refine their WC-10 “AR-10” line-up and the new “Hunter” series of rifles is evidence to that. Taking advantage of light weight AR furniture and the billet receivers Wilson Combat continues to emphasize light weight 7.7 pound rifles in their Hunter series. Combining form and function the Hunter Series 308 AR’s are some of nicest rifles available.

Visit Wilson Combat, You might also be interested in these Wilson Combat Guns and Accessories.

WILSON COMBAT THE ULTIMATE HUNTER AR308 - 71bs 5oz

WILSON COMBAT ULTIMATE HUNTER 308 AR RIFLE

Bill Wilson’s ideal hunting AR. The medium-lightweight profile barrel will provide amazing accuracy and lightweight portability. The SMOKE COMPOSITES fixed, 100% carbon-fiber stock, lightweight, match-grade button rifled barrel and Wilson Combat M-LOK rail shaves the most weight possible from the AR platform without sacrificing reliability, practical accuracy or durability.

When it comes to lightweight, large bore 308 AR perfection, the Wilson Combat HUNTER series sets the new benchmark for hard hitting, accurate precision semi-auto shooting performance. Designed to be the lightest large bore AR308’s on the market, the HUNTER series from Wilson Combat consists of three all-new models of varying weights and features chambered in high performance precision and hunting calibers

WILSON COMBAT NEW HUNTER SERIES 308 AR RIFLE SPECIFICATIONS
  • Lightweight Billet Upper and Billet Lower Receiver
  • Crowned Muzzle
  • Smoke Composite Carbon
  • Fiber Closed Shoulder Buttstock
  • (Limbsaver Pad on .338 and .3 58)
  • Low Mass Bolt Carrier, Nickel Boron
  • Available Calibers: .308 Winchester, .338 Federal, .358 Winchester, 6.5 Creedmoor
  • Barrel Length:
    • 18” Fluted (.308 Winchester, .338 Federal, .358 Winchester)
    • 20” and 22” Fluted (6.5 Creedmoor)
  • Overall Length: 37.25″
  • Weight Empty: 7lbs 5oz
  • Many Barrel Configurations
  • Lightweight Billet Upper (Flat Top) and Billet Lower Receiver
  • Wilson Combat Ultimate Hunter Match Grade Barrel
  • Rifle Length Gas System with SLR Rifleworks Adjustable Gas Block
  • Crowned Muzzle
  • Wilson Combat 14.6” M-LOK Rail with Three 3 Section MagPul Type 1 Rail Covers
  • Smoke Composite Carbon Fiber Closed Shoulder Buttstock (Limbsaver Pad on .338 and .358)
  • Wilson Combat TTU (Tactical Trigger Unit) M2, 4#
  • Low Mass Bolt Carrier, Nickel Boron
  • BCM Charging Handle, Small Latch
  • Standard Buffer with 43 Coil Chrome Silicon Flat Wire Buffer Spring
  • Mission First Tactical Pistol Grip, Black
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers (Green/Black Standard – Other Colors and Camo Optional)
  • Add on Options for “Kit” version:
    • Leupold VX-2, 3-9×40 LRDX Mounted in 1” Ultralight AR Scope Rings – $390 (.308 Winchester, .338 Federal, .358 Winchester)
    • Burris FFE1 4-14×42 SF BPLX Mounted in 1” Ultralight AR Scope Rings – $460 (6.5 Creedmoor
Wilson Combat WC-10 Operators Manual

WILSON COMBAT TACTICAL HUNTER 308 AR RIFLE

The ideal large bore AR for hunting game or general tactical and defensive use. The threaded, match-grade button rifled barrel is ideal for suppressed shooting and an adjustable buttstock gives you the ability to adapt the gun’s size to various size shooters or for storage use. The new Wilson Combat M-LOK rail is lightweight but rugged and designed for heavy use.

