BSF BARRELS 6.5 CREEDMOOR RIFLE+2 GAS 1-8 TWIST 22 INCH FLUTED

BSF BARRELS 6.5 CREEDMOOR RIFLE+2 GAS 1-8 TWIST 22 INCH FLUTED

Picture of a BSF BARRELS 6.5 CREEDMOOR RIFLE+2 GAS 1/8 TWIST 22" BLACK/GRAY FLUTED

BSF Barrels 6.5 Creedmoor Rifle +2 Gas 1/8 Twist - 22" Black/Gray Fluted

After turning down the barrel, BSF Barrels jacket a 416R Stainless steel match barrel in a roll-wrapped carbon fiber sleeve and load it under tension.  BSF Barrels use this jacketing method rather than wrapping the barrel in carbon fiber because this method of wrapping has been proven to trap heat and cause delamination.

 The carbon fiber used is specially designed to move at the same expansion rate as 416R stainless steel. BSF Barrels drill holes into the carbon fiber allowing air to move around the barrel and vent heat quicker without any delamination issues.  Using the Carbon Fiber this way keeps the rifling straighter the warmer the barrel gets because it’s under tension. This allows us to maintain superior stiffness and strength while keeping the barrel extremely lightweight.

BSF Barrels 6.5 Creedmoor Rifle Barrel Specifications:

  • 6 Groove Button Rifling
  • Thread: 5/8″ 24
  • .875 OD
  • Chambered in 6.5 Creedmoor
  • 22″ Rifle+2 Gas
  • Weight 34.7 oz
  • Twist Rate 1:8
  • PATENT PENDING

Visit BSF

ACCU-TAC LR-10 G2 Bipod Picatinny Mount

ACCU-TAC LR-10 G2 Bipod Picatinny Mount

Picture of ACCU-TAC LR-10 G2 Bipod

ACCU-TAC LR-10 G2 Bipod - Picatinny Mount

The picatinny mount, generation two Accu-Tac Model LR-10 Bipod has an astounding 13 inch stance retracted and a 16.5 inch stance fully extended. The LR-10 was designed for the large caliber rifles that need the extra stability for their heavier frame.

ACCU-TAC LR-10 Bipod Description

The Accu-Tac LR-10 Bipod with the quick detach was designed, engineered, and manufactured in the USA with big caliber gun owners in mind. The LR-10 is 100% billet, made from the highest quality aircraft aluminum available. Its wide stance and ratcheted leg extension gives you the adjustability needed for precision aim and repeatability.

You will feel the stability and security of your rifle as never felt before. The updated G2 model has a longer height extension with a total of 10 notches. The LR-10 G2 has the ability to cant which can be locked with its new throw lever.

The quick detach rail mount is simple, quick, and very secure; it attaches to a 1913 Picatinny rail and mounts in seconds without the need to use extra tools for tightening. Our ratcheted leg extension design allows the shooter to quickly adjust to 10 different heights without having to align each leg equally. The spring loaded leg extension retracts quickly with a one-button retraction lever. 

To engage or adjust leg position, simply pull the spring loaded leg downward to move each leg independently. Leg position can be deployed in a 90 degree, 45 degree position either forwards or backwards, locking securely into 5 positions through a 180 degree arc.

ACCU-TAC LR-10 G2 Bipod

Material 6061 T6 Aluminum Alloy
Min. Height 7.0” – 177.8mm (Legs at 45°)
Max. Height 12.0” – 304.8mm (Legs at 90°)
Min. Stance 10.0” – 254mm (Legs at 45°)
Max. Stance 17.0” – 431.8mm (Legs at 90°)
Color Flat Black
Coating Type III- Hard Anodize
Weight 27oz

California Democrats Flex Supermajority With Plans To Pursue Gun Tax

California Democrats Flex Supermajority With Plans To Pursue Gun Tax

California Democrats Flex Super Majority With Plans To Pursue Gun Tax

California Democrats Flex Super Majority With Plans To Pursue Gun Tax

Well it didn’t take long for the Democrats in California to join other similarly anti-gun states to make going after guns their first priority. I think we need to remain extra vigilant as the daily news is dominated and distracted by Trump hate and new anti-gun control proposals may come up without citizens being alerted. I think some of us are in for a rough ride. Fasten your seatbelts folks.

