Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set

Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set

Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set

Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set, Product Sku: APPG308004 – The Aero Precision May Builder Set features an M5E1 set with a Desert MAD Dragon Cerakote finish. These sets are hand finished by MAD Custom Coating.

This package deal includes the finished pieces you need to assemble your own Desert MAD Dragon Cerakote M5E1 Rifle, including an M5E1 Enhanced Upper Receiver, 308 AR Generation 2 Lower Receiver, Generation 2 Enhanced Handguard of choice and Billet Trigger Guard all finished in Desert MAD Dragon Cerakote. Stand out at the range with a unique and eye catching build. This is a one time offer for this finish – once they are gone, they are gone!

Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set Includes:

  • M5E1 Enhanced Upper Receiver finished in Desert MAD Dragon Cerakote. Upper receiver is assembled and includes the forward assist, dust cover and barrel nut.
  • 308 AR Gen 2 Stripped Lower Receiver finished in Desert MAD Dragon Cerakote
  • 15″ Enhanced Gen 2 KeyMod or M-LOK Handguard finished in Desert MAD Dragon Cerakote
  • Billet Trigger Guard in Desert MAD Dragon Cerakote

Finish this build off with a matching stock and grip. These accessory pieces are available in a very limited quantity.

This May Builder Set is also available for the M4E1 (AR 15) platform.https://aeroprecisionusa.com/m4e1-desert-mad-dragon-builder-set.html

Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set
Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set
Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set
Aero Precision M5E1 Desert MAD Dragon 308 AR Builder Set

Avantlink


Save

Save

Geissele SSA Trigger | Geissele Trigger SSA | SSA-E

Geissele SSA Trigger

Geissele SSA Trigger, SSA-E Trigger

The Geissele SSA trigger is a semi-automatic only version of Geissele Automatics’s Super Select-Fire trigger. The Geissele  SSA is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The SSA’s two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for CQB. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding applications such as Law Enforcement use, Close Quarters Battle (CQB) and mid-range carbine work.

Size: Standard Mil-Spec Pin, Trigger Bow Type M4 Curved, Weapon Platform AR15, AR-10, 308 AR

You might also like ATC SR Gold Trigger

 

Geissele SSA 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger.

Trigger pull is optimized for both deliberate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds lock time and delivers positive ignition of all ammo types. All contact surfaces are wire EDM cut to exact dimensions for precise engagement free of play.

Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154″ (small pin) mil-spec receiver holes to enable installation with basic tools.

Geissele SSA-E Trigger

Geissele SSA-E Trigger offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154″ diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

Geissele Super Semi-Automatic (SSA) Trigger

GEISSELE SUPER SEMI-AUTOMATIC (SSA®) TRIGGER

The Geissele Super Semi-Automatic (SSA) Trigger is the semi-auto only version of a select fire trigger that Geissele makes for customers in the U.S. Special Operations community. The SSA is a non-adjustable combat trigger, it is not a match trigger. The second stage break is like a carrot rather than an icicle. Suitable for Close Quarters Battle (CQB) and mid-range carbine work, the Geissele SSA is also the perfect trigger for Squad Designated Marksman (SDM) rifles. A short summary of the Geissele SSA features and advantages follows.

Download – Geissele Super-Semi-Automatic SSA Trigger Sales Flyer

Performance Advantages for the Shooter

  • The Geissele SSA Trigger has a pull weight of about 4.5lb. 2.5 lbs on the first stage and 2lb on the second stage. The pull weights and sear engagement are non adjustable by the shooter.
  • Geissele Trigger and hammer are made from quality tool steel
  • Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
  • The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
  • The Geissele SSA trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
  • A full force hammer spring is used for quick lock time and positive ignition of all types of ammo. There is no lightened hammer spring used.
  • The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases lock time and increases accuracy of the weapon, especially for snap shots.

Advantages for the Armorer

  • The Geissele SSA is a simple design that is very similar to the original M16 trigger. The number of parts is identical.
  • There are no adjustment screws to come loose. All springs are captive; they will not get lost during disassembly in the field
  • The entire trigger can be dissembled for cleaning (no rivets or staked parts)
  • The trigger can be installed without removing the safety
  • Sear engagement is pre-set from the factory
  • Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with
    rudimentary tools.
  • Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

Safety Advantages

  • The Geissele SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon.
  • The Geissele SSA has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
  • The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
  • Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is designed to operate in dusty, abrasive environments that cause wear.

