AERO PRECISION M5E1 AMMO CAN BUILDER SET

AERO PRECISION M5E1 AMMO CAN BUILDER SET

Picture of a AERO PRECISION 308 AR M5E1 AMMO CAN BUILDER SET
Picture of an AERO PRECISION AR 308 M5E1 AMMO CAN BUILDER SET

AERO PRECISION 308 AR M5E1 AMMO CAN BUILDER SET

The Aero Precision October Builder Set features an M5E1 set with a Ammo Can finish done by Blown Deadline.

This package deal includes the finished pieces you need to assemble your own Ammo Can M5E1 Rifle, including an M5E1 Enhanced Upper Receiver, M5 (.308) Lower Receiver and our Gen 2 Enhanced Handguard of choice all finished in custom Ammo Can. Stand out at the range with a unique and eye catching build. This is a one time offer for this finish – once they are gone, they are gone!

Includes:

  • M5E1 Enhanced Upper Receiver finished in Ammo Can. Upper receiver is assembled and includes the forward assist, dust cover and barrel nut.
  • 15″ Enhanced Gen 2 KeyMod or M-LOK Handguard finished in Ammo Can
  • M5 (.308) Lower Receiver finished in Ammo Can

This October Builder Set is available in M4E1 (AR15) 15″ ATLAS R-ONE Threaded, M4E1 (AR15) 9″ Enhanced Handguard, M4E1 (AR15) 15″ Enhanced Handguard, M4E1 (AR15) 9″ M-LOK ATLAS S-ONE Threaded, M4E1 (AR15) 15″ ATLAS S-ONE Threaded or M5E1 (.308) Enhanced configurations.

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

Remington Defense R10 SA 308 16 MBUS STR RAHG 86361

Remington Defense R10 SA 308 16 MBUS STR RAHG 86361

Remington Defense R10 SA 308 16" MBUS STR RAHG 86361

Remington Defense R10 SA 308 16″ MBUS STR RAHG 86361

With over 200 years of experience in the design and manufacture of firearms, Remington has history of producing some of the finest firearms in the world and the Remington Defense R10 SA 308 is just another notch in Remington’s belt. The Remington Defense R10 SA 308 16″ is built on the AR direct impingement rifle platform and chambered in the accurate and heavy hitting 7.62x51mm NATO/.308 Winchester cartridge. Both the upper and lower receivers are hard coat anodized to ensure a durable and non-reflective finish. The carbine length barrel is 16 inches long and has a 1:10” twist perfect for stabilizing heavy 174+ grain bullets, the ideal ammunition for a medium to long range tactical rifle. The muzzle is 5/8×24 tpi threaded, making it compatible with the vast majority of muzzle attachments for .308 Win barrels.

The handguard is Remington’s RAHG design, with a top rail for optics and/or laser, then 7 other mountable surfaces with M-LOK style attachment points. The rifle features ambidextrous controls for the magazine release, bolt-release, and safety selector making this rifle a great option for left-handed shooters. The Remington Defense R10 SA 308 rifle features Magpul’s MOE SL-S telescoping stock, which has 6 positions for adjusting to the ideal length of pull and has a generous cheek weld. One the most useful features of the SL-S are the two battery compartments built into the stock that are sealed with O-rings to ensure the compartments are waterproof up to 10 meters and at only 2.4 inches wide it’s the narrowest storage stock on the market.

Whether you’re looking to purchase a modern sporting rifle (MSR) for late night hog hunts or are looking to add a designated marksman rifle (DMR) to your station’s armory, the Remington R10 rifle is designed to meet every expectation you have for a semi-automatic medium to long range rifle.

Remington Defense R10 SA 308 Additional Features

Geissele 2-Stage Trigger with a 2.5 lb. first stage and a 2.0 lb. second stage adding up to a clean 4.5 lb. trigger pull.
Comes with 3 RAHG M1913 style rails for adding mission required attachments to the handguard.
Magpul MOE grip with storage compartment is ideal for storing small parts, tools, and batteries.
Magpul MBUS front and rear flip sights are designed to not impede view of primary sight while providing a reliable and accurate backup sight option.
Rifle comes with (2) 20 round magazines from Lancer Inc.

