Welcome to 308 AR
Dedicated to AR 308, Armalite AR-10, and 308 AR Semi-Automatic Rifles, Upgrades, Parts, and Accessories.
Visit the 308 AR Forum,
Brownells Branded 308AR Bolt Carrier Group
Brownells Branded 308AR Bolt Carrier Groups come completely assembled and inspected, ready for use in your next 308AR build. Bolt is machined from Vac Arc Premium 9310 Carburizing Steel, providing a high core hardness and high fatigue strength. Bolt is also Magnetic Particle Inspected and shot peened. Extractor is machined from S7 Tool Steel for extended life. Carrier is machined from 8620 steel and properly heat treated. Gas key is machined from 4140 steel and properly staked. Bolt Carrier Groups are available in the standard, mil-spec Phosphate with a Chrome interior, or with a Black Nitride Finish. These 308AR BCGs, are Made in the USA.
308 AR PRS Buttstock Kit
308 AR PRS Buttstock Kit
MBA MODULAR BUTTSTOCK ASSEMBLY Luth-AR
MBA MODULAR BUTTSTOCK ASSEMBLY Luth-AR – Glass-filled nylon rifle stocks fit onto standard A1/A2 buffer tubes and add adjustments and extra features to AR-15 rifles, including most .308 models. Stocks feature textured rubber recoil pads and 2 QD sling sockets for fast sling mounting and dismounting. Modular Stock gives an adjustable cheek rest, and adjustable length of pull. Weighs less compared to other adjustable stocks. Skeleton Stock has futuristic appearance, and helps reduce weight. Will not fit on carbine buffer tubes. Includes Allen wrench for mounting. Uncle Mike’s QD Sockets (593-000-038) can be epoxied into socket on the side of each stock.
LaRue Tactical 16 Inch PredatAR 7.62
LaRue Tactical 16 Inch PredatAR 7.62
LaRue Tactical 14.5 Inch PredatOBR 762
LaRue Tactical 14.5 Inch PredatOBR 7.62 was designed for those who are searching for a hybrid cross between the standard OBR and PredatAR 7.62×51 Rifles. The most remarkable feature of the PredatOBR is its ability to be completely “broken down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR handguard has a locking stainless steel QD Lever system on each side. Once the levers are released, the handguard slides off of the upper assembly in seconds. The PredatOBR’s barrel can easily be removed with the supplied PredatOBR Barrel Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free from Receiver. No need to remove the gas tube, gas block or muzzle device. Reverse the process to reinstall. Hand-tighten Barrel Nut and torque approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of the original.
Aero Precision M5 308AR Stripped Lower Receiver
The Aero Precision M5 308 AR Stripped Lower Receiver helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
Aero Precision 308AR Standard Lower Parts Kit APRH100160
Aero Precision 308AR Standard Lower Parts Kit APRH100160
FAR 308AR Lower Parts Kit Without Trigger
Fulton Armory – FAR 308AR Lower Parts Kit Without Trigger – Fulton Armory – FAR 308AR Lower Parts Kit Without Trigger fits most DPMS compatible 308AR rifles
308 AR Bolt Catch Screw | AR-10 Bolt Catch Pin Comparison
308-AR AR-15 AR-10 Bolt Catch Pin Compatibility 308 AR AR-10 Bolt Catch Pin – The bolt catch pin, one of the smallest parts on the 308 AR, AR-10 and AR-15 platform weapons is a part that can stop an AR-10 308AR build dead in it’s tracks if you didn’t purchase the correct one or the correct LOWER PARTS KIT for your STRIPPED LOWER RECEIVER. Here’s why. The AR-15 platform uses a roll pin and that’s taken for granted when shooters move up to the AR-10 and 308 AR platforms. Unfortunately this is where the topic gets muddy.
308AR AR15 AR-10 Roll Pin Tools
308AR AR15 AR-10 Roll Pin Tools – 308AR AR15 AR-10 Roll Pin Tools – One of my pet peeves from folks who assemble their own AR15 AR-10 308AR rifles is the sloppy installation of the various roll pins the rifles require. In all fairness there are a few roll pins that present a challenge to the inexperienced and experienced alike. The BOLT CATCH ROLL PIN comes to mind as does the FORWARD ASSIST ROLL PIN. The BOLT CATCH ROLL PIN is positioned quite close to the body of the LOWER RECEIVER and requires a ROLL PIN PUNCH to have a flat side to properly install.
Aero Precision Battleworn Orange Grey AR15 Builder Set APPG100025
Aero Precision Battleworn Orange Grey AR15 Builder Set APPG100025 – Aero Precisions October limited run builder set is for the AR15 platform and 308AR or AR-10. Too interesting not to share here though. BlownDeadline is certainly taking cerakote to a new level these days snd the “Battleworn Orange Grey” finish is a testament to that. This picture above reflects a 15″ KeyMod handguard,M-Lok is also available. Visit Aero Precision for ordering information.
Aero Precision Battleworn Orange Grey AR15 Builder Set APPG100025
The October Monthly Builder Set from Aero Precision features a custom Battleworn Orange/Grey Cerakote finish done by BlownDeadline, an industry leader in custom firearms coatings! These pieces feature a custom blend cerakote and are hand finished with no two sets being the same.
This package deal includes the finished pieces you need to assemble your own Battleworn Orange/Grey AR15 M4E1 Rifle, including an M4E1 Upper Receiver, Gen 2 Lower Receiver, Enhanced Handguard and Billet Trigger Guard all custom finished in Battleworn Orange/Grey. Stand out at the range with a unique and eye catching build.
Eotech | Cold Weather Distortion | Reticle Fade | Thermal Drift | Parallax Issues
Eotech Cold Weather Distortion | Eotech Reticle Fade |Eotech Thermal Drift | Eotech Parallax Issues. The issues plaguing some Eotech owners
AR-10 | 308 AR | DPMS 308 | AR 308 | DPMS GII
Learn to build an AR 308, AR-10, 308 AR Rifles! Learn the differences between the 308 AR, AR-10 AR-15 and AR 308 Rifles! Looking for the best 308 Scope for your AR-10, 308 AR, AR308 ? We can help you chose! Looking to buy an AR 308 AR-10 308 AR? Research here first! AR 10 Upper AR 10 Lower AR 308 Parts Tactical Upgrades, 6.5 Creedmoor AR
Links to Other 308 AR | AR-10 | AR 308 Content
Manufacturers | 308 AR Compatibility | Charging Handles | Carbon Fiber Barrels| Barrels | AR Rifle Build Guides | AR Receiver Selection Guide | Trigger Selection Guide | Bolt Carriers | Armalite AR-10 Rifle Parts | AR-10 Rifle Barrel Selection Guide | 308 Scope Selection Guide | Tools | Scope Mounts |