*Triggers for Colt large pin rifles are available., *The Geissele SSA does not fit HK416 weapons with firing pin safety

GEISSELE SSA TRIGGER INSTALLATION INSTRUCTIONS

GEISSELE SUPER SEMI-AUTOMATIC (SSA®) TRIGGER INSTALLATION INSTRUCTIONS

READ THIS FIRST – Firearm safety is YOUR responsibility. You must memorize and put into practice the 4 Rules of Firearm Safety:

  1. ASSUME EVERY WEAPON IS LOADED.
  2. KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOU ARE READY TO SHOOT.
  3. DO NOT LET THE MUZZLE POINT AT ANYTHING YOU ARE NOT WILLING TO DESTROY.
  4. KNOW YOUR TARGET AND WHAT IS BEYOND.

GEISSELE SSA TRIGGER INSTALLATION INSTRUCTIONS

  1. Unload rifle and make safe.
  2. Remove existing trigger and clean receiver. It is not necessary to remove the safety.
  3. Remove the trigger pin from the trigger and replace with the slave pin to hold the disconnector in place.
  4. Install trigger and slave pin into rifle. Align slave pin with receiver pin holes. Insert trigger pin into receiver, through trigger/disconnector, and into receiver on opposite side.
  5. Remove hammer pin from hammer. Place a drop of lubricant in the bore of the hammer pivot.
  6. Install hammer into receiver with hammer spring legs on top of the trigger pin. Insert hammer pin into receiver, through hammer, and into receiver on opposite side.
  7. Apply a small amount of lubricant in the following locations: a. Each side of the disconnector above the trigger pin b. Hammer and trigger sears c. Face of the disconnector d. Hammer tail where it contacts the disconnector; e. Top of each side of the hammer spring where the spring contacts the receiver wall.
  8. Check safety operation: With the hammer cocked and the safety selector set to the SAFE position, pull the trigger hard. The hammer should not fall.
  9. Check trigger reset: Set safety selector to FIRE. Dry fire weapon and keep trigger held back. Pull charging handle all the way  back and release, letting the bolt carrier snap forward. The hammer should not fall. Release trigger. Hammer should be caught by the trigger.
  10. Check for the presence of a second stage: Set the safety selector to FIRE. Pull the trigger through the first stage until it comes to a distinct stop—this is the second stage. Applying additional pressure to the trigger will allow the weapon to discharge. Maintenance of the SSA trigger consists of occasionally placing a drop of lubricant on the locations shown in #7 above. Recommended lubrcant is CLP or equivalent; alternatively a high quality grease may be used on the trigger/hammer sears and disconnector contact surfaces. When the trigger and lower receiver well become very dirty (such as when firing with a suppressor), it is not always necessary to remove the trigger group for cleaning. Spray down the trigger group with electrical contact cleaner to remove residual oil and dirt. Next, use compressed air to blow off the trigger group and then flush liberally with a light lubricant as CLP or equivalent. Blow off excess lubricant with compressed air and lubricate as noted above. The Geissele Super Semi-Automatic trigger is a 4.5 lb. non-adjustable precision combat trigger and allows precise and accurate trigger control. The SSA’s two-staged design allows the trigger to be light enough for accurate and precise shots, but heavy and forgiving enough to be safe. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding applications such as Law Enforcement use, Close Quarters Battle (CQB) and mid-range carbine work. The SSA Trigger will lighten the trigger pull relative to a standard trigger. This lightened trigger pull will make the firearm easier to discharge. You must recognize and accept this fact before installing this trigger. If you do not want a lighter than standard trigger pull or are not willing to accept responsibility for the safety of your firearm, yourself, and those around you, do not install this trigger. Geissele Automatics recommends installation by a certified gunsmith only.

.

308 AR Bolt Carrier Group Nitride Coated Brownells

Brownells adds a Nitride Coated, Magnetic Particle Inspected BCG to their 308 Bolt Carrier Lineup. The bolt carrier group comes in at a cost of $169 which is lower than name brand phosphate coated 308 AR Bolt Carrier Groups.

Brownells 308 AR Bolt Carrier Group Nitride Coated MP Inspected

Brownells 308 Winchester, DPMS/SR-25 Pattern, Complete Bolt Carrier Group with Nitride finish, featuring Magnetic Particle Inspected, 9310 Bolt.