WILSON COMBAT TACTICAL HUNTER 308 AR RIFLE SPECIFICATIONS
  • Available Calibers: 7mm-08 Remington, .308 Winchester, .338 Federal, 6.5 Creedmoor, .260 Remington
  • Barrel Length:
    • 18” Fluted (.308 Winchester, .338 Federal, 6.5 Creedmoor)
    • 18” Non-Fluted (7mm-08 Remington)
    • 20” Fluted (6.5 Creedmoor, .260 Remington)
    • 20” Non-Fluted (6.5 Creedmoor)
  • Overall Length: 35″
  • Weight Empty: 7lbs 11oz
  • Many Barrel Configurations
  • Lightweight Billet Upper (Flat Top) and Billet Lower Receiver
  • Wilson Combat Tactical Hunter Match Grade Barrel
  • Rifle Length Gas System with SLR Rifleworks Adjustable Gas Block
  • Threaded Muzzle with Thread Protector
  • Wilson Combat 14.6” M-LOK Rail with Three 3 Section MagPul Type 1 Rail Covers
  • Rogers/Wilson Super-Stoc
  • Wilson Combat TTU (Tactical Trigger Unit) M2, 4#
  • Low Mass Bolt Carrier, Nickel Boron
  • BCM Charging Handle, Small Latch
  • Standard Buffer with 43 Coil Chrome Silicon Flat Wire Buffer Spring
  • Wilson Combat/BCM Starburst Gunfighter Grip, Black
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers (Green/Black Standard – Other Colors and Camo Optional)
  • Add on Options for “Kit” version:
    • Leupold VX-2, 3-9×40 LRDX Mounted in 1” Ultralight AR Scope Rings – $390 (.308 Winchester, .338 Federal, 7mm-08 Remington)
    • Burris FFE1 4-14×42 SF BPLX Mounted in 1” Ultralight AR Scope Rings – $460 (6.5 Creedmoor, .260 Remington)
WILSON COMBAT TACTICAL HUNTER 308 AR RIFLE
WILSON COMBAT ULTRALIGHT HUNTER 308 AR RIFLE

WILSON COMBAT ULTRALIGHT HUNTER 308 AR RIFLE

When lightweight and compact performance is paramount. This model features our lightweight billet receiver, lightweight bolt carrier, Wilson Combat M-LOK rail, ultralight profile barrel and carbon fiber stock. The Ultralight Hunter has an overall length of 35 1/8” only weighs SEVEN pounds without the magazine making it the lightest large format AR on the market! The Wilson Combat Ultralight HUNTER is easy to carry all day with the guaranteed accuracy, reliability and durability Wilson Combat is known for.

WILSON COMBAT ULTRALIGHT HUNTER 308 AR RIFLE SPECIFICATIONS
  • Available Calibers: .308 Winchester, .338 Federal, .358 Winchester
  • Barrel Length: 16.2″ Non-Fluted
  • Overall Length: 35.5″
  • Weight Empty: 7lbs
  • Many Barrel Configurations
  • Lightweight Billet Upper (Flat Top) and Billet Lower Receiver
  • Wilson Combat Ultralight Hunter Match Grade Barrel
  • Intermediate Length Gas System with SLR Rifleworks Adjustable Gas Block
  • Crowned Muzzle
  • Wilson Combat 12.6” M-LOK Rail with Three 3 Section MagPul Type 1 Rail Covers
  • Smoke Composite Carbon Fiber Closed Shoulder Buttstock (Limbsaver Pad on .338 and .358)
  • Wilson Combat TTU (Tactical Trigger Unit) M2, 4#
  • Low Mass Bolt Carrier, Nickel Boron
  • BCM Charging Handle, Small Latch
  • Standard Buffer with 43 Coil Chrome Silicon Flat Wire Buffer Spring
  • Mission First Tactical Pistol Grip, Black
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers (Green/Black Standard – Other Colors and Camo Optional)
  • Add on Options for “Kit” version:
    • Leupold VX-2, 3-9×40 LRDX Mounted in 1” Ultralight AR Scope Rings – $390 (.308 Winchester, .338 Federal, .358 Winchester)

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM
PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM 2

PROOF RESEARCH CAMGAS GAS SYSTEM

Add Proof Research to the list of 308AR barrel and rifle manufacturers to implement a non standard gas length on their 6.5 creedmoor barrels. Some companies refer to this new length as +2 (plus 2 inches). Proof Research designates their new gas length as “CAMGAS”. Moving the gas ports 2 inches closer to the muzzle adds a bit of dwell to the pressure curve. Basically it tames the action resulting smoother cycling and function. Check availability.