Remington Defense R10 SA 308 16" MBUS STR RAHG 86361 Specifications

Specifications

Caliber: 7.62x51mm NATO / .308 Winchester
Weight: 8.8 lbs.
Rifle Overall Length: 34.5″
Action: Direct Impingement – Semi-Automatic
Trigger: Geiselle 2-Stage
Safety: Safety Selector
Rifle Barrel Length: 16″
Rifle Barrel Twist: 1:10″
Rifle Stock: Magpul MOE SL-S
Scope Mount: M1913 Picatinny Rail
Magazines Included: (2) 20 Round
Handedness Ambidextrous
Item Condition New
MPN 86361
<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

SAVAGE MSR 10 LONG RANGE 6 5 CREEDMOOR RIFLE 22905

SAVAGE MSR 10 LONG RANGE 6 5 CREEDMOOR RIFLE 22905

SAVAGE MSR 10 LONG RANGE 6.5 CREEDMOOR RIFLE 22905
SAVAGE MSR 10 LONG RANGE 6.5 CREEDMOOR RIFLE - 22905

SAVAGE MSR 10 LONG RANGE 6.5 CREEDMOOR RIFLE - 22905

The SAVAGE MSR 10 LONG RANGE 6.5 CREEDMOOR RIFLE  Model #22905 packs all the features and upgrades you would expect from a Savage precision rifle into a single platform. This MSR 10 is chambered in 6.5 Creedmoor and is built on a compact frame with a non-reciprocating side charging handle. It’s BLACKHAWK!® nickel boron treated two-stage target trigger and Magpul PRS® adjustable buttstock optimize the inherent accuracy of the upgraded Savage barrel, which features 5R rifling and a Melonite QPQ finish.

Visit Savage Arms

SAVAGE MSR 10 LONG RANGE 6.5 CREEDMOOR RIFLE SPECIFICATIONS

SKU: 52179, UPC: 011356229052, MFR#: 22905
  • Action Type: Direct-impingement semi-auto
  • Caliber: 6.5 Creedmoor
  • Capacity: 10
  • Finish: Matte black hardcoat anodized receiver and Melonite QPQ barrel
  • Barrel Length: 22&rdquo
  • RIFLING: 1:8″ 5R Right-hand
  • Length: 43 5/8&rdquo
  • Weight: 10 pounds
  • Barrel: Fluted heavy barrel with Melonite QPQ finish
  • Handguard: Free-float M-LOK®
  • Stock: Magpul® PRS Gen3 buttstock
  • Trigger: BLACKHAWK! Two-stage target trigger with Nickel Boron treatment
<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

BROWNELLS BRN-10 RETRO RIFLE AR-10 308 22IN BARREL

BROWNELLS BRN-10 RETRO RIFLE AR-10 308 22IN BARREL

Picture of a BROWNELLS BRN-10 RETRO RIFLE AR-10
Picture of a Brownells AR-10 Retro Rifle BRN-10 308 Winchester

BROWNELLS BRN-10 RETRO RIFLE AR-10

For the first time in Brownells history, the company is manufacturing complete guns of its own in addition to selling tools, components and firearms made by other companies. It should come as no surprise that the new rifle line-up is composed of AR-15s and AR-10s considering the company’s long standing relationship with these platforms. However, the Brownells choice to offer carefully researched “retro” reproductions of historically significant models is certainly a refreshing one for enthusiasts and collectors alike.

Brownells BRN-10 AR-10

The first four Retro AR-15s are chambered for .223 Rem./5.56 NATO. The BRN-16A1 is a semi-automatic version of the iconic M16A1 first fielded in the 1960s with matte gray anodized receivers, properly contoured black polymer furniture and a lightweight 20” M16A1 chrome-lined barrel. The BRN-601 is based on the original USAF contract rifle with green furniture, a slabside lower receiver and a triangular 601 charging handle. The XBRN16E1 reflects the transitional rifle in between 601 and M16A1, with features of both. The XBRN-177E2 is an authentic reproduction of an early Special Forces carbine featuring a period-correct flash hider with grenade ring, a full-fence M16A1 lower receiver and a collapsible stock.

The two variants of the BRN-10 rifle, based on the AR-10, are chambered in .308 Win./7.62 NATO. These models have the “trigger style” charging handle located on the top of the receiver inside the carry handle along with the same lines and contours as the first production AR-10s from the 1950s. With receiver sets designed in conjunction with FM-Products, these rifles are compatible with standard DPMS/SR25 components including triggers, magazines, barrels, bolt carrier groups and furniture sets. The BRN-10A (shown) has the same brown furniture found on early rifles, like the models issued by the Netherlands, while the BRN-10B is based on later models adopted by Cuba and other nations.

Brownells is taking pre-orders for Retro rifles now with shipping dates slated for the Spring of 2018.

Brownells BRN-10 AR-10

A Piece of History, Fresh from the Factory & Ready To Shoot

The BRN-10™ by Brownells is a recreation of Eugene Stoner’s original lightweight .308 caliber battle rifle that revolutionized rifle design forever. For the first time, it is possible for the shooter of average means to own – and shoot – a meticulously detailed, factory-new, semi-auto replica at a fraction of a scarce original’s price. The BRN-10™ accurately replicates the original .308 AR in great detail – and it’s built to modern standards using the latest manufacturing technology.