Brownells complete 308 Bolt Carrier Group includes all the components necessary to drop into your 308, DPMS/SR25 pattern AR and start running. The black nitride version offers a superior finish, which provides excellent corrosion resistance, while retaining lubricity.  All components are properly machined & heat treated, with the heart being the 9310, Magnetic Particle Inspected Bolt.  This testing ensures that the bolt is free of defects, and the 9310 steel will hold up to the harshest shooting regimen, especially the powerful 308 Winchester, 7.62x51mm NATO or other variant cartridges.

Complete 308 Bolt Carrier Group includes:

  • Fully assembled Bolt Carrier Group; including the bolt, bolt carrier, gas key, firing pin, cam pin, and firing pin retaining pin
  • Every Bolt is Magnetic Particle Inspected (MPI)
  • The Bolt is machined from 9310 steel
  • Following machining, the Bolt is heat treated and shot peened
  • Installed extractor includes black rubber insert with spring
  • Bolt Carrier is machined from 8620 steel and hardened
  • Gas Key Screws are properly torqued and staked
  • Bolt and Bolt Carrier feature a matte black nitride finish

6.5 Creedmoor Military Interest Rumors Continue

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle

6.5 Creedmoor Military Interest Rumors Continue to come in at a brisk rate from military and financial channels. I’ve been at this for a long time and  this story seems to be evidence of a real move by the US military to adopt a more accurate and powerful round than the 5.56 and 7.62 NATO.

New rifle, bigger bullets: Inside the Army's plan to ditch the M4 and 5.56

After carrying the M16 or one of its cousins across the globe for more than half a century, soldiers could get a peek at a new prototype assault rifle that fires a larger round by 2020.

Army researchers are testing half a dozen ammunition variants in “intermediate calibers,” which falls between the current 7.62 mm and 5.56 mm rounds, to create a new light machine gun and inform the next-generation individual assault rifle/round combo.

The weapon designs being tested will be “unconventional,” officials said, and likely not one that is currently commercially available.

Some intermediate calibers being tested include the .260 Remington, 6.5 Creedmoor, .264 USA as well as other non-commercial intermediate calibers, including cased telescoped ammo, Army officials said.

If selected by senior leaders, the weapon could resolve a close-quarters weapons debate about calibers that critics say dates to the 1920s and has influenced military small arms ever since.

If successful, the new rifle and round combination would give troops a weapon they can carry with about the same number of rounds as the current 5.56 mm but with greater range and accuracy in their firepower — with little change in weight.

The new rifle would likely replace the M16/M4 platform, which has been in the hands of troops since the 1960s and undergone multiple modifications and upgrades.

Maj. Jason Bohannon, lethality branch chief at the Army’s Maneuver Center of Excellence at Fort Benning, Georgia, and Matt Walker, deputy director of the branch and a retired command sergeant major, spoke recently to Army Times about broad efforts in small arms weapons research and development.

‘Better option’

Work on the new round began in recent years, Bohannon said, and much of the next steps in developing both the round and rifle will be driven by the Small Arms Ammunition Configuration study.

The study has been going on since at least 2014, according to the Army.

The study is expected to conclude in the next three months, Walker said.

Portions of that report and its findings will likely be made public, but other portions may be deemed sensitive, they said.

Multiple active and retired military arms advocates and industry experts have presented papers and data on the alleged “overmatch” that U.S. troops face on the battlefield with their current calibers.

One oft-noted recent study was authored by then-Army Maj. Thomas Ehrhart, who wrote a 2009 paper titled, “Increasing Small Arms Lethality in Afghanistan: Taking back the Infantry Half-Kilometer.”

The paper drew from soldiers’ experience in Afghanistan firefights.

Ehrhart wrote that half of the firefights infantry units in Afghanistan encountered were past 300 meters, and the 5.56 mm round had lessened lethality at longer distances.

He offered two solutions — a more effective 5.56 mm round, or the “better option” of adopting a caliber in the 6.5 mm to 7 mm range.

The major then cited a 2006 study by the Joint Service Wound Ballistics–Integrated Product Team, which also named the ideal caliber in the 6.5 mm to 7 mm size.

Decades-old debate

This isn’t the first time ammunition experts have reached that conclusion.

“There is a long-running debate, going back almost 100 years now, about the optimal, optimum small arm,” said retired Maj. Gen. Robert Scales, author of the 2016 book “Scales on War: The Future of America’s Military at Risk.”