Proof research recommends the JP high pressure bolt. JP uses the high pressure bolt in their +2 rifles. Obviously a +2 gas tube is also required.

PROOF RESEARCH 308 AR PR-10 BARREL 6.5 CREEDMOOR CAMGAS GAS SYSTEM SS

The PROOF Research AR 308 PR-10 barrel provides owners of AR-10-pattern rifles with a 6.5 Creedmoor-chambered rifle that includes a number of enhanced features over traditional barrel styles. These long range specific barrels provide the ultimate in accuracy and will maintain their performance in the harshest of conditions.

The PROOF Research AR 308 PR-10 barrel  uses the company’s innovative CamGas system, which works to reduce the speed of the bolt carrier and improve overall function and reliability of 6.5 Creedmoor semi-auto rifles.

  • Provide shooters with enhanced accuracy on par with match-grade guns
  • Better cooling properties provide improved barrel life
  • POI shift does not occur during extended fire strings
  • The proprietary gas tube is included, but requires use of a JP enhanced high pressure bolt for best function. (452-000-113)

The PROOF Research AR 308 PR-10 barrel is cut rifled from double stressed relived 416R stainless steel and features a threaded muzzle with a 5/8×24 TPI thread pitch for the addition of muzzle accessories.

PROOF RESEARCH CAMGAS GAS SYSTEM

With the release of its new patent-pending Caliber Matched Gas System (CAMGAS) barrels, PROOF Research has eliminated the issues traditionally associated with building 6.5mm and .260 rifles on 308 AR AR-10 platforms. Until now, AR-variant shooters looking for ballistic advantages from either of these calibers were faced with excessive bore pressures that necessitated makeshift solutions such as clipping buffer springs, adjusting buffer weights, and/or relying on adjustable gas blocks, to keep their rifles functioning properly.

PROOF’s R&D team has solved the overpressure issue with gas systems tuned specifically to the cartridge/barrel-length combination. “By moving the gas port, the pressure in the bore is given time to reduce to that comparable of a .308 Winchester with a rifle-length gas system, which is what the 308 AR AR-10 system was designed around,” said Greg Hamilton, PROOF’s research-and-development weapons specialist who’s also a 3-Gun and PRS competitive shooter. “The recoil impulse is noticeably smoother, which helps keep you on target while taking advantage of a more efficient projectile. Case extraction is also easier, with less case-head smearing, so the brass is in much better condition for reloading.”

In recent years, 6.5mm Creedmoor and .260 Remington have become increasingly popular in long-range shooting competitions. The .260 in particular represents an outstanding caliber for a military counter-sniper role—out to roughly 1,000 meters—in smaller- to mid-sized weapon systems. It offers exceptional accuracy and superior ballistics over the ubiquitous .308 while dishing out substantially less recoil and enough energy to make it a legitimate contender for military and law enforcement applications.

“I’ve been using prototype CAMGAS barrels, in both .260 and 6.5 Creedmoor, in competition for almost a year with excellent results,” Hamilton explained. “Both rifles ran flawlessly through high-round, fast-cadence stages, firing hundreds of rounds with 100 percent reliability and zero maintenance or cleaning. From recoil to reliability, every aspect of performance was improved compared to the typical un-tuned barrel.”

PROOF Research currently offers Caliber Matched Gas System barrels chambered for 6.5mm Creedmoor and .260 Remington in three separate lengths: 20, 22, and 24 inches. Every CAMGAS barrel comes standard with an easy to install custom-length gas tube.