The blue wave that swept through California in the midterm elections gave Democrats a supermajority in both chambers of the state legislature — which means virtually free rein to pursue boundary-pushing liberal policies in the new year.

The state that popularized plastic straw bans and played a critical role in the push for “sanctuary” policies protecting undocumented immigrants may just be getting started.

Having tightened their grip on power in Sacramento, Democrats are on pace to hold 29 of the 40 seats in the state Senate and 60 of 80 in the state Assembly. With a Democratic governor-elect, Gavin Newsom, the veto-proof majorities in the legislature might not be critical on most issues. But they could help ensure passage of any items Newsom might otherwise resist.

Lawmakers already are pushing a number of proposals ahead of the new session in January.  From tighter gun controls to affordable public housing measures, Democrats are readying a raft of bills that would face no meaningful opposition from a depleted Republican minority, provided the party stays united.

“Republicans are politically less relevant in California than they have been in years and it is really up to the Democrats to decide what role they play,” Zev Yaroslavsky, the director of the Los Angeles Initiative at the UCLA Luskin School of Public Affairs, told Fox News. “But as long as Democrats stay unified, they won’t even need bipartisan support.”

One of the pieces of legislation Democrats are looking to quickly pass is Assembly Bill 18, which among other things looks to tax the sale of handguns and semiautomatic weapons in order to generate funding for gun control programs.

a close up of a flag: Party officials survey the damage after a tough midterm election which left Republicans holding just seven of California's 53 House seats; chief correspondent Jonathan Hunt reports.© FoxNews.com Party officials survey the damage after a tough midterm election which left Republicans holding just seven of California’s 53 House seats; chief correspondent Jonathan Hunt reports.

The bill, which was sponsored by Democratic Assemblyman Marc Levine, would implement “an excise tax on the sales of handguns and semiautomatic rifles” and then hand over the resulting revenue to the California Violence Intervention and Prevention Grant Program (CalVIP).

“California needs to bolster violence prevention initiatives so that they are commensurate with our state’s tough gun laws and as effective as violence prevention programs of other states,” Levine said in a statement earlier this month.

California already has some of the toughest gun control laws in the country and, beginning in 2019, state ammunition dealers will be required to maintain logs of all sales – including those of bullets. The state has already restricted online sales of bullets so they can only be delivered to licensed dealers and not someone’s home.

The gun-tax legislation has drawn heavy criticism from gun-rights and hunting groups.

“While the legislation lacks details of how the actual proposal will look, it expresses the intent to place an additional tax on handguns and semi-automatic firearms for distribution to various community-based intervention and prevention programs,” the National Rifle Association’s Institute for Legislative Action stated on its website. “Once again, lawmakers are saddling lawful gun owners with additional taxes and fees for the misdeeds of criminals.”

Along with guns, California Democrats are also looking to crack on the rise of vaping, or e-cigarette use, among teens.

In November, six state senators led by Democrat Jerry Hill introduced a law to ban store sales of flavored electronic cigarettes and other flavored tobacco products.

“We must stop the appalling epidemic of e-cigarette use by youths,” Hill said in a statement. “Enticed by fruit, candy and other appealing flavors, high school and middle school students throughout the U.S. are vaping in record numbers.”

California’s Democratic supermajority also could take up the immigration debate anew.

In early December, Assemblyman Joaquin Arambula introduced legislation that would allow undocumented immigrants over the age of 19 to enroll in Medi-Cal, the state’s low-income health care program. Around 60 percent of the remaining 3 million uninsured Californians are undocumented, and projections put the price tag for the program at around $3 billion per year.

While incoming Gov. Newsom campaigned on creating a universal health care system in the state, it is unclear if he would support Arambula’s measure, which would take a big chunk of the state’s budget.

Besides immigration measures, California Democrats are looking to deal with the state’s mounting homelessness crisis and its problem of affordable housing.

Two measures attempting to tackle the problems were recently introduced. One introduced by state Sen. Scott Wiener would create “right to shelter” for homeless individuals.

“California’s housing crisis, along with our mental health and addiction challenges, are driving people into homelessness, and we must act,” Wiener said. “We must do more to ensure homeless people have access to shelter, as a way to stabilize people’s lives and help them transition to permanent housing.”