Scales pointed to the development of the M1 rifle by John Garand in the 1920s.

At the time, Garand built both a .30 caliber and a .276 caliber version of the rifle.

But a surplus of .30 caliber ammunition from World War I, coupled later with the financial constraints of the Great Depression, led to senior defense officials and political leaders calling for a .30 caliber rifle.

The M1’s design eventually evolved into the M14. Both rifles share a 7.62 mm or .30 caliber bore. But the M14 was soon discarded when, in the 1960s, Air Force Gen. Curtis LeMay purchased the early version of the M16 for some Air Force units.

The M16 was then adopted across the branches and fielded for service in Vietnam, where troops reported frequent jamming and malfunctions in early versions of the weapon.

One case, detailed in the 2010 book “The Gun,” by former Marine and award-winning journalist C.J. Chivers, grabbed national attention during the Vietnam War when Marine 1st Lt. Michael Chervenak wrote an open letter that recounted his company’s experiences with the new rifle jamming in combat.

The letter led to hearings in Congress and, along with other incidents, contributed to decades of controversy, modifications and adaptations, which resulted in the current M4 variants, which continue to have their supporters and critics.

Maj. Thomas Campbell, a spokesman for Army Training and Doctrine Command, provided Army Times with the results of a nine-year, post-deployment survey of 9,000 soldiers conducted by the command.

The survey saw 80 percent of troops rate the M4 as “effective or better.”

The survey did not compare the M4 to other weapons, but instead asked the respondents to rate the overall effectiveness of the weapon in the performance of their duties while deployed, Campbell said.

Time to invest

The aging M16/M4 platform is nearing the end of its life cycle, Bohannon said.

“Right now the [M16/M4] platform we have is a workhorse and very effective in the hands of a trained soldier or Marine,” he said.

But, Walker at Maneuver Center added, the Army can’t continue to ask more of the weapon system that has been in service for so long.

“Our next investment will likely be in a new operating platform,” Bohannon said.

Critics of the M16/M4 and the 5.56 mm round say no matter what has been done to improve the M16 and its subsequent variations, the 5.56 mm round lacks the range and lethality needed in modern firefights.

Some of the concerns Scales said he believes are driving military leaders to finally look at an alternative to the 5.56 mm and the M16/M4 include:

— Improvements in adversaries’ body armor, which make the 5.56 mm less lethal.

— Current adversaries such as the Islamic State terror group and others using bigger rounds with more reach against U.S. troops, creating an overmatch.

— Jamming problems with M16/M4 variants that continue to plague the design.

At the 2016 National Defense Industrial Association Armament Systems Forum, retired Brig. Gen. Dave Grange and Jim Schatz, an Army veteran and weapons expert who has since passed away, each gave presentations calling for a new “intermediate caliber” in the 6.5 mm range.

They also referenced the Russian, Islamic State and al-Qaida advantages with longer-reaching and more lethal weapons, including reports of Russian work on their own 6.5 mm assault rifle.

But, Scales said, one of the problems that led to the .30 caliber being adopted over the 6.5 mm nearly a century ago still remains — an abundance of 5.56 mm ammunition stockpiled across U.S. military commands and NATO, whose nations fire the 5.56 mm and 7.62 mm as part of an ammunition standardization agreement made decades ago.

Other weapons work

Meanwhile, the Army’s Maneuver Center isn’t the only entity looking at new or existing small arms replacements.

Marine Corps Times, a sister publication of Army Times, recently reported the Marines are considering equipping nearly every Marine 0311 infantryman with the M27, which first hit the fleet in large quantities in 2010.

The M27 is seen by experts as superior to the M4 in reliability and increased range. But, at $3,000, it runs three times the cost of an M4 and is still chambered in 5.56 mm.

U.S. Special Operations Command is currently testing a new commercially available sniper rifle using the .260 Remington and 6.5 mm Creedmoor rounds, which “stay supersonic longer, have less wind drift and better terminal performance than 7.62 mm ammunition,” said Maj. Aron Hauquitz.

SOCOM is also developing polymer ammunition in 6.5 mm to reduce the weight load.

Current research is showing polymer 6.5 mm reducing weight by one-third from 7.62 mm, reaching nearly the same weight as conventional brass 5.56 mm.

Both regular Army weapons researchers at the Maneuver Center and Marine Corps weapons experts are monitoring the SOCOM testing, officials said.

Military Times

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle
Textron Systems, a private defense industry company, conducted a caliber study using a specially designed .264 caliber cartridge which they said resulted in “terminal effects greater than 7.62 mm NATO out to 1,200 meters” in both their carbine and machine gun.

Data provided by the company showed the machine gun is 7 pounds lighter than the 7.62 mm M240L with 800 rounds of their lightweight ammunition, lowering the combat load by 27 pounds.

The machine gun is also lighter than the M249 SAW, wrote Paul Shipley, chief engineer of light armaments for the company.

While SOCOM is looking at immediate fixes and off-the-shelf options, Bohannon said that the Maneuver Center and related entities working on weapons issues for the regular Army “invests in more revolutionary, long-term” solutions.

Bohannon said that his team has weekly meetings with officials involved with the Joint Service Small Arms Requirements Integration working group, which includes all the services and SOCOM.

While the Army continues to explore existing intermediate rifle/round combinations, their work is only to provide options for senior leadership to choose and then request funding, Bohannon said.

He did not provide cost estimates or a timeline for the potential replacement.

Special Operations Command is looking at a new 6.5 mm round for its sniper rifle

Special Operations Command is exploring a new caliber for its semi-automatic sniper rifle needs and upgrading one of its bolt-action sniper rifle systems.

Maj. Aron Hauquitz told Military Times Tuesday that SOCOM is in the preliminary stages of exploring a sniper rifle chambered in the 6.5 mm caliber. The two commercially available rounds being evaluated are the .260 Remington and the 6.5 mm Creedmoor.

Research shows that both rounds will “stay supersonic longer, have less wind drift and better terminal performance than 7.62 mm ammunition,” SOCOM officials said.

Hauquitz said that the research is focused on the popularity and availability of the cartridge, and finding out the benefits and drawbacks of the different rounds.

At the same time, SOCOM is working to develop polymer ammunition in 6.5 mm to reduce the load for operators, Hauquitz said. Research is showing a one-third weight reduction for 7.62 mm ammunition, allowing the 6.5 mm to come in at 5.56 mm weight ranges.

While both the rifle and the ammunition are being developed together, Hauquitz said the polymer portion of the research would not delay potential fielding of a 6.5 mm rifle.

He didn’t provide a specific date or timeline for when the new rifle would be in operators’ hands but said they would have a better idea regarding the caliber later this year.

“We’re purely in the exploratory phase,” Hauquitz said. “We’re trying to see if we can take a weapon that is 7.62 and give it greater range, accuracy and lethality.”

Hauquitz said the 6.5 mm exploration came out of preliminary results of the Small Arms Ammunition Configuration study, which evaluates for the military commercially available ammunition, emerging ammunition capabilities, and ammunition technologies for conventional and non-conventional calibers.

Last year, the Army chose the smaller Heckler & Koch G28 Compact Semi-Automatic Sniper System for close-quarters fighting to replace the M110 made by Knight’s Armament. Both fire the 7.62 mm round.

At the time, H&K received the $44.5 million contract to manufacture up to 3,643 rifles over two years.

Meanwhile, the changes SOCOM is seeking for its bolt-action sniper rifle became public earlier this month with a “sources sought” notice. The rifle’s development also involves Marine snipers.

The SOCOM contracting office posted the notice for an Advanced Sniper Rifle on the Federal Business Opportunities website on April 6. Industry responses are due on April 24.

SOCOM’s current bolt-action rifle is made by Remington Defense, which won the $79.7 million government contract in 2013 after the initial announcement was posted in 2009. Dubbed the Precision Sniper Rifle, it included three quick-change barrels in calibers 7.62 mm NATO, .300 Winchester Magnum and .338 Lapua Magnum for various distance and power needs.

Lt. Cmdr. Lara Bollinger, a SOCOM spokeswoman, said Friday that the ASR has “far more refined” requirements and performance specifications than the current PSR sniper rifle.

The website states that the posting is not a solicitation or request for proposal but meant to “obtain information for planning purposes only.”

The PSR was designed to replace the three sniper rifles then being used by special ops snipers — the .300 Winchester Magnum MK13, the M40, which shoots 7.62 mm NATO, and the M24, which has separate versions that fire the 7.62 mm NATO and a .338 Lapua Magnum, according to Remington.