21st Century Technology Meets Historical Detail. Designed in partnership with FM Products, our BRN-10™ receivers are fully machined, not forged, from 7075 T6 aluminum billet. The distinctive lines of late Armalite® AR-10® rifles are carefully reproduced, including the slab-sided lower with straight magazine well. Takedown pins, selector lever, magazine release, and bolt release all have crisp horizontal serrations that match the original rifles.

Clean, Uncluttered, Still “Futuristic”. The absence of a forward assist and shell deflector makes the BRN-10™ upper unusually uncluttered. Up top is the original “trigger”-style charging handle prominently located under the carry handle and positioned for rapid, easy operation – a practical benefit somewhat lost with the later charging handle location.

The BRN-10’s rear sight is fully enclosed by the carry handle, like the original. A simple, A2-style horizontal thumbwheel lets you adjust elevation, while windage is changed by loosening a setscrew and drifting the rear peep. A small window in the rear of the carry handle lets you see the current elevation setting.

Detail Under the Hood. Inside the BRN-10™, the carrier has the distinctive flats and two stabilizing flanges at the rear found on early carriers, and the entire bolt/carrier group is chrome-plated. The bolt itself is machined from 9310 carbon steel and magnetic particle inspected (MPI) to make sure there are no microscopic flaws that could cause premature failure – a benefit the original guns did not have.

The BRN-10’s 20″ barrel, chambered in .308 Winchester, is made for Brownells by Faxon. It first gets a QPQ Nitride finish for excellent resistance to surface wear. After nitriding, the barrel gets top coat that replicates the look of the classic manganese phosphate finish found on the 1950s rifles.

The handguard drops in like a standard AR-15 handguard, but its external contours replicate the original AR-10® ’guard. Buttstock and pistol grip are from the Brownells Retro line; the buttstock is a Type D stock, without a trap door.

Choose Your Model. The Brownells BRN-10™ rifle is available in two models. The BRN-10A leans heavily on the earliest rifles, with an open 3-prong Dutch-style flash hider, functional heavy fluting on the barrel under the handguard, and brown furniture that mimics the look of the original fiberglass. The BRN-10B is inspired by later export rifles and has a closed-prong, Portuguese-type flash hider, later-style black furniture, and a lightweight barrel that makes for a surprisingly quick-handling .308 rifle.

Up-to-Date & Compatible. Brownells BRN-10™ rifles accept standard metal DPMS/SR-25 magazines. They are NOT compatible with Magpul PMAGs due to lower receiver contour. A majority of the components on the BRN-10™ are compatible with modern DPMS/SR-25 parts or AR-15 parts. See Compatibility Notes below.

Brownells BRN-10™ Features & Details:

Receivers machined from billet 7075 T6 aluminum
.308 Winchester chambered, 20″ barrel with 1-10″ twist
.750″ diameter at the gas block
“Trigger”-style charging handle on top of receiver, under carry handle
Chrome-plated bolt/carrier group with period details
Magnetic particle inspected 9310 carbon steel bolt
Brownells Retro buttstock assembly & pistol grip
Flat slip ring assembly
Standard AR-15-style front sight base
Period-style rear sight
5/8″-24 tpi muzzle threads
Rifle receiver extension (buffer tube) with correct rifle buffer & spring
42″ OAL
Accepts standard, metal DPMS/SR-25 magazines (Magpul PMAGs will NOT work)
Comes with one 20-round Brownells aluminum magazine, chamber safety flag, safety manual, and copy of the USGI Field Manual

BRN-10A Features & Details:

Heavy-contour barrel with aggressive fluting underneath the handguard
Open, 3-prong, Dutch-style flash hider with black QPQ Nitride finish
Brown Retro furniture to replicate original fiberglass look
9 lbs. wt.

BRN-10B Features & Details:

Lightweight barrel
Closed-prong, Portuguese-style flash hider with black QPQ Nitride finish
Black Retro furniture to replicate later production AR-10® rifles
8 lbs. wt.

Compatibility Notes: DPMS/SR-25 compatible parts on the Brownells BRN-10™ rifle include: magazine, bolt/carrier group, barrel assembly, barrel nut, slip ring assembly, crush washer, muzzle devices, buffer, buffer spring, handguard, magazine latch, and magazine release spring.

AR-15 compatible components include: front sight base assembly, gas tube, handguard cap, drop-in GI-style handguards, receiver extension (buffer tube), buffer retainer & spring, takedown detents & springs, selector, selector detent & spring, trigger assembly, buttstock assembly, and pistol grip & screw.