Wiener also introduced legislation to give the state more power over land-use decisions and allow developers to bypass local low-density zoning restrictions and build apartment buildings within a half- or quarter-mile of public transit and close to job centers.

While both pieces of legislation are meant to curb homelessness and ease the state’s housing crisis, Republicans and some analysts caution that they could also drain the state’s coffers ahead of a possible economic recession and put Newsom in a tough spot during his first term.

“Hopefully there are enough adults in the legislature to enforce some fiscal discipline,” Yaroslavsky said. “If the state goes broke, it cancels out any of the good that a program can do and the legislature won’t get blamed, it’ll be Newsom.”

Outgoing Gov. Jerry Brown, though, cautioned against presuming the supermajority will have a huge impact. He argued that many Democrats who won were more conservative-leaning, making a two-thirds vote difficult to cobble together on most issues.

“I think the chances of getting the Legislature to vote by two-thirds on new taxes are very, very limited and unlikely,” Brown said, according to The Sacramento Bee.

Save

Save

Save

Save

Save

Save

Save

Save

Vortex Diamondback Tactical 4-16×44 FFP Rifle Scope

Vortex Diamondback Tactical 4-16×44 FFP Rifle Scope

Picture of Vortex Diamondback Tactical 4-16x44 FFP Rifle Scope

Vortex Diamondback Tactical 4-16x44 FFP Rifle Scope DBK-10026

Try not to spit out your coffee as you check the $449 retail, 349 street price of the Vortex Diamondback Tactical 4-16×44 FFP Rifle Scope DBK-10026 after reading about its impressive performance and features. The first focal plane reticle, a feature ordinarily reserved for 4-figure-priced optics, allows shooters to use the information-packed EBR-2C reticle for ranging, holdovers or windage corrections on any magnification. Housed inside its durable, one-piece aluminum tube is a 4x optical system delivering excellent edge-to-edge clarity and sharp resolution. Exposed elevation and windage turrets are low profile enough to stay out of the way in packing situations, but offer the quickness, ease and precision of dialing accurate shots at distance. A side adjustable parallax gives shooters peace of mind by removing parallax error from the equation from 20 yards to infinity.

You also might be interested in the Vortex Viper PST 4-16×50 FFP Rifle Scope

Vortex Diamondback Tactical FPP

Download: Vortex Diamondback FFP EBR-2C MOA Reticle Manual

Download: Vortex Diamondback Tactical FFP Scope Manual

  • The Diamondback Tactical First Focal Plane 4-16×44 stands at the intersection of precision and value, delivering an impressive array of features and performance.
  • Extra-low dispersion glass and fully multi-coated lenses transmit a crisp, bright sight picture. The first focal plane, glass-etched reticle keep subtensions accurate throughout the 4x zoom range.
  • The precision-glide erector system uses premium components in the zoom lens to ensure smooth magnification changes under the harshest conditions.
  • Exposed tactical turrets and a side parallax knob give shooters the tools needed for long distance precision shooting. The fast focus eyepiece allows quick and easy reticle focusing.
  • The single piece 30mm tube is shockproof, ruggedly built to withstand recoil and impacts. Strong o-ring seals and nitrogen purging guarantee waterproof and fogproof performance.

EBR-2C (MOA) RETICLE

Hash-marked ranging reticle using MOA or MRAD based subtension lines for ranging, holdover, and windage corrections

Vortex Diamondback Tactical 4-16x44 FFP Rifle Scope  EBR-2C MOA Reticle Subtensions

Save

Save

Save

Save

Save

Save

Save

Save

MID EVIL INDUSTRIES 360 VFG RFG QUICK DETACH MINI TRIPOD

MID EVIL INDUSTRIES 360 VFG RFG QUICK DETACH MINI TRIPOD

Mid-Evil Industries 360 VFG/RFG Quick Detach Mini Tripod

The Mid-Evil Industries 360 VFG/RFG Quick Detach Mini Tripod,( yes I wrote TRIPOD) is designed to be used with the Mid-Evil Industries 360 Vertical Foregrip. The video below states other mounts are coming including Picatinny. I haven’t been fond of other foregrip tripods but the Mid-Evil seems to go to a new level. The tripod looks as though it’s roots are of photography origin between the ball head, construction, and finish.