The recent announcement asks for industry information about a seemingly identical rifle but adaptable for the 7.62 mm NATO, .300 Norma Magnum and .338 Norma Magnum.

Firearms experts generally cite the Norma Magnum design as producing a faster and more accurate round.

SOCOM listed the following needs for the Advanced Sniper Rifle as a potential Precision Sniper Rifle replacement:

•A light/sound suppressor that can be attached to the system when needed.
•A system that includes three caliber conversion kits that can fire the 7.62 mm NATO, .300 Norma Magnum and .338 Norma Magnum.
•Not to exceed 17 pounds or a total length, without suppressor, of 50 inches.
•A folding or collapsing stock.

The 2013 PSR contract requested up to 5,150 PSRs and 4.6 million rounds of ammunition, according to the Remington website.

During the development of the PSR, the Marine Corps opted to continue to upgrade the M40 sniper rifle platform, which shoots the 7.62 mm NATO, despite some who argued for the larger caliber .338 as an option.

A Marine spokesman said Thursday that they are continuing to make modifications to the M40A6 while also working with the Army and Special Operations Command to develop the Advanced Sniper Rifle.

The modifications include an improved, shorter barrel, modular stock and 1.2-pound weight reduction, said Billy Epperson of Marine Corps Combat Development Command.

The new barrel increases bullet flight stability, he said. The new stock incorporates a folding adjustable buttstock, and additional accessory rails will support aiming lasers and optics. Each rifle also comes with a new pack, ballistic calculator, weather station and chronograph for muzzle velocity recordings.

As the ASR is developed, Epperson said the Marines are “assessing the MK13 as a potential interim solution” to increase sniper teams’ range and lethality.

The .300 Winchester Magnum MK13 has a farther range than the 7.62 mm NATO round the M40A6 uses. The MK13 is a rifle that has been used by Army snipers and other units.

Regular Army snipers continue to use the bolt-action M2010 Enhanced Sniper Rifle, also produced by Remington. It is chambered in .300 Winchester Magnum.

US Army Considers Battle Rifle in 7 62 NATO

US Army Considers Battle Rifle in 7.62 NATO

Soldier Systems: According to multiple sources, what started out as a directed requirement for a 7.62 NATO Designated Marksmanship Rifle for issue to Infantry Rifle Squads has grown in scope to increase the Basis of Issue to all personnel in Brigade Combat Teams and perhaps beyond. The genesis of this requirement is overmatch. The troops feel like they’re in a street fight with a guy with longer arms. The 7.62x54R cartridge gives the enemy those longer arms.

Consequently, the Army wants to enable the rifleman to accurately engage targets at a further range than the current 5.56mm. Although at this point, I’ll keep that exact exact distance close to the vest. The goal here is to foster a dialogue about the 7.62 requirement in general, and not offer operational specifics.

It’s important to establish right up front that 7.62mm is not the Army’s end goal. The “Interim” component of this capability’s name relies on a plan to eventually adopt one of the 6.5mm family of intermediate calibers. Currently, elements of the Army are evaluating .260, .264 USA and .277 USA. The .260 is commercially available while .264 USA and .277 USA are developments of the Army Marksmanship Unit. Unfortunately, the US Army doesn’t plan to conduct an intermediate caliber study until the early 2020s. That’s why they want to adopt 7.62mm now. The idea is to adopt the Battle Rifle to deal with a newly identified threat with what’s available now, and transition the fleet to an intermediate caliber cartridge, once its selected. Additionally, the transition to this proposed intermediate caliber cartridge is possible from a 7.62 platform. Such a transition is all-but-impossible with the current 5.56 receiver sets.

The path of least resistance may well be to adopt an existing 7.62mm Government Off The Shelf (GOTS) weapon. It means less oversight and is quicker to put in action. There are currently four options, although the first one I’ll mention hasn’t even been discussed.

M14 Enhanced Battle Rifle

M14 Enhanced Battle Rifle

First up is the M14 Enhanced Battle Rifle. This option, isn’t even really an option. Brought back into limited service during the early years of the war, it suffers from numerous shortcomings. However, it did validate the need for a 7.62 rifle option.

FN Mk17 SCAR-H

FN Mk17 SCAR-H

Second, is the Mk17 SCAR-H. Built by FN, and designed to meet USSOCOM’s SOF Combat Assault Rifle requirement, it is a modular platform with a simple swap from one caliber to another. This makes it very attractive for a planned transition to a new cartridge. However, the platform was adopted after a competition between 5.56 weapons and was not evaluated for adoption against other weapons in its 7.62 configuration. USSOCOM recently removed all of its SCARs from service so they are there for the taking. Unfortunately, it’s not a panacea. There aren’t nearly enough in inventory so the Army would have to buy more, but that’s true of any of the GOTS options. Finally, the Mk17 uses a proprietary magazine, adapted from the FN FAL which is less than ideal.

KAC M110 SASS

KAC M110 SASS

The third option is the M110 Semi-Auto Sniper System. Currently in service with the Army as a Sniper weapon, it is manufactured by Knight’s Armament Co. As a system, SASS comes with a rather expensive optic and some other accessories not for general issue. On the plus side, it has been adopted by numerous other user groups and a multitide of variants are readily available. It uses what most believe is the best of the 7.62 AR-style magazines and is considered industry standard.

HK M110A1 HK 417 Variant

HK M110A1, HK 417 Variant

The final GOTS option is the newly adopted M110A1, Compact Semi-Auto Sniper System. Manufactured by H&K, it is a variant of their HK417 platform, or more specifically, an Americanized G28 sniper rifle. It utilizes a piston system which many prefer over the M110’s M4-style direct impingement gas operating system. However, as a weapon system, it incorporates an expensive optic and a rather unconventional suppressor system. Additionally, it uses a proprietary magazine. Essentially, it would need to be “dumbed down” for general issue.

It’s important to note that if any of one these platforms is adopted for this role, it will require some changes as mentioned above because they were all adopted for other requirements.

However, the Army may evaluate these GOTS platforms and determine that none of them meet their requirement. In this case they may very well issue an RFP to industry. There are definite long-term advantages to this course of action. For example, the Army can get exactly what they want, rather than adapting a weapon originally procured for another purpose. Additionally, the Army can leverage the latest in small arms technology such as the new short frame receivers. Interestingly, these may well turn out to be more appropriate for use with an intermediate caliber cartridge.

In order to take full advantage of the range of the 7.62 cartridge, the current draft requirement for the IBR calls for a 1×6 variable optic.

Obviously, a transition to the heavier 7.62 cartridge means a reduction in the basic load of the Soldier, to just under half of the current 210 rounds. That is a serious consideration; perhaps the most important for Army leaders to contemplate. Obviously, transition to the intermediate caliber cartridge will mean more bullets per Soldier, but there must be continued development of polymer cases or telescoping rounds to take fully realize this increase in lethality.

Other factors to consider are the additional weight and recoil of a 7.62mm Battle Rifle. Let’s face it, the military transitioned from the M14 to the M16 for multiple reasons, and one of those was weight savings. Soldiers are also going to require additional training to take full advantage of the new capability. Increased engagement distances also mean Soldiers will require access to longer marksmanship ranges.

Additionally, word is that the Army desires a sub-MOA gun. If this is true, they are setting themselves up for failure because M80 Ball is not sub-MOA ammunition. Even the M110 is required to often 1.3 MOA accuracy. Something similar occurred in USSOCOM’s Precision Sniper Rifle program where the ammo was not spec’d to the same level of the rifle which fired it. If the Army tests any of these rifles, even if built to deliver sub-MOA precision, with an ammunition which delivers 2-3 MOA, they will get 2-3 MOA results. It’s the old story of the weakest link, and the capability will be considered a failure because all of the variables weren’t considered. You want an accurate rifle? Make sure you use accurate ammunition.

Then, there’s this whole ‘interim’ concept. Too many times I’ve seen capabilities that were sold initially as an interim and ended up never being replaced with the proposed final capability. There’s always a chance our Soldiers could get stuck with a 7.62 rifle if the planned caliber study doesn’t pan out or worse yet, DoD faces another budget challenged situation similar to the sequester. As we’ve learned, we go to war with the Army we have, not the one we wish we had.

While the change to the intermediate cartridge could be accomplished with bolt and barrel swaps, which is less expensive than completely new rifles, the Army will still need to transition to a new ammunition. That would be two ammunition transitions in less than a decade and three within 15 years, if you consider M855A1.

To be sure, this is a very exciting opportunity for the US Army. It could well mean the first major upgrade to the Soldier’s individual weapon in half a century. My concern, as always, is that the Army doesn’t rush into something it will regret, and that it creates a realistic requirememt, having considered all factors, including ammunition and magazines, which continue to plague the M4. As the DoD budget grows over the next few years, there will be money enough to make rash as well as bad decisions.

On the other hand, there will be institutional momentum against this concept. The Army must not let those voices drown out the requirement to overmatch the reach of our enemies on the battlefield. If the requirement is valid, then it must be supported. The rifle is the most basic weapon in the Army’s inventory.

Instead, the Army must navigate the middle path, carefully considering its near and long-tern requirements. The M16/M4 with its 5.56mm caliber have been in service for over 50 years. The next rifle may well be in service just as long. Or, until Phased Plasma Rifles in the 40-watt range, are available.


US Army 7.62 Rifle Update

Based on briefings conducted at the NDIA Armaments Conference by PEO Soldier’s PM Weapons team, along with discussions with industry, we have an update on Army plans to field a new 7.62 NATO capability within the next 24 months.

First off, although a contract has been awarded for H&K’s Compact Semi Automatic Sniper System, the weapon remains unfunded for FY17. Currently, type classification is planned for FY18.

However, the Army is also committed to concurrently fielding an SDMR based on the same platform as the CSASS.

According to briefing slides provided by PM Soldier Weapons, an Army directed requirement to engage enemy personnel at the Squad level from 0-600m, dated December, 2016 will purchase “6,069 HK G28E rifles” via an urgent material release.

The Army plans to use the existing M80A1 ammo for the SDMR, which is a 7.62 version of the 5.56mm M855A1. The rifles are said to be configured in a similar fashion to the CSASS, with Geissele M-Lok rail and OSS suppressor. However, the SDMRs will be outfitted with an as-of-yet still unselected 1-6x variable optic rather than the CSASS optic from Schmidt & Bender.

While there has been talk of adding up to two SDMRs per Squad, internal Army discussions continue about expanding the basis of issue of a 7.62 rifle, now referred to as the Interim Service Combat Rifle to all BCT members. However, there is still no formal requirement for the ISCR, and acquisition officials are leaning forward on the foxhole in anticipation, prepared to make this happen as quickly as possible.

Save

Save

Save

Wilson Combat Super Sniper 6.5 Creedmoor

Wilson Combat Super Sniper 6.5 Creedmoor

Wilson Combat Super Sniper 6.5 Creedmoor

Unmatched reliability meets pinpoint accuracy in the Wilson Combat Super Sniper, the ultimate semi-automatic sharpshooting platform!

Wilson Combat Super Sniper 6.5 Creedmoor Description

Unmatched reliability meets pinpoint accuracy in the Wilson Combat Super Sniper 6.5 Creedmoor, the ultimate semi-automatic sharpshooting platform! Wilson Combat’s legendary match-grade barrel– the heart of the rifle– elevates it among its contemporaries as the top choice of long range accuracy seekers. The barrel is precision button rifled from 416-R stainless steel, then chambered and reverse crowned for exceptional accuracy. The 1-8” twist chosen for the Super Sniper delivers consistent results all the way to 1000 yards with a broad range of bullet weights. Our BILLet-AR machined-aluminum upper and lower receivers are designed and engineered to close tolerances. These allow for an ideal fit and a precisely bored bolt raceway for smooth operation. Our exclusive Wilson Combat free-floating T.R.I.M rail is a comfortable and versatile handguard platform for mounting your favorite accessories.

Wilson Combat Super Sniper 6.5 Creedmoor Specifications

  • Billet Upper (Flat Top) and Lower Receiver
  • Wilson Combat Recon Tactical Match Grade Barrel
  • Rifle Length Gas System with Lo-Profile Gas Block
  • Threaded Muzzle with Q-Comp Flash Hider
  • Wilson Combat 14” T.R.I.M. Rail
  • Rogers/Wilson Super-Stoc
  • Wilson Combat TTU (Tactical Trigger Unit) Single Stage, 4#
  • Premium Bolt Carrier, MP Inspected, NP3 Coated
  • Armor-Tuff® Finish applied over Mil-Spec Hard Anodized Upper/Lower Receivers
  • Available Calibers: 6.5 Creedmoor
  • Barrel Length: 22″, 24″
  • Overall Length: 44″
  • Weight Empty: 10.2 lbs
308AR AR-10 Bolt Carrier Group Link
308AR AR-10 Scope Link
308AR AR-10 Trigger Link
308AR AR-10 Technical Link