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

PSA Gen2 PA10 18″ Mid-Length .308 WIN Nitride Classic Rifle

PSA Gen2 PA10 18″ Mid-Length .308 WIN Nitride Classic Rifle

Palmetto State Armory PSA Gen2 PA10 18" Mid-Length .308 WIN Nitride Classic Rifle

Palmetto State Armory PSA Gen2 PA10 18" Mid-Length .308 WIN Nitride Classic Rifle Part Number 516446285

The PSA Gen2 PA10 18″ Mid-Length .308 WIN Nitride Classic Rifle is among the cheapest AR10, 308 AR styled rifles to date. In fact the PSA PA10 is for sale at a price lower than most 308 OEM style rifles. When the PSA PA10 was released a few years ago not all the bugs were worked out of the PSA 308 hardware. Same can be said for many other brands as well. That was then this now. As of this writing Palmetto State Armory is on their second generation of the PA-10 aptly named PSA Gen2 PA10 and there are now many happy owners making themselves known on the 308 AR Online Forum.

Note: PSA also offers an ample supply of 308 parts to build your own PA-10 or compliment an existing rifle with a new upper. Buy a spare upper for $149 and get started on a 6.5 Creedmoor AR….you know you want to.

Palmetto State Armory PSA Gen2 PA10 18" Mid-Length .308 WIN Nitride Classic Rifle

 PSA Gen2 PA10 18″ Mid-Length .308 WIN Nitride Classic Rifle – 516446285

Barrel: Machined from 4150V steel, chambered in .308 WIN with a 1/10 twist, mid-length gas, and nitride treated for accuracy and durability.   Upper has a front sight post gas block, Classic Midlength Handguard, and a  A2-style muzzle device.

Upper:  Precision machined from forged 7075-T6 aluminum, then Black anodize hardcoated to MIL-8625 Type 3 class 2.

Bolt Carrier Group:  9310 steel bolt assembly, nitride treated for durability.  8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners.  Charging handle is also included.

Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2.   With an AR-15 style fire control group, and Classic M4 Stock, and classic A2 grip, the PSA PA10 allows the same configuration flexibility as enjoyed by the AR15, and is an ideal platform for the 308 cartridge.

Palmetto State Armory PSA Gen2 PA10 18" Mid-Length .308 WIN Nitride Classic Rifle Specifications

SKU: 516446285
UPC: 516446285
MFR#: 516446285

Barrel Length: 18”
Barrel Material: 4150V Chrome Moly Steel
Barrel Profile: A2
Chamber: .308 WIN
Twist Rate: 1 in 10”
Extension: M4
Gas System: Mid-Length
Gas Block Type: Front Sight Base .750”
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with feedramps
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: Classic Midlength Polymer
Handguard Style: Polymer
Handguard Length: N/A
Bolt Steel: 9310, Nitride
Bolt Carrier Steel: 8620, Nitride
Staked gas key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Mil-spec style
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: PSA M4 Stock
Grip: PSA Classic A2 Grip, Black
Magazine: 20 Round PMAG
Weight as Configured: 10.4 lbs

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >

DIAMONDBACK DB1065CB 6.5 CREEDMOOR AR308 (Cheap)

DIAMONDBACK DB1065CB 6.5 CREEDMOOR AR308 (Cheap)

Picture of a DIAMONDBACK DB1065CB 6.5 CREEDMOOR AR10

DIAMONDBACK DB1065CB 6.5 CREEDMOOR AR308

Hat tip to follower Scott D for making us aware of the Diamondback DB10 line of 308 AR Rifles. Product Specs Model: DB1065CB Caliber: 6.5 Creedmoor Finish: Black Anodized Hardcoat Barrel: 20” Stainless Steel Fluted Twist: 1:8 Gas System: Rifle Length Gas System Bolt Carrier Group: Azimuth Black Nitride, AR 10 Carrier w/ Multi-Cal Bolt, DPMS Style Barrel Extension, High Pressure Firing Pin Lower Receiver: Forged 7075 T6 Aluminum Upper Receiver: Flattop Forged 7075 T6 Aluminum, T-Marked Handguard: 15” M-LOK Rail Selector: Ambidextrous Safety Selector Grip: Fab Defense Rubberized Ergonomic Pistol Grip Stock: Fab Defense GL Shock Mag: 5 and 20 Round Metal Mag Weight: 9lbs 1oz. Overall Length (Stock Collapsed): 38.5” Overall Length (Stock Expanded): 41.75” Muzzle Device:

See Additional Diamondback Firearms

<center><script type="text/javascript" src="//www.avantlink.com/link.php?ml=635841&p=7835&pw=18199&ctc=Home Page&open=_blank"></script></ >