Visit Proof Research

FOSTECH ECHO AR-II TRIGGER | DROP-IN TRIGGER

FOSTECH ECHO AR-II TRIGGER | DROP-IN TRIGGER

PICTURE of a FOSTECH ECHO AR-II TRIGGER

FOSTECH ECHO AR-II TRIGGER

Based on a Hiperfire trigger the Echo Trigger has a unique feature that allows an AR to fire when the trigger is pulled and also when released. This translate into much more expensive trips to the gun range. My two initial observations are the trigger is quite expensive and also looks to be pretty complex. At this time I cannot confirm how this trigger functions in a 308 AR or AR-10.  If anyone has any experience with the echo trigger drop us a line. The Fostech Echo AR-II Trigger is in stock and available from Brownells.

The Echo AR-II Trigger allows the shooter to select from 3 different settings.

Safe Mode: Firearm will not fire.
Semi-Automatic Mode: Firearm fires when trigger is pulled.
Echo Mode: Firearm fires when trigger is pulled and also when trigger is released.

The Echo AR-II Trigger is designed with safety being the utmost priority. When the shooter is in the Echo Mode and depresses the trigger one round is fired, if the target moves, the shooter can move the selector to the safe position and a second round will not fire upon release.

The ECHO AR-II TRIGGER has SEVERAL DISTINCT FEATURES

  • PATENTED Design that gained ATF Approval (Patent # US 8,820,211 B1)
  • Technology licensed through HIPERFIRE inside the Echo Trigger
  • Light, clean, and crisp pull in Semi-Automatic Mode
  • The Echo AR-II Trigger is packed full of cutting edge technology
  • Reliable function in Echo Mode .

The Echo AR-II Trigger is for many of the AR-15 platforms but not all.   The Echo AR-II Trigger NO LONGER comes with a stripped carrier with gas key. Customers made it very clear that they did not want to deal with a proprietary carrier.  FosTecH’s team of engineers developed the Echo AR-II so that it did not need that proprietary carrier.  If you have any questions about the Echo-AR-II trigger please go to  www.echoquestions.com  You can also call our office if you would like to talk to someone in person at 812-445-4028

BUILD an ARMALITE AR-10 | How do I Build an AR10 Online? | AR308

MAGPUL PRS GEN 3 STOCK | MAGPUL PRECISION RIFLE STOCK

MAGPUL PRS GEN 3 STOCK | MAGPUL PRECISION RIFLE STOCK

MAGPUL PRS GEN 3 STOCK

The Magpul PRS GEN 3 stock is a field precision rifle stock for 308 AR, AR308 and AR-10 platforms, featuring tool-less length of pull and cheek piece height adjustment.

With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN 3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting. Made in U.S.A. Visit  Magpul.

Magpul PRS Gen 3 Stock Precision Rifle Stock Features

  • Mounts to rifle-length receiver extension tube without A2 spacer but will also accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)*
  • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height
  • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
  • Steel adjustment shafts finished with Melonite® for wear and corrosion resistance
  • All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
  • Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
  • Sling Mounts
    • Front/Rear – rotation-limited QD sling swivel mounts (swivels not included)
    • Rear – 1.25″ aluminum sling loop (left-right reversible)

*NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed.  Mounting to a rifle-length receiver extension is recommended to ensure optimal fit and function.

Magpul PRS Gen 3 Stock Precision Rifle Stock Specifications

  • Weight: 27.8 oz.
  • Weight, w/rifle receiver extension: 31.2 oz.
  • Weight, w/carbine receiver extension:  31.7 oz.
  • Length, max: 11.5-12.9 in.
  • LOP Adjustment Range: 1.4 in.
  • LOP, M16 Collapsed: ~14.3 in.
  • LOP, M16 Extended: ~15.7 in.
  • Cheek Height Adjustment Range: 0.8 in.

* Specifications based on factory configuration.

Magpul PRS GEN 3 Installation Instructions

Magpul PRS GEN 3 Installation Instructions

BUILD an ARMALITE AR-10 | How do I Build an AR10 Online? | AR308