What do you think of this tripod? Can it replace your current foregrip bipod or tripod? or even your traditional Atlas, Harris, or Magpul bipods?

Picture of Mid-Evil Industries 360 VFG/RFG Quick Detach Mini Tripod

Mid-Evil Industries 360 VFG/RFG Quick Detach Mini Tripod

The 360° VFG QD-TRI POD by Mid-Evil Industries is the next evolution in Quick Detach accessories. This is the 1st ever Quick Detach Mini Tripod (can also be used as a bipod) compatible with and exclusive to the 2nd Generation 360° VFG/RFG (Vertical Fore Grip/Rotating Fore Grip). The adjustment possibilities are almost infinite. Smooth 360 degree rotation and a full tilt function allows you to acquire targets quickly for an accurate shot every time.

The Quick Detach Tripod has a single hand operated lock & unlock mechanism. There’s no button, no twisting – just a simple slide down to release & slide up to lock. It can be set to 3 different angles (20°, 50° & 78°). Just push, click & lock – easy to use. It is constructed of aluminum and has extreme temperature resistance, is sturdy, long lasting and lightweight with a high quality finish.

RADIAN RAPTOR CHARGING HANDLE DPMS G2 308

RADIAN RAPTOR CHARGING HANDLE DPMS G2 308

Picture of RADIAN RAPTOR CHARGING HANDLE DPMS G2 308

RADIAN RAPTOR CHARGING HANDLE DPMS G2 .308

The Radian Raptor Ambidextrous Charging Handle is now available for the DPMS G2 and other small frame .308 rifles, including the Adams Arms SF 308 and Zev Technologies SF-MATEN. Machined from 7075-T6 aluminum with MILSPEC Type III Hardcoat anodized finish, the Raptor for DPMS G2 features the same rugged durability and function you expect from Radian products. Like all Radian products, the Raptor is 100% designed and manufactured in the U.S.A.

RADIAN RAPTOR G2 CHARGING HANDLE

Features of Radian Raptor DPMS G2 Ambidextrous Charging Handle

  • Ambidextrous for use from strong side or support side.
  • Deep grooves on release levers are easy to locate in low light and easy to use with wet, cold or gloved hands.
  • Solid feel and dependable, smooth operation.
  • Smoothly machined edges reduce snags and are easy on your hands.
  • Design gives rifle a unique, aggressive appearance.
  • Precision machined from 7075-T6 aluminum.
  • Milspec Type 3 Hard Coat Anodized Finish.
  • Compatible with DPMS G2 and many other small frame .308 rifles.
 

AERO PRECISION M5E1 AMMO CAN BUILDER SET

AERO PRECISION M5E1 AMMO CAN BUILDER SET

Picture of a AERO PRECISION 308 AR M5E1 AMMO CAN BUILDER SET
Picture of an AERO PRECISION AR 308 M5E1 AMMO CAN BUILDER SET

AERO PRECISION 308 AR M5E1 AMMO CAN BUILDER SET

The Aero Precision October Builder Set features an M5E1 set with a Ammo Can finish done by Blown Deadline.

This package deal includes the finished pieces you need to assemble your own Ammo Can M5E1 Rifle, including an M5E1 Enhanced Upper Receiver, M5 (.308) Lower Receiver and our Gen 2 Enhanced Handguard of choice all finished in custom Ammo Can. Stand out at the range with a unique and eye catching build. This is a one time offer for this finish – once they are gone, they are gone!

Includes:

  • M5E1 Enhanced Upper Receiver finished in Ammo Can. Upper receiver is assembled and includes the forward assist, dust cover and barrel nut.
  • 15″ Enhanced Gen 2 KeyMod or M-LOK Handguard finished in Ammo Can
  • M5 (.308) Lower Receiver finished in Ammo Can

This October Builder Set is available in M4E1 (AR15) 15″ ATLAS R-ONE Threaded, M4E1 (AR15) 9″ Enhanced Handguard, M4E1 (AR15) 15″ Enhanced Handguard, M4E1 (AR15) 9″ M-LOK ATLAS S-ONE Threaded, M4E1 (AR15) 15″ ATLAS S-ONE Threaded or M5E1 (.308) Enhanced configurations